Milwaukee M12 FUEL 2598-22 1/2" Hammer Drill & 1/4" Hex Impact Driver Kit User Manual

تعارف

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Milwaukee M12 FUEL 2598-22 2-piece kit. This kit includes the M12 FUEL 1/2" Hammer Drill (2504-20) and the M12 FUEL 1/4" Hex Impact Driver (2553-20), along with batteries, a charger, and a tool bag. Please read this manual thoroughly before initial use.

حفاظت جي ڄاڻ

Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and gloves when operating power tools. Ensure the work area is clear and well-lit. Disconnect the battery pack before making any adjustments, changing accessories, or storing the tool. Refer to the individual tool manuals for specific safety warnings and instructions.

پيڪيج مواد

The Milwaukee M12 FUEL 2598-22 kit typically includes the following items:

• 1x M12 FUEL 1/2" Hammer Drill (Model: 2504-20)
• 1x M12 FUEL 1/4" Hex Impact Driver (Model: 2553-20)
• 1x M12 REDLITHIUM XC4.0 Extended Capacity Battery Pack (48-11-2440)
• 1x M12 REDLITHIUM CP2.0 Compact Battery Pack (48-11-2420)
• 1x M12 Charger (48-59-2401)
• 1x Contractor Bag

سيٽ اپ ڪريو

1. بيٽري لڳائڻ ۽ ختم ڪرڻ

To install a battery pack, align the battery with the base of the tool handle and slide it in until it clicks securely into place. To remove, press the release tabs on the sides of the battery pack and slide it out.

2. بيٽري کي چارج ڪرڻ

Insert the battery pack into the M12 charger. The indicator light on the charger will show the charging status. A solid green light indicates a full charge. Ensure the charger is connected to a compatible power outlet.

3. Attaching/Changing Bits

لاءِ Hammer Drill (2504-20): Twist the chuck counter-clockwise to open the jaws. Insert the drill bit into the chuck and twist clockwise to tighten securely. For the Impact Driver (2553-20): Pull the collar forward, insert the hex bit, and release the collar to lock the bit in place.

آپريٽنگ هدايتون

1. پاور آن/آف

The tools are activated by pressing the trigger. Release the trigger to turn the tool off. The variable speed trigger allows for precise control over the tool's speed.

2. Speed/Torque Selection (Hammer Drill)

The M12 FUEL Hammer Drill (2504-20) features a 2-speed gearbox. Use speed 1 for higher torque applications and speed 2 for higher speed applications. The clutch settings (1-18) allow you to adjust the torque for driving screws, preventing over-tightening or stripping.

3. Mode Selection (Hammer Drill)

The Hammer Drill (2504-20) has three modes: drilling, hammer drilling, and driving. Rotate the collar near the chuck to select the desired mode. The hammer drill mode is suitable for masonry and concrete, while the drill mode is for wood and metal, and the driving mode for fasteners.

4. Drive Control (Impact Driver)

The M12 FUEL Impact Driver (2553-20) features a 4-mode DRIVE CONTROL. This allows the user to shift into different speed and torque settings for versatility. Mode 4 is a self-tapping screw mode, which drives at full RPM until impact, then slows down for better control, preventing over-driving.

5. LED Light Functionality

Both tools are equipped with an LED light that illuminates the work area when the trigger is pressed. The impact driver features three LED lights around the chuck for enhanced visibility.

6. Belt Clip Usage

Both tools include a reversible belt clip for convenient carrying. Attach the tool to your belt or tool pouch for easy access during work.

7. پراڊڪٽ ختمview ۽ خاصيتون

تفصيلي ڄاڻ لاءِ هي وڊيو ڏسوview of the Milwaukee M12 FUEL 2-piece kit, including its features and benefits.

8. Hammer Drill Demonstration

This video demonstrates the performance and features of the Milwaukee M12 Gen 2 Hammer Drill, including its compact size and power.

9. Impact Driver Demonstration

See the Milwaukee M12 Impact Driver in action and understand its capabilities for various fastening tasks.

سار سنڀال

1. عام صفائي

اوزار جي وينٽيليشن جي سوراخن کي صاف ۽ ملبي کان پاڪ رکو. اوزار مان مٽي ۽ چپس صاف ڪرڻ لاءِ نرم برش يا دٻيل هوا استعمال ڪريو. پاڻي يا ڪيميائي صفائي ايجنٽ استعمال نه ڪريو.

2. بيٽري جي سنڀال

Store battery packs in a cool, dry place away from direct sunlight and extreme temperatures. Do not store battery packs in a discharged condition. Charge them regularly, even if not in use, to maintain optimal performance and lifespan.

3. اسٽوريج

When not in use, store the tools, batteries, and charger in the provided contractor bag in a secure, dry location, out of reach of children.

مشڪلاتون

• اوزار شروع نه ٿي رهيو آهي: Ensure the battery pack is fully charged and properly inserted. Check for any obstructions in the chuck or drive mechanism.
• Reduced power or runtime: The battery pack may need charging or replacement. Ensure the correct speed/torque setting is selected for the task.
• گهڻو گرم ٿيڻ: Allow the tool to cool down. Avoid continuous heavy-duty use without breaks. Ensure ventilation slots are not blocked.
• گهڻي وائبريشن/ شور: Check that the bit is properly seated and not damaged. If the issue persists, discontinue use and contact customer support.

وضاحتون

وارنٽي ۽ سپورٽ

Milwaukee Electric Tools offers a warranty for its products. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Milwaukee website. For technical support, service, or replacement parts, contact Milwaukee customer service directly.