Salus RT310 ڊجيٽل وائرڊ ٿرموسٽٽ يوزر مينوئل

1. تعارف

This manual provides instructions for the installation, operation, and maintenance of your Salus RT310 Digital Wired Thermostat. The RT310 is designed to control your heating system, offering a simple and effective way to manage room temperature. Please read this manual thoroughly before installation and use to ensure correct operation and to prevent damage.

2. حفاظت جي ڄاڻ

• برقي تنصيب: Installation should only be carried out by a qualified electrician or competent person. Ensure the main power supply is disconnected before commencing any electrical work.
• جلدtage: The device operates with 230 Volts. Handle with care.
• بيٽري سنڀال: Use only the specified battery type (AA alkaline). Do not mix old and new batteries, or different types of batteries. Dispose of used batteries responsibly.
• ماحول: Do not expose the thermostat to extreme temperatures, humidity, or direct sunlight.
• صفائي: ڊوائيس کي نرم، سڪل ڪپڙي سان صاف ڪريو. رگڙيندڙ صاف ڪندڙ يا محلول استعمال نه ڪريو.

3. پيڪيج مواد

The Salus RT310 package typically includes:

• Salus RT310 Digital Wired Thermostat
• 2 x AA Alkaline بيٽريون
• ماؤنٽنگ اسڪرو ۽ وال پلگ
• استعمال ڪندڙ جو دستياب (ھي دستاويز)

4. پراڊڪٽ ختمview

The Salus RT310 is a digital, non-programmable thermostat designed for straightforward temperature control. It features a clear LCD display and intuitive buttons for adjusting settings.

شڪل 1: سامهون view of the Salus RT310 Thermostat, showing the digital display and control buttons.

اهم خاصيتون:

• Digital LCD display for current and set temperature.
• Simple Up/Down buttons for temperature adjustment.
• Frost protection setting.
• Sleep mode for energy saving.
• Backlight for improved visibility in low light conditions.

Figure 2: Salus RT310 Thermostat with approximate dimensions: 10cm width, 10cm height, 3cm depth.

5. سيٽ اپ

5.1 بيٽري لڳائڻ

1. Carefully remove the front cover of the thermostat.
2. بيٽري جي ڪمري کي ڳولھيو.
3. Insert the 2 x AA alkaline batteries, ensuring correct polarity (+/-).
4. Replace the front cover, ensuring it clicks securely into place.

5.2 چڙهڻ

The Salus RT310 is designed for wall mounting. Choose a suitable location away from direct heat sources, drafts, or direct sunlight, which could affect temperature readings. The ideal height is typically 1.5 meters from the floor.

1. Separate the front panel from the backplate.
2. Position the backplate on the wall and mark the drilling points.
3. سوراخ ڪريو ۽ ڀت پلگ داخل ڪريو.
4. مهيا ڪيل اسڪرو استعمال ڪندي ديوار تي پٺتي پيل کي محفوظ ڪريو.

5.3 Wiring (230V Control)

WARNING: Ensure the main power supply to your heating system is switched OFF at the consumer unit/fuse box before attempting any wiring. Electrical installation should be performed by a qualified professional.

The Salus RT310 is a wired thermostat. It provides both Normally Open (NO) and Normally Closed (NC) contacts for connection to your heating system. For standard 230V control, you will typically use the COM and NO terminals.

Typical Wiring for Replacement (e.g., from an old analogue thermostat):

• Identify the wires from your existing thermostat. Common colors are Brown (Permanent Live), Black (Switched Live), Blue (Neutral), and Green/Yellow (Earth).
• ڳنڍيو Permanent Live (Brown) ڏانهن تار COM (1) terminal on the RT310.
• ڳنڍيو Switched Live (Black) ڏانهن تار نه (3) terminal on the RT310.
• جي غير جانبدار (نيرو) wire is generally not required for the RT310 as it is battery-powered. It should be safely terminated in a terminal strip or insulated with electrical tape.
• جي (رتي (سائو/پيلو) wire should be connected to the earth terminal on the back box or safely terminated.

After wiring, carefully attach the thermostat front panel to the backplate. Restore power to your heating system.

6. آپريشن

6.1 پاور کوليو

Once batteries are installed and wiring is complete, the thermostat will power on and display the current room temperature.

6.2 گرمي پد کي ترتيب ڏيڻ

استعمال ڪريو مٿي (▲) ۽ هيٺ (▼) buttons to set your desired temperature. The display will show the set temperature briefly, then revert to the current room temperature. The thermostat will activate your heating system if the room temperature falls below your set temperature.

6.3 پٺتي

Press any button to activate the display backlight for a few seconds, improving visibility in dark conditions.

6.4 ٿڌي کان بچاءُ

The RT310 includes a frost protection feature. When enabled, the thermostat will automatically activate the heating if the room temperature drops to a pre-set minimum (e.g., 5°C) to prevent pipes from freezing. Refer to the full manufacturer's manual for specific instructions on enabling/disabling this feature.

6.5 سمهڻ جو طريقو

The thermostat may feature a sleep mode to conserve battery life and energy. Consult the manufacturer's detailed instructions for activating and deactivating sleep mode.

7. سار سنڀال

7.1 بيٽري مٽائڻ

When the battery low indicator appears on the display, replace the 2 x AA alkaline batteries promptly to ensure continuous operation. Follow the battery installation steps in Section 5.1.

7.2 صفائي

Wipe the thermostat's exterior with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the device.

8. مسئلا حل ڪرڻ

9. وضاحتون

10. وارنٽي ۽ سپورٽ

For warranty information, technical support, or further assistance, please refer to the official Salus website or contact your local Salus distributor. Keep your proof of purchase for warranty claims.

ٺاهيندڙ: سلوس

ماڊل نمبر: RT310