AUTOOL BT360 12V Battery Load Tester Instruction Manual

1. تعارف

The AUTOOL BT360 is a 12V battery load tester designed to analyze the health status of automotive batteries. It performs battery tests, cranking tests, and charging system tests, providing accurate results for various battery types including regular flooded, AGM flat plate, AGM spiral, and Gel batteries. This manual provides detailed instructions for the proper use and maintenance of your BT360 tester.

2. حفاظت جي ڄاڻ

Always observe the following safety precautions when using the AUTOOL BT360 battery tester:

• Wear appropriate eye protection and protective clothing when working near batteries.
• پڪ ڪريو ته گاڏي سٺي هوا واري علائقي ۾ آهي.
• Avoid sparks, flames, and smoking near the battery, as batteries can produce explosive gases.
• Do not touch hot engine parts or moving components.
• Keep the tester and cables away from water, oil, and grease.
• بيٽري جي ڪل کي يقيني بڻايوamps محفوظ طور تي صحيح ٽرمينلز سان ڳنڍيل آهن (ڳاڙهو کان مثبت، ڪارو کان منفي).
• جيڪڏهن بيٽري ايسڊ چمڙي يا اکين سان رابطي ۾ اچي ٿو، ته فوري طور تي گھڻي پاڻي سان ڌوء ۽ طبي مدد حاصل ڪريو.

3. پراڊڪٽ ختمview

3.1 اجزاء

The AUTOOL BT360 package typically includes:

• AUTOOL BT360 Main Unit
• Integrated Testing Cables with Alligator Clamps (مثبت لاءِ ڳاڙهو، منفي لاءِ ڪارو)
• استعمال ڪندڙ جو دستياب (ھي دستاويز)

Image 3.1: AUTOOL BT360 Battery Tester and its included accessories.

3.2 Tester Unit

تصوير 3.2: سامهون view of the AUTOOL BT360 Battery Tester, showing the display and control buttons.

The main unit features an LCD display and four control buttons:

• ESC: فرار/واپس بٽڻ.
• ENT: Enter/Confirm button.
• مٿي/هيٺ تير: Navigation buttons for menu selection.

3.3 اهم خاصيتون

• Performs Battery Test, Cranking Test, and Charging Test.
• Supports multiple battery types: Regular Flooded, AGM Flat Plate, AGM Spiral, and Gel.
• Wide CCA testing range: 100-2400 CCA.
• Multi-language support for user interface.

Image 3.3: The AUTOOL BT360 supports multiple languages for its user interface.

4. وضاحتون

Image 4.1: Physical dimensions of the AUTOOL BT360 Battery Tester.

4.1 Supported Starting Power Supply Standards

Image 4.2: Table showing various starting power supply standards supported by the BT360.

5. سيٽ اپ

5.1 کولڻ

Carefully remove the AUTOOL BT360 tester and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact customer support.

5.2 ٽيسٽر کي ڳنڍڻ

The BT360 is powered directly by the vehicle's 12V battery. Follow these steps to connect the tester:

1. پڪ ڪريو ته گاڏي جي اگنيشن بند آهي ۽ سڀئي لوازمات بند آهن.
2. ڳنڍيو ڳاڙهو مثبت (+) ڪلamp 12V بيٽري جي مثبت (+) ٽرمينل ڏانهن.
3. ڳنڍيو ڪارو ناڪاري (-) ڪلوamp 12V بيٽري جي منفي (-) ٽرمينل ڏانهن.
4. Once connected, the tester will power on automatically.

Image 5.1: The AUTOOL BT360 tester with its integrated testing cables and clamps.

Image 5.2: The BT360 tester connected to a vehicle battery for testing.

6. آپريٽنگ هدايتون

After connecting the tester, the main menu will appear. Use the Up/Down arrow buttons to navigate through options and the ENT button to confirm selections. Use the ESC button to go back to the previous screen.

Image 6.1: Various display screens of the AUTOOL BT360, illustrating menu navigation and test result displays.

6.1 بيٽري ٽيسٽ

This function evaluates the overall health of the battery.

1. مين مينيو مان، چونڊيو بيٽري ٽيسٽ and press ENT.
2. چونڊيو بيٽري جو هنڌ: Choose 'In-Vehicle' if the battery is installed in the car, or 'Out-of-Vehicle' if it's removed. Press ENT.
3. چونڊيو بيٽري جو قسم: Choose the type that matches your battery (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, Gel). Press ENT.
4. چونڊيو معياري ٽيسٽ: Choose the standard specified on your battery (e.g., CCA, JIS, DIN). Press ENT.
5. مقرر بيٽري جي درجه بندي: Input the CCA value (or equivalent rating) as indicated on your battery label. Use arrow buttons to adjust the value and ENT to confirm.
6. The tester will perform the analysis and display results such as State of Health (SOH), State of Charge (SOC), voltage, internal resistance, and a recommendation (e.g., 'Good Battery', 'Charge', 'Replace').

6.2 ڪريڪنگ ٽيسٽ

This test analyzes the vehicle's starting system, including the starter motor.

1. مين مينيو مان، چونڊيو ڪرنگنگ ٽيسٽ and press ENT.
2. Follow the on-screen prompts to start the vehicle. The tester will monitor the battery voltage cranking دوران.
3. Once the test is complete, the display will show cranking voltage, cranking time, and a diagnosis of the starting system's performance.

6.3 چارجنگ ٽيسٽ

This test evaluates the vehicle's charging system, including the alternator and regulator.

1. مين مينيو مان، چونڊيو چارج ٽيسٽ and press ENT.
2. Follow the on-screen prompts to rev the engine to a specified RPM (e.g., 2500 RPM for 5 seconds).
3. ٽيسٽر چارجنگ وول کي ماپيندوtage under load and no-load conditions.
4. The results will indicate the charging system's output, ripple voltage, and overall health (e.g., 'Good', 'Low Output', 'High Output').

7. سار سنڀال

To ensure the longevity and accuracy of your AUTOOL BT360 tester:

• Clean the tester with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• بيٽري کي صحيح رکوampصاف ۽ سنکنرن کان پاڪ آهي.
• ٽيسٽر کي سڪل، ٿڌي جاءِ تي، سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري رکو.
• ڊوائيس کي ڇڏڻ يا ان کي مضبوط اثرن جي تابع ڪرڻ کان پاسو ڪريو.

8. مسئلا حل ڪرڻ

If you encounter issues with your AUTOOL BT360, refer to the following common problems and solutions:

9. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AUTOOL webسائيٽ. وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

ٺاهيندڙ: AUTOOL

تاريخ پهرين دستياب: آڪٽوبر 27، 2017