تعارف
This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Amazon Basics Heavy-Duty Tilting TV Wall Mount and High-Speed HDMI Cable. This wall mount is designed to securely hold flat-panel televisions ranging from 37 inches to 80 inches, with a maximum weight capacity of 120 pounds. The included HDMI cable supports Ethernet, 3D, and 4K video, along with Audio Return Channel (ARC) for versatile connectivity.
Please read this manual thoroughly before beginning installation to ensure correct setup and to prevent damage to the product or injury.
حفاظت جي ڄاڻ
خبردار: Failure to read and follow all instructions can result in personal injury or property damage. The manufacturer is not responsible for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
- Ensure the wall structure can safely support the combined weight of the mount and the television. Consult a qualified professional if unsure.
- وڌ ۾ وڌ وزن جي گنجائش 120 پائونڊ (54.4 ڪلوگرام) کان وڌيڪ نه ڪريو.
- This mount is intended for use with flat-panel TVs between 37 and 80 inches.
- Always use appropriate safety gear, including eye protection, during installation.
- Verify the location of electrical wires, water pipes, and gas lines behind the wall before drilling.
- Two people are recommended for installation due to the size and weight of TVs.
- سڀئي ننڍا حصا ۽ پيڪنگنگ مواد ٻارن کان پري رکو.
پيڪيج مواد
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, do not attempt to install. Contact customer support for assistance.
- Wall Plate Assembly (1)
- ٽي وي لڳائڻ وارا بریکٹ (2)
- High-Speed HDMI Cable (1)
- Hardware Kit (various screws, washers, spacers, anchors)
- هدايت نامو (هي دستاويز)
سيٽ اپ ۽ تنصيب
اوزار گھربل (شامل نه آھي):
- ڳولهيندڙ
- Drill with appropriate drill bits (wood/concrete)
- Level (though one is built into the mount)
- فلپس سر ڇڪڻ وارو
- Socket wrench or adjustable wrench
- پنسل
- ماپڻ وارو ٽيپ
مرحلا 1: چڙهڻ جي جڳھ جو تعين ڪريو
Choose a location on your wall that is structurally sound and free from electrical wires, water pipes, or gas lines. Use a stud finder to locate wood studs if mounting to drywall, or ensure you have appropriate concrete anchors if mounting to masonry.
Step 2: Mount the Wall Plate
- Hold the wall plate against the wall at the desired height. Use the built-in level to ensure it is perfectly horizontal.
- Mark the drilling locations through the holes on the wall plate with a pencil.
- Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the anchors/lag bolts being used.
- Secure the wall plate to the wall using the provided lag bolts and washers. Ensure it is firmly attached and level.
Step 3: Attach TV Mounting Brackets to TV
- Lay your TV face down on a soft, clean surface to prevent screen damage.
- پنھنجي ٽي وي جي پٺيءَ تي ويسا چڙھيل سوراخن جي سڃاڻپ ڪريو.
- هارڊويئر ڪِٽ مان مناسب اسڪرو، واشر ۽ اسپيسر چونڊيو جيڪي توهان جي ٽي وي جي ماؤنٽنگ هولز ۾ مناسب هجن.
- Attach the two vertical TV mounting brackets to the back of your TV, ensuring they are centered and aligned with the VESA pattern. The hooks on the brackets should face upwards.
Step 4: Mount TV to Wall Plate
- With assistance, carefully lift the TV and hook the brackets onto the top edge of the wall plate.
- Gently lower the TV until the brackets fully engage with the wall plate. You should hear a click or feel it lock into place.
- Pull the release strings (if applicable) to ensure the TV is securely latched to the mount. Some models have safety screws to further secure the TV; tighten these if present.
Step 5: Connect HDMI Cable
Connect one end of the included High-Speed HDMI cable to the HDMI output port on your source device (e.g., Blu-ray player, game console, streaming device) and the other end to an HDMI input port on your TV.
آپريٽنگ هدايتون
ٽي وي کي جهڪائڻ:
This wall mount allows for 18 degrees of tilt, ranging from +15 degrees (upward) to -3 degrees (downward), to achieve an optimal viewing angle and reduce glare. To adjust the tilt:
- Locate the tilt adjustment knobs or levers on the side of the TV mounting brackets.
- Loosen the knobs or levers to allow the TV to tilt freely.
- Carefully tilt the TV to your desired angle.
- Tighten the knobs or levers to secure the TV in place.
سار سنڀال
- Periodically check all screws and bolts to ensure they remain tight and secure.
- Clean the mount and HDMI cable with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not hang anything from the mount or TV that exceeds the weight capacity.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| TV not level after installation. | انسٽاليشن دوران وال پليٽ برابر نه آهي. | Carefully remove TV, loosen wall plate screws, adjust level using built-in bubble level, and re-tighten. Re-mount TV. |
| TV not securely attached to mount. | Brackets not fully engaged or safety screws not tightened. | Ensure brackets are fully seated on the wall plate. Tighten any safety screws on the bottom of the brackets. |
| No picture/sound via HDMI. | Incorrect input selected on TV, loose cable connection, or faulty source device. | Verify TV input matches the connected HDMI port. Ensure HDMI cable is firmly connected at both ends. Test with another HDMI cable or source device if possible. |
وضاحتون
- برانڊ: Amazon بنياديات
- ماڊل: Heavy-Duty Tilting TV Wall Mount & High-Speed HDMI Cable
- ASIN: B074SVCYZY
- چڙهڻ جو قسم: ٿلهو
- مطابقت رکندڙ ٽي وي سائيز: 37 کان 80 انچ
- وڌ ۾ وڌ وزن جي گنجائش: 120 پائونڊ (54.4 ڪلوگرام)
- جھڪندڙ زاويه: +15 to -3 degrees (18 degrees total)
- HDMI ڪيبل ڊگھائي: 10 فوٽ
- HDMI خاصيتون: ايٿرنيٽ، 3D، 4K وڊيو، آڊيو ريٽرن چينل (ARC) کي سپورٽ ڪري ٿو.
وارنٽي ۽ سپورٽ
وارنٽي جي معلومات ۽ ڪسٽمر سپورٽ لاءِ، مھرباني ڪري سرڪاري Amazon Basics جو حوالو ڏيو. webسائيٽ تي وڃو يا سڌو سنئون Amazon ڪسٽمر سروس سان رابطو ڪريو. وارنٽي دعوائن لاءِ پنهنجي خريداري جي رسيد رکو.
Webسائيٽ: ايميزون بيسڪس اسٽور
