تعارف
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your FERM GRM 1023 Pressure Cleaner. Please read these instructions carefully before using the appliance and keep them for future reference.
The FERM GRM 1023 is designed for quick and efficient cleaning of vehicles, machines, bikes, and buildings by removing persistent dirt using clean water and chemical detergents.
حفاظتي هدايتون
خبردار: سڀئي حفاظتي ڊيڄاريندڙ ۽ سڀئي هدايتون پڙهو. ڊيڄاريندڙن ۽ هدايتن تي عمل ڪرڻ ۾ ناڪامي ٿي سگھي ٿي برقي جھٽڪو، باهه، ۽/يا سنگين زخمي.
- Always wear appropriate personal protective equipment, including safety glasses, hearing protection, and protective clothing.
- ڪڏهن به پاڻي جي وهڪري کي ماڻهن، جانورن، بجليءَ جي سامان، يا پاڻ اوزار ڏانهن نه سڌو ڪريو.
- پڪ ڪريو ته بجلي جي فراهمي پراڊڪٽ ليبل تي ڏنل وضاحتن سان ملي ٿي.
- Do not operate the pressure cleaner if the power cord or other important parts are damaged.
- ٻارن ۽ مسافرن کي آپريٽنگ ايريا کان پري رکو.
- Always disconnect the power plug from the socket before cleaning, adjusting, or performing maintenance.
- Use only detergents recommended for pressure cleaners.
- پڪ ڪريو ته سڀئي ڪنيڪشن محفوظ آهن ته جيئن ليڪ کي روڪي سگهجي.
- Do not use the appliance in temperatures below 0°C (32°F) without proper precautions against freezing.
پيداوار ختمview ۽ اجزاء
Familiarize yourself with the main components of your FERM GRM 1023 Pressure Cleaner.
تصوير 1: سامهون view of the FERM GRM 1023 Pressure Cleaner. This image shows the overall design of the unit, including the handle, hose reel, and main body.
تصوير 2: The pressure cleaner with its power cord and high-pressure hose extended. This view highlights the integrated storage for the hose and power cable.
تصوير 3: A display of the various accessories included with the pressure cleaner, such as the spray gun, turbo lance, variable pressure lance, and water inlet adapter.
تصوير 4: بند ڪرڻ view of the spray gun handle, showing the ergonomic design and trigger mechanism.
تصوير 5: Detail of the integrated holder for the spray lance on the side of the pressure cleaner unit, providing convenient storage.
تصوير 6: Close-up of the main power switch, a rotary dial with 'OFF/0' and 'ON/I' positions, located on the front panel of the unit.
شامل اجزاء:
- High Pressure Cleaner Unit
- صابن جي بوتل
- High Pressure Hose (5m)
- Water In-let adapter with filter
- Spray Lance (Variable Pressure)
- ٽربو لانس
- اسپري گن
- صفائي سٿرائي
- دستي (هي دستاويز)
سيٽ اپ ۽ اسيمبلي
- Attach the High-Pressure Hose: Connect one end of the high-pressure hose to the outlet on the pressure cleaner unit and the other end to the spray gun. Ensure connections are tight.
- پاڻي جي فراهمي سان ڳنڍيو: Attach the water inlet adapter with filter to the water inlet on the pressure cleaner. Connect a garden hose (not included) to the inlet adapter and to a water tap. Ensure the water supply is clean and free of debris.
- اسپري گن کي گڏ ڪريو: Insert the desired spray lance (variable pressure or turbo lance) into the spray gun until it clicks into place.
- Detergent Bottle (Optional): If using detergent, fill the detergent bottle and attach it to the designated inlet or lance as per specific accessory instructions.
- پاور ڪنيڪشن: بجلي جي تار کي مناسب گرائونڊ ٿيل بجلي جي آئوٽليٽ ۾ لڳايو.
Before starting, ensure the water tap is fully open and there are no kinks in the hoses.
آپريٽنگ هدايتون
- سسٽم مان هوا صاف ڪريو: Before turning on the power, squeeze the trigger on the spray gun to allow water to flow through the system and expel any trapped air. Continue until a steady stream of water emerges.
- Start the Pressure Cleaner: Turn the ON/OFF switch (refer to Image 6) to the 'ON/I' position. The motor will start.
- صفائي شروع ڪريو: Direct the spray gun nozzle at the surface to be cleaned, maintaining a safe distance. Squeeze the trigger to activate the high-pressure jet.
- Adjust Pressure/Spray Pattern: If using the variable pressure lance, rotate the nozzle to adjust the spray pattern from a concentrated jet to a wider fan spray.
- صابن جو استعمال: If using the detergent bottle, ensure it is correctly attached. The pressure cleaner will draw detergent when operating at low pressure or with the specific detergent nozzle/lance.
- Automatic Shutdown System: The motor will automatically switch off when the trigger is released and restart when the trigger is squeezed again. This feature extends motor life, reduces noise, and saves energy.
- آپريشن بند ڪرڻ: To stop the pressure cleaner, release the trigger and turn the ON/OFF switch to the 'OFF/0' position.
- دٻاءُ گهٽائڻ: After turning off the unit, squeeze the spray gun trigger to release any remaining pressure in the system.
- Disconnect Water and Power: Turn off the water tap and disconnect the garden hose. Unplug the power cord from the electrical outlet.
سار سنڀال ۽ اسٽوريج
صفائي:
- ڪنهن به صفائي يا سار سنڀال ڪرڻ کان اڳ هميشه بجلي جي فراهمي کي ختم ڪريو.
- Clean the exterior of the pressure cleaner with a soft, damp ڪپڙو. سخت ڊٽرجنٽ يا محلول استعمال نه ڪريو.
- رڪاوٽن کي روڪڻ لاءِ پاڻي جي انليٽ فلٽر کي باقاعدي چيڪ ڪريو ۽ صاف ڪريو.
- Use the provided cleaning needle to clear any blockages in the nozzle of the spray lances.
اسٽوريج:
- Drain all water from the pump, hose, and spray gun before storing, especially in freezing conditions. Run the unit for a few seconds with the water supply disconnected and the trigger open to expel remaining water.
- Store the pressure cleaner in a dry, frost-free location.
- Coil the high-pressure hose and power cord neatly. Utilize the integrated storage features on the unit (refer to Image 2 and Image 5).
- Store all accessories in a safe place to prevent damage or loss.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| موٽر شروع نٿو ٿئي. | No power supply; ON/OFF switch in 'OFF' position; Thermal overload activated. | Check power connection and circuit breaker; Turn switch to 'ON'; Allow motor to cool down. |
| No water or low pressure. | Water tap closed; Water inlet filter blocked; Air in pump; Kinked hose; Nozzle blocked. | Open water tap; Clean inlet filter; Purge air from system; Straighten hose; Clean nozzle with cleaning needle. |
| ڌڙڪندڙ دٻاءُ. | Air in pump; Insufficient water supply; Nozzle partially blocked. | Purge air from system; Ensure adequate water flow; Clean nozzle. |
| پاڻيءَ جا وهڪرا. | ڍلا ڪنيڪشن؛ خراب ٿيل او-رنگ. | Tighten all connections; Replace damaged O-rings (contact service center if needed). |
جيڪڏهن انهن حلن جي ڪوشش ڪرڻ کان پوءِ به مسئلو برقرار رهي، مهرباني ڪري ڪسٽمر سپورٽ سان رابطو ڪريو.
ٽيڪنيڪل وضاحتون
- ماڊل نمبر: 2194001GRM1023
- طاقت: 1900 واٽ
- آپريٽنگ جلدtage: 230 وي ، 50 هز
- Maximum Workload Pressure: 140 Bar (14 MPa)
- وڌ ۾ وڌ پاڻي جو وهڪرو: 390 Liters per Hour
- نلي جي ڊگھائي: 5 ميٽر
- پيداوار جي ماپ (LxWxH): 35 x 27 x 47 سينٽي
- شيء جو وزن: 14.2 ڪلو
- ٺاهيندڙ: فرم انٽرنيشنل
وارنٽي ۽ سپورٽ
Your FERM GRM 1023 Pressure Cleaner is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical assistance, spare parts, or warranty claims, please contact your local FERM service center or the retailer where the product was purchased. Keep your proof of purchase for warranty validation.
ٺاهيندڙ رابطو: Ferm International, Lingenstraat 6, 8028 PM Zwolle, Netherlands
درآمد ڪندڙ (ڀارت): FERM INDIA, 85/1, 2nd Floor, 1st main road, New Timberyard Layout, Bangalore, Karnataka





