ايسڪو 3 ٽن پرو سيريز لو پروfile فرش ٽرالي جڪ استعمال ڪندڙ دستياب

تعارف

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your ESCO 3 Ton Pro Series Low Profile Floor Trolley Jack. Please read this manual thoroughly before using the jack to ensure proper function and to prevent injury or damage.

حفاظت جي ڄاڻ

خبردار: انھن هدايتن تي عمل ڪرڻ ۾ ناڪاميءَ جي نتيجي ۾ ٿي سگھي ٿو سخت زخمي يا ملڪيت کي نقصان.

• Always use the jack on a hard, level surface.
• Do not exceed the rated capacity of 3 tons (6000 pounds).
• Ensure the vehicle is in park with the parking brake engaged and wheels chocked before lifting.
• Never work under a vehicle supported only by a jack. Always use appropriate jack stands to support the vehicle after lifting.
• هٿن ۽ پيرن کي حرڪت ڪندڙ حصن کان پري رکو.
• ڪنهن به طرح جگ کي تبديل نه ڪريو.
• مناسب ذاتي حفاظتي سامان پائڻ، جهڙوڪ حفاظتي چشما.
• Inspect the jack for damage or leaks before each use. Do not use if damaged.
• گاڏي کي آهستي ۽ ڪنٽرول واري انداز ۾ هيٺ ڪريو.

اجزاء

Familiarize yourself with the main components of your ESCO 3 Ton Pro Series Low Profile Floor Trolley Jack:

• سنڀال: Used for pumping and maneuvering the jack. Features a padded section to protect vehicle finishes.
• هٿ کڻڻ: The main structural component that raises and lowers.
• Saddle/Lifting Pad: The contact point with the vehicle's lifting point.
• Release Pedal/Mechanism: Controls the lowering of the jack.
• ڦيٿي: For easy positioning and movement of the jack.
• Double Piston Pump: Provides quick lifting action.
• Tools and Parts Tray: Integrated tray for convenience.

شڪل 1: ختمview of the ESCO 3 Ton Pro Series Low Profile Floor Trolley Jack in its lowered position.

شڪل 2: بند اپ view of the jack's handle, designed for comfortable grip and featuring a padded section.

شڪل 3: تفصيلي view of the jack's lifting saddle, the primary contact point with the vehicle.

سيٽ اپ ڪريو

1. پيڪنگ کولڻ: Carefully remove the jack and all components from the packaging.
2. اسيمبليء جو انتظام: Insert the handle into the handle socket on the jack. Ensure it is securely seated and locked into place if a locking mechanism is present.
3. Bleeding the Hydraulic System (Initial Use):
   • With the jack fully lowered, open the release valve by twisting the handle counter-clockwise.
   • Pump the handle several times to circulate the hydraulic fluid and remove any trapped air.
   • Close the release valve by twisting the handle clockwise.
   • Test the jack by lifting it to its maximum height and then lowering it. Repeat if necessary until operation is smooth.

آپريٽنگ هدايتون

Lifting a Vehicle:

1. تياري: Park the vehicle on a hard, level surface. Engage the parking brake and place wheel chocks on the wheels that will remain on the ground.
2. Positioning the Jack: Locate the manufacturer-recommended lifting points on the vehicle. Position the jack's saddle directly under the lifting point.
3. کڻڻ: Close the release valve by twisting the handle clockwise until it is tight. Pump the handle to raise the jack. The double piston pump allows for quick lifting.
   

   Figure 4: The jack partially raised, demonstrating the lifting mechanism.

   

   Figure 5: The jack fully extended, showing its maximum lifting height.
4. Using Jack Stands: Once the vehicle is at the desired height, immediately place appropriately rated jack stands under the vehicle's designated support points. Slowly lower the vehicle onto the jack stands using the release mechanism.
5. Removing the Jack: Once the vehicle is securely supported by jack stands, fully lower the jack and remove it from under the vehicle.

Lowering a Vehicle:

1. تياري: Ensure the area around the vehicle is clear.
2. Re-engage Jack: If the vehicle is on jack stands, raise the vehicle slightly with the floor jack so the jack stands can be safely removed.
3. Controlled Lowering: Slowly twist the handle counter-clockwise to open the release valve. The unique "lift & twist" controlled lowering system allows for precise and controlled descent. Do not open the valve too quickly, as this can cause the vehicle to drop rapidly.
   

   Figure 6: Detail of the foot pedal and release mechanism for controlled lowering.

4. Complete Lowering: Continue to lower the vehicle until it is fully on the ground.
5. Remove Jack: Once the vehicle is fully lowered, remove the jack.

سار سنڀال

Regular maintenance ensures the longevity and safe operation of your jack.

• صفائي: Keep the jack clean and free of dirt, grease, and debris. Wipe down the hydraulic ram and other moving parts after each use.
• لوڻ: Periodically lubricate pivot points and wheel axles with light machine oil.
• هائيڊولڪ سيال: Check the hydraulic fluid level regularly. If low, add high-quality hydraulic jack oil. Do not use brake fluid or motor oil. To check/add fluid:
  • Ensure the jack is fully lowered.
  • Locate the oil filler plug (refer to diagram in product manual if available).
  • Remove the plug and check the fluid level. It should be just below the filler hole.
  • Add fluid slowly until the correct level is reached.
  • Replace the filler plug securely.
• اسٽوريج: Store the jack in a clean, dry place with the ram fully retracted to prevent corrosion and extend seal life.
• چڪاس: Before each use, inspect the jack for any signs of damage, wear, or leaks. Pay close attention to welds, wheels, and hydraulic hoses.

شڪل 7: View of the jack's underside, highlighting the double piston pump mechanism.

مشڪلاتون

If you encounter issues not listed here or if solutions do not resolve the problem, please contact ESCO customer support.

وضاحتون

وارنٽي ۽ سپورٽ

This ESCO product is designed for durability and performance. For specific warranty details, including coverage period and terms, please refer to the warranty information provided with your purchase or visit the official ESCO website. For technical assistance, parts, or service inquiries, please contact ESCO customer support.

توهان عام طور تي ٺاهيندڙ جي رابطي جي معلومات ڳولي سگهو ٿا webسائيٽ تي يا پراڊڪٽ پيڪنگنگ تي.