1. تعارف
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your TEXAS XC 160-108H Ride-On Mower. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.
شڪل 1.1: ختمview of the TEXAS XC 160-108H Ride-On Mower. This image shows the complete ride-on mower from a front-left angle, highlighting its compact design, large wheels, and the cutting deck.
2. حفاظتي هدايتون
Always prioritize safety when operating the ride-on mower. Failure to follow these instructions can result in serious injury or death.
- مشين کي هلائڻ کان پهريان سڀ هدايتون پڙهو ۽ سمجھو.
- ٻارن ۽ پالتو جانورن کي آپريٽنگ ايريا کان پري رکو.
- مناسب ذاتي حفاظتي سامان (PPE) پائڻ، جنهن ۾ اکين جي حفاظت، ٻڌڻ جي حفاظت، ۽ مضبوط بوٽ شامل آهن.
- ڪڏهن به شراب يا منشيات جي اثر هيٺ ڪٽڻ واري مشين کي نه هلايو.
- Inspect the area for debris before mowing.
- Do not operate on excessively steep slopes.
- Turn off the engine and remove the key before performing any maintenance or clearing blockages.
3. سيٽ اپ ۽ اسيمبلي
Your TEXAS XC 160-108H Ride-On Mower may require some assembly upon delivery. Follow these steps carefully.
- پيڪنگ کولڻ: پيڪنگ مان سڀني حصن کي احتياط سان هٽايو. ڪنهن به شپنگ نقصان جي جانچ ڪريو.
- اسٽيئرنگ ويل جي انسٽاليشن: اسٽيئرنگ ويل کي اسٽيئرنگ ڪالم سان ڳنڍيو، پڪ ڪريو ته اهو محفوظ طور تي مضبوط ٿيل آهي.
- سيٽ لڳائڻ: Mount the operator's seat onto the designated frame, securing it with the provided hardware.
- بيٽري ڪنيڪشن: Connect the battery terminals, ensuring correct polarity (red to positive, black to negative).
- پاڻياٺ جي چڪاس: Before first use, check engine oil level and fuel level. Refer to the "Specifications" section for recommended fluid types and capacities.
شڪل 3.1: مٿي کان هيٺ view of the operator's station, showing the steering wheel, seat, and control levers. This image helps in identifying key controls during setup and operation.
4. آپريٽنگ هدايتون
Familiarize yourself with the controls and operating procedures before starting the engine.
4.1. آپريشن کان اڳ جي چيڪ لسٽ
- انجڻ جي تيل جي سطح چيڪ ڪريو.
- Ensure fuel tank is adequately filled with gasoline.
- Inspect tires for proper inflation.
- Verify cutting deck is clear of debris.
- Adjust seat for comfortable operation.
4.2. انجڻ شروع ڪرڻ
- پڪ ڪريو ته پارڪنگ بريڪ لڳل آهي.
- Place the cutting deck engagement lever in the "disengaged" position.
- ignition سوئچ ۾ چاٻي داخل ڪريو.
- Turn the key to the "START" position. The 12V electric start system will engage the engine.
- هڪ ڀيرو انجڻ شروع ٿئي، چاٻي ڇڏ.
4.3. Mowing Operation
- ڪٽڻ جي اوچائي جي ترتيب: Use the 7-fold central adjustment lever to set the desired cutting height between 30 mm and 90 mm.
- رفتار ڪنٽرول: The hydrostatic transmission allows for stepless speed adjustment from 0 to 8.8 km/h using the foot pedal.
- پاسي کان خارج ٿيڻ: The mower features a side discharge chute for efficient grass dispersal. Ensure the chute is clear during operation.
Figure 4.1: Detail of the side discharge chute. This component directs cut grass away from the mower, preventing clumping and ensuring a clean cut.
5. سار سنڀال
Regular maintenance is crucial for the longevity and optimal performance of your ride-on mower.
5.1. انجڻ جي سار سنڀال
- تيل جي تبديلي: Change engine oil (SAE 30) after the first 5 hours of operation, then every 25 hours or annually.
- ايئر فلٽر: ايئر فلٽر کي باقاعدي صاف ڪريو يا تبديل ڪريو، خاص طور تي مٽيءَ واري حالتن ۾.
- اسپارڪ پلگ: اسپارڪ پلگ کي هر سال معائنو ڪريو ۽ صاف ڪريو. جيڪڏهن اهو ڳري ويو آهي ته ان کي تبديل ڪريو.
5.2. Cutting Deck and Blades
- بليڊ تيز ڪرڻ/متبادل: Sharpen or replace blades as needed to ensure a clean cut. Always wear gloves when handling blades.
- ڊيڪ جي صفائي: Clean the underside of the cutting deck after each use to prevent grass buildup.
5.3. عام سار سنڀال
- ٽائر پريشر: باقاعده ٽائر پريشر چيڪ ڪريو.
- لوڻ: Lubricate all moving parts as indicated in the service diagram (not provided, but a general instruction).
- اسٽوريج: Store the mower in a dry, protected area when not in use.
6. مسئلا حل ڪرڻ
هي حصو انهن عام مسئلن جو حل فراهم ڪري ٿو جيڪي توهان کي درپيش اچي سگهن ٿا.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| انجڻ شروع نٿو ٿئي | No fuel; Dead battery; Spark plug issue; Safety switch engaged | Add fuel; Charge/replace battery; Check/replace spark plug; Ensure parking brake is on and deck is disengaged |
| خراب ڪٽڻ جي ڪارڪردگي | Dull blades; Deck clogged; Incorrect cutting height | Sharpen/replace blades; Clean deck; Adjust cutting height |
| ڪٽڻ جي مشين تمام گهڻي واپري ٿي | Bent blade; Loose components | Inspect/replace blade; Tighten all fasteners |
7. وضاحتون
Detailed technical specifications for the TEXAS XC 160-108H Ride-On Mower.
| خاصيت | تفصيل |
|---|---|
| ماڊل | XC 160-108H (90063131) |
| انجڻ جو قسم | Loncin 4-Stroke |
| بي گھر ٿيڻ | 452 cm³ |
| پاور آئوٽ | 9.2 ڪلوواٽ / 12.5 پي ايس |
| ٻارڻ جو قسم | گيسولين |
| ٻارڻ جي ٽانڪي جو مقدار | 7.5 ليٽر |
| انجڻ جي تيل جو قسم | ايس اي 30 |
| انجڻ جي تيل جو مقدار | 1.2 ليٽر |
| ڪٽڻ جي ويڪر | 108 سينٽي |
| ڪٽڻ جي اوچائي جي ترتيب | 7-fold, 30 - 90 mm |
| شروع ڪندڙ | 12V Electric Start |
| ٽرانسميشن | Hydrostatic (American Hydro-Gear) |
| رفتار جي حد | 0 - 8.8 ڪلوميٽر في ڪلاڪ |
| ڦرندڙ دائرو | 45 سينٽي |
| Tire Size (Front/Rear) | Front: 15", Rear: 18" (Pneumatic) |
| هائوسنگ مواد | اسٽيل |
| آواز جي طاقت جي سطح | 100 ڊي بي (اي) |
| طول و عرض (L x W x H) | 173 سينٽي x 132 سينٽي x 105 سينٽي ميٽر |
| وزن | 170 ڪلو |
8. وارنٽي ۽ سپورٽ
For warranty information and customer support, please refer to the documentation provided with your purchase or contact Texas customer service directly. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
For further assistance, visit the official Texas webسائيٽ تي وڃو يا انهن جي مجاز سروس سينٽرن سان رابطو ڪريو.
