راجر ٽيڪنالاجي R30/1204 خودڪار سلائيڊنگ گيٽ موٽر استعمال ڪندڙ دستياب

1. تعارف

This manual provides essential instructions for the installation, operation, and maintenance of the ROGER TECHNOLOGY R30/1204 Automatic Sliding Gate Motor. This electromechanical gear motor is designed for sliding gates weighing up to 1200 kg. It features an integrated H70 series control unit, an optical encoder, and a magnetic limit switch for precise and reliable operation. Please read this manual thoroughly before installation and use to ensure safe and correct operation.

2. حفاظتي هدايتون

اهم: Failure to follow these safety instructions may result in serious injury or damage to property.

• Installation must be performed by qualified personnel in compliance with local electrical and safety regulations.
• ڪنهن به انسٽاليشن، سار سنڀال، يا مرمت جي ڪم کان اڳ پڪ ڪريو ته بجلي جي فراهمي بند ٿيل آهي.
• Do not allow children to play with or near the gate motor or its controls.
• Keep hands and loose clothing clear of moving parts of the gate and motor.
• Regularly inspect the gate and motor for signs of wear, damage, or misalignment.
• Do not attempt to repair the motor yourself. Contact qualified service personnel.

3. پراڊڪٽ ختمview

The ROGER TECHNOLOGY R30/1204 is a robust motor designed for automating sliding gates. Its compact design houses a powerful 230V AC motor, an integrated control unit, and advanced safety features.

شڪل 3.1: ٻاهرين view of the R30/1204 motor unit.

Figure 3.2: Internal components, highlighting the motor and gear mechanism.

اهم خاصيتون:

• Electromechanical gear motor for sliding gates.
• Suitable for gates up to 1200 kg.
• Integrated H70 series control unit.
• Optical encoder for precise gate positioning.
• Magnetic limit switches for accurate stop points.
• Irreversible gearbox for secure gate locking.

4. وضاحتون

5. سيٽ اپ ۽ تنصيب

Installation of the R30/1204 motor requires technical expertise and should only be performed by qualified professionals. This section provides a general overview; refer to the detailed installation manual provided with the product for specific wiring diagrams and mounting instructions.

1. سائيٽ جي تياري: Ensure the gate track is clean, level, and free of obstructions. Prepare a stable concrete base for the motor unit.
2. موٽر لڳائڻ: Securely fasten the motor unit to the prepared base using appropriate anchor bolts. Ensure correct alignment with the gate rack.
3. ريڪ لڳائڻ: Attach the gate rack to the sliding gate, ensuring proper meshing with the motor's pinion gear. Maintain a small clearance between the rack and the pinion.
4. برقي ڪنيڪشن: Connect the motor to the 230V AC power supply. Wire the control unit (H70 series) according to the provided diagrams, including connections for safety photocells, remote controls, and other accessories.
5. حد سوئچ جي ترتيب: Install and adjust the magnetic limit switches at the desired open and closed positions of the gate. These switches signal the motor to stop.
6. شروعاتي پروگرامنگ: Power on the system and perform the initial programming steps for the control unit, which typically involves learning the gate's travel limits and setting operational parameters.
7. Safety Device Testing: Thoroughly test all safety devices, such as photocells and emergency stop buttons, to ensure they function correctly.

6. آپريٽنگ هدايتون

Once installed and programmed, the R30/1204 motor provides automated control of your sliding gate.

• ريموٽ ڪنٽرول: Press the designated button on your remote control to open, close, or stop the gate.
• دستي ڇڏڻ: In case of power failure or malfunction, the motor can be manually disengaged. Locate the manual release mechanism (usually a key-operated lever) on the motor unit, unlock it, and manually slide the gate. Remember to re-engage the motor after restoring power or resolving the issue.
• حفاظتي خاصيتون: The optical encoder and safety photocells are designed to detect obstacles. If an obstacle is detected during closing, the gate will reverse. If detected during opening, the gate will stop.

7. سار سنڀال

Regular maintenance ensures the longevity and reliable operation of your gate motor.

• مهيني:
  • Inspect the gate track and wheels for debris and clear any obstructions.
  • Check the gate rack for wear or damage.
  • Verify the proper functioning of safety photocells and limit switches.
• هر ڇهه مهينا:
  • Lubricate moving parts of the gate (wheels, bearings) as recommended by the gate manufacturer.
  • Check all electrical connections for tightness and signs of corrosion.
  • Inspect the motor housing for any damage or water ingress.
• Annual Professional Check: It is recommended to have a qualified technician perform an annual inspection and service of the entire gate automation system.

8. مسئلا حل ڪرڻ

This section addresses common issues you might encounter. For more complex problems, consult a qualified technician.

9. وارنٽي ۽ سپورٽ

Information regarding the specific warranty period and terms for the ROGER TECHNOLOGY R30/1204 motor is typically provided with the product documentation at the time of purchase. Please refer to your purchase receipt or contact your dealer for warranty details.

For technical support, spare parts, or service, please contact your authorized ROGER TECHNOLOGY dealer or installer.

• اسپيئر پارٽس جي دستيابي: معلومات دستياب ناهي.
• سافٽ ويئر اپڊيٽ: notاڻ دستياب نه آهي