Utilitech 110-Degree 1-Head Bronze Solar Powered Integrated LED Motion-Activated Flood Light with Timer User Manual

تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of your Utilitech 110-Degree 1-Head Bronze Solar Powered Integrated LED Motion-Activated Flood Light with Timer. This solar-powered floodlight is designed for outdoor security lighting, offering a convenient and energy-efficient solution for illuminating areas such as front yards, backyards, gardens, pathways, and porches. It features an advanced amorphous solar panel for green energy utilization, a dusk-to-dawn sensor to prevent daytime illumination, and a selectable timer for 1 or 3 minutes of light duration.

حفاظت جي ڄاڻ

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• Ensure the solar panel is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal battery charging.
• Do not attempt to disassemble or modify the product. There are no user-serviceable parts inside except for battery replacement.
• Keep the solar panel and light fixture clean from dirt, snow, or debris to maintain charging efficiency and light output.
• This product is designed for outdoor use and is water-resistant. However, avoid submerging it in water.
• When replacing batteries, use only the specified type and rating (two 1000 mAh 18500 lithium phosphate solar rechargeable batteries).
• مقامي ضابطن جي مطابق پراڻين بيٽرين کي ضايع ڪريو.

پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن.

• 1x LED Flood Light Unit with Motion Sensor
• 1x Solar Panel with 20-ft Cord
• ماؤنٽنگ هارڊويئر (اسڪرو، اينڪر)
• 2x 1000 mAh 18500 Lithium Phosphate Solar Rechargeable Batteries (pre-installed or included separately)

Image: The complete Utilitech solar flood light system, showing the LED light unit with motion sensor, the separate solar panel, and the connecting cord.

پيداوار جون خاصيتون

• شمسي توانائي: Easy installation without electrical wiring.
• حرڪت- چالو: 110-degree detection range up to 40 feet.
• مربوط LED: Maintenance-free LED technology with 350 lumens brightness and 5000K cool white light.
• شام کان صبح جو سينسر: Automatically prevents illumination during daylight hours.
• ترتيب ڏيڻ وارو ٽائيم: Selectable light duration of 1 or 3 minutes.
• ترتيب ڏيڻ واري ايلamp سر: Allows for precise light direction.
• طاقت جو ذريعو: Two 1000 mAh 18500 lithium phosphate solar rechargeable batteries (included).
• تنصيب: Suitable for wall and eave mount.
• ڪنڊ ڊگھائي: 20-ft cord connecting the solar panel to the light unit.

سيٽ اپ ۽ تنصيب

Follow these steps for proper installation of your solar flood light.

1. سولر پينل لاءِ جڳھ چونڊيو: Select an outdoor location for the solar panel that receives at least 6-8 hours of direct sunlight daily. Avoid areas shaded by trees, buildings, or other obstructions. The 20-ft cord allows flexibility in placing the solar panel away from the light unit for optimal sun exposure.
   

   تصوير: ويجهو تصوير view of the solar panel with its mounting base and connecting cord.
2. شمسي پينل تي چڙهڻ: Use the provided mounting hardware to securely attach the solar panel to a wall or eave. Ensure the panel is angled to maximize sun exposure.
3. Choose a Location for the Flood Light: Select a desired location for the flood light unit. This can be a wall or eave. Consider the 110-degree motion detection range and the area you wish to illuminate.
   

   Image: The Utilitech flood light unit, showing the LED light head and the motion sensor at the bottom.

4. Mount the Flood Light: Securely attach the flood light unit to the chosen surface using the appropriate mounting hardware.
5. Connect the Solar Panel to the Light Unit: Plug the 20-ft cord from the solar panel into the designated port on the flood light unit. Ensure a secure connection.
   

   Image: An installed Utilitech solar flood light and solar panel on a wall, demonstrating the connection.

6. ايل کي ترتيب ڏيوamp Head and Motion Sensor: Loosen the adjustment screws on the lamp head and motion sensor to position them for optimal coverage. Tighten the screws once adjusted.
7. شروعاتي چارج Allow the solar panel to charge the batteries for at least 24-48 hours in direct sunlight before initial use to ensure full battery capacity.

آپريٽنگ هدايتون

Your Utilitech solar flood light is designed for automatic operation.

• خودڪار آپريشن: The integrated dusk-to-dawn sensor will detect ambient light levels. The flood light will only activate when motion is detected during nighttime hours.
• حرڪت جي چڪاس: The motion sensor has a 110-degree detection angle and can detect movement up to 40 feet away. Position the sensor to cover the desired area.
• ٽائمر سيٽنگ: Locate the timer switch on the flood light unit. You can select between a 1-minute or 3-minute illumination duration after motion is detected.
• Adjustable Detection Sensitivity: The motion sensor sensitivity can be adjusted. Refer to the markings on the sensor for specific settings (if available on your model).

سار سنڀال

باقاعده سار سنڀال توهان جي ٻوڏ جي روشني جي بهترين ڪارڪردگي ۽ ڊگهي عمر کي يقيني بڻائي ٿي.

• صفائي: Periodically clean the solar panel and the LED light lens with a soft, damp cloth to remove dirt, dust, or debris. A clean solar panel ensures efficient charging.
• بيٽري مٽائڻ: The flood light is powered by two 1000 mAh 18500 lithium phosphate solar rechargeable batteries. If the light output diminishes significantly or the light stops working, the batteries may need replacement. Replacement batteries (Lowe's item # 605119) are sold separately.

  بيٽرين کي مٽائڻ لاءِ:

  1. Carefully open the battery compartment on the flood light unit.
  2. پراڻي بيٽرين کي هٽايو ۽ انهن کي صحيح طور تي ختم ڪريو.
  3. Insert new 18500 lithium phosphate solar rechargeable batteries, ensuring correct polarity.
  4. محفوظ طور تي بيٽري جي ڪمري کي بند ڪريو.

• LED ٽيڪنالاجي: The integrated LED technology is maintenance-free and does not require bulb replacement.

مشڪلاتون

If your flood light is not functioning as expected, refer to the following common issues and solutions.

وضاحتون

وارنٽي ۽ سپورٽ

For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service directly. Keep your purchase receipt for warranty claims.

Replacement batteries (Lowe's item # 605119) are available for purchase separately.