تعارف
This manual provides essential information for the proper setup, operation, and maintenance of your Serta Motion Select adjustable bed remote control. This genuine OEM remote is designed for the Serta Motion Select adjustable bed base. While the manufacturer replaced the original black remote with a new gray version as of 2018, all functionality and quality remain identical. Please ensure your old remote's buttons match this replacement exactly for compatibility. Easy syncing instructions are included to get you started quickly.
Image: Serta Motion Select Adjustable Bed Remote Control, showing its layout and buttons.
سيٽ اپ ۽ جوڙيو
To ensure your new Serta Motion Select remote control functions correctly with your adjustable bed base, follow these simple pairing instructions:
- Locate the Pairing Button: On your Serta adjustable bed base, locate the pairing button. This button is typically found on the control box attached to the bed frame, often near the power cord connection.
- Press the Pairing Button: Press and hold the pairing button on the bed base for approximately 3-5 seconds until a light on the control box begins to flash, indicating it is in pairing mode.
- ريموٽ جوڙيو: While the light on the control box is flashing, press and hold any button on your new Serta Motion Select remote control for approximately 3-5 seconds.
- تصديق: The light on the control box should stop flashing and remain solid, or the bed may respond with a slight movement, indicating successful pairing. Your remote is now ready for use.
If pairing is unsuccessful, repeat the steps. Ensure the remote has fresh batteries installed before attempting to pair.
آپريٽنگ هدايتون
Your Serta Motion Select remote control provides intuitive control over your adjustable bed's features. Familiarize yourself with the buttons and their functions:
- مٿي/هيٺ تير: بستري جي مٿو حصي کي مٿي يا هيٺ ترتيب ڏئي ٿو.
- پير مٿي/هيٺ تير: بستري جي پيرن واري حصي کي مٿي يا هيٺ ترتيب ڏئي ٿو.
- فليٽ بٽڻ: Returns both the head and foot sections of the bed to a completely flat position.
- زيرو جي بٽڻ: Activates the 'Zero Gravity' preset position, which elevates the head and foot to a position that may relieve pressure on the back and improve circulation.
- ANTI SNORE Button: Activates a preset position designed to gently raise the head to help reduce snoring.
- MASSAGE Controls (+/-): Adjusts the intensity of the massage function.
- FULL BODY/STOP Buttons: Activates or deactivates the full body massage function.
- روشني وارو بٽڻ: Controls any integrated under-bed lighting or remote backlight.
- Memory Presets (1, 2): Allows you to save and recall your favorite bed positions. To save a position, adjust the bed to your desired setting, then press and hold the desired preset button (1 or 2) until the remote indicates the position is saved (e.g., by flashing a light). To recall, simply press the saved preset button.
بيٽري مٽائڻ
The Serta Motion Select remote control uses a CR2477 Lithium Cell 3V battery. To replace the battery, follow these steps:
- Turn the Remote Over: Place the remote control face down on a soft, clean surface to avoid scratching the buttons.
- بيٽري ڪمپارٽمينٽ کوليو: Locate the battery compartment cover on the back of the remote. There is a small latch or indentation. Use your finger or a small, flat tool to gently pry open the cover.
- پراڻي بيٽري هٽايو: Once the cover is open, you will see the circular CR2477 battery. Gently push the battery out of its holder.
- Insert the New Battery: Place the new CR2477 battery into the compartment with the positive (+) side facing upwards (the side with the numbers/text). Ensure it clicks securely into place.
- ڪمري کي بند ڪريو: Align the battery compartment cover and press it firmly until it snaps shut.
After replacing the battery, you may need to re-pair the remote control with your bed base using the 'Setup and Pairing' instructions above.
وضاحتون
| خاصيت | تفصيل |
|---|---|
| برانڊ | سرتا |
| ماڊل نمبر | Serta Motion Select |
| مطابقت رکندڙ ڊوائيسز | ترتيب ڏيڻ وارو بسترو |
| سپورٽ ٿيل ڊوائيسز جو وڌ ۾ وڌ تعداد | 1 |
| رنگ | Gray (replaces original black version) |
| خاص خصوصيت | ايرگونومي |
| بيٽرين جي ضرورت آهي | 1 x CR2477 Lithium Cell 3V (included) |
مشڪلاتون
- ريموٽ جواب نه ڏيڻ: Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary. Attempt to re-pair the remote with the bed base using the 'Setup and Pairing' instructions.
- Bed Not Moving: Ensure the bed base is properly plugged into a working power outlet. Check all cable connections between the bed base and the control box.
- جزوي ڪارڪردگي: If only certain buttons work, try replacing the battery and re-pairing. If the issue persists, contact Serta customer support.
سار سنڀال
To ensure the longevity and optimal performance of your Serta Motion Select remote control:
- Keep the remote clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Protect the remote from extreme temperatures, moisture, and direct sunlight.
- ريموٽ کي ڇڏڻ يا ان کي مضبوط اثرن جي تابع ڪرڻ کان پاسو ڪريو.
- Replace batteries promptly when the remote's performance declines.
وارنٽي ۽ سپورٽ
For specific warranty information regarding your Serta Motion Select adjustable bed remote control, please refer to the documentation provided with your original bed base or contact Serta customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance or technical support, please visit the official Serta webسائيٽ يا انهن جي ڪسٽمر سروس کاتي سان رابطو ڪريو.
