StarTech.com RKCONS1901

StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

ماڊل: RKCONS1901 | برانڊ: اسٽار ٽيڪ. com

1. تعارف

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. دٻي ۾ ڇا آهي

  • KVM ڪنسول
  • 6 ft [1.8 m] KVM cable
  • M5 ڪيج نٽ
  • م 5 سکرو

3. سيٽ اپ ۽ تنصيب

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 ريڪ لڳائڻ

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

  1. Slide the KVM console into the desired 1U rack space.
  2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
StarTech.com RKCONS1901 KVM Console in closed position, ready for rack mounting.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 ڳنڍيندڙ ڪيبل

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

  1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
  2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
  3. Connect the power cable to the KVM console and a power outlet.
ريڙهه view of the StarTech.com RKCONS1901 KVM Console showing VGA, USB, and power ports.

شڪل 2: پوئتي view of the KVM Console with connection ports.

3.3 Installation Video Reference

For a visual guide on the installation process, refer to the following video:

Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.

4. آپريٽنگ هدايتون

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

  1. To open the console, pull the handle to slide the drawer out of the rack.
  2. Lift the LCD panel to an upright position.
  3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
StarTech.com RKCONS1901 KVM Console in open position, showing the 19-inch LCD monitor, keyboard, and touchpad.

Figure 3: KVM Console in open position, ready for use.

4.2 ڪي بورڊ ۽ ٽچ پيڊ استعمال ڪرڻ

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 او ايس ڊي مينيو نيويگيشن

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.

5. سار سنڀال

To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:

  • صفائي: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
  • وينٽيليشن: Ensure proper airflow around the console. Do not block ventilation openings.
  • ڪيبل جو انتظام: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
  • ماحولياتي حالتون: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6. مسئلا حل ڪرڻ

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

  • ڪابه ڊسپلي: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
  • ڪي بورڊ/ماؤس جواب نه ڏئي رهيو آهي: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
  • Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
  • Incorrect Display Resolution: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. وضاحتون

خاصيتتفصيل
ماڊل نمبرRKCONS1901
برانڊاسٽار ٽيڪ. com
ريڪ جي اوچائي1U
ڊسپلي سائيز19 انچ
ڊسپلي جو قسمActive Matrix TFT LCD
وڌ ۾ وڌ ريڪارڊ1280x1024
ڪي بورڊ99-key full keyboard with numeric keypad
اشارو ڊوائيسٽچ پيڊ
ويڏيو انٽرنيٽVGA
USB سپورٽها
آپريٽنگ جي درجه حرارت0 کان 40 درجا سينٽي گريڊ
ايم بي ايف50,000 ڪلاڪ
پيداوار جي ماپ (LxWxH)21 x 19 x 1.7 انچ
شيءِ جو وزن26.8 پائونڊ

8. وارنٽي ۽ سپورٽ

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو. وارنٽي دعوائن لاءِ پنهنجي خريداري جي رسيد رکو.

لاڳاپيل دستاويز - RKCONS1901

اڳيview StarTech.com 4/8/16 پورٽ 1U ريڪ ماؤنٽ VGA USB KVM سوئچ OSD سان - استعمال ڪندڙ مينوئل
Detailed user manual for the StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch with OSD (models SV431DUSBU, SV831DUSBU, SV1631DUSBU). Learn about installation, operation, OSD features, specifications, and technical support.
اڳيview StarTech.com 8-پورٽ ريڪ ماؤنٽ KVM سوئچ - 4K 60Hz يوزر مينوئل
StarTech.com R8AD122-KVM-SWITCH / R8AH202-KVM-SWITCH 8-پورٽ ريڪ ماؤنٽ KVM سوئچ لاءِ استعمال ڪندڙ دستياب. انسٽاليشن، ڪنسولز ۽ پي سي کي ڳنڍڻ، ۽ 4K 60Hz آپريشن لاءِ هاٽڪي ڪمانڊ استعمال ڪرڻ بابت تفصيلي هدايتون مهيا ڪري ٿو.
اڳيview StarTech.com 4/8/16 پورٽ 1U ريڪ ماؤنٽ USB VGA KVM سوئچ OSD يوزر مينوئل سان
هي يوزر مينوئل StarTech.com 4/8/16 پورٽ 1U ريڪ ماؤنٽ USB VGA KVM سوئچ OSD سان تفصيلي معلومات فراهم ڪري ٿو، جنهن ۾ انسٽاليشن، آپريشن، وضاحتون، ۽ ٽيڪنيڪل سپورٽ شامل آهن.
اڳيview StarTech.com SV441DUSBI / SV841DUSBI 4/8-پورٽ اينهانسڊ ڊجيٽل USB KVM سوئچ اوور IP سان File منتقلي يوزر مينوئل
StarTech.com SV441DUSBI ۽ SV841DUSBI 4/8-پورٽ اينهانسڊ ڊجيٽل USB KVM سوئچ اوور IP لاءِ استعمال ڪندڙ دستياب File منتقلي. انسٽاليشن، ترتيب، آپريشن، ريموٽ مئنيجمينٽ، ۽ خرابي جي حل بابت سکو.
اڳيview StarTech.com SV231DVIUDDM ۽ SV431DVIUDDM: 2 ۽ 4 پورٽ DVI USB KVM سوئچ يوزر مينوئل
StarTech.com SV231DVIUDDM (2-پورٽ) ۽ SV431DVIUDDM (4-پورٽ) DVI USB KVM سوئچز لاءِ DDM سان استعمال ڪندڙ مينوئل. انسٽاليشن، آپريشن، وضاحتون، هاٽ ڪي فنڪشن، ٽيڪنيڪل سپورٽ، ۽ وارنٽي جي معلومات کي ڍڪي ٿو.
اڳيview StarTech.com ADJSHELFHD/ADJSHELFHDV 1U ايڊجسٽبل هاءِ لوڊ فڪسڊ ريڪ ماؤنٽ شيلف - انسٽاليشن ۽ وضاحتون
Learn how to install and use the StarTech.com ADJSHELFHD and ADJSHELFHDV 1U adjustable high load fixed rackmount shelves. This guide covers installation steps, included accessories, and technical specifications for these durable server rack shelves.