تعارف
This manual provides comprehensive instructions for the Master Lock 1530DCM Standard Dial Combination Padlock. Please read this guide carefully to ensure proper setup, operation, and maintenance of your padlock. This padlock features a 1-7/8 inch (48mm) wide metal body, a hardened steel shackle, and a 3-digit combination for keyless security.
Image: Three Master Lock 1530DCM combination padlocks, showcasing the assorted colors (blue, red, and purple) and the standard dial mechanism. Each padlock has a hardened steel shackle and a numbered dial for setting the combination.
سيٽ اپ ڪريو
The Master Lock 1530DCM padlock comes with a pre-set, non-resettable 3-digit combination. This combination is typically found on a sticker on the back of the lock or on the packaging. Keep this combination in a safe and memorable place.
Identifying Your Combination
- Locate the Combination: Check the packaging or a sticker on the back of your padlock for the factory-set 3-digit combination.
- پنهنجو ميلاپ رڪارڊ ڪريو: Write down your combination and store it securely. Do not store it inside the locker or item you are securing.
آپريٽنگ هدايتون
Opening the Padlock
- ڊائل صاف ڪريو: Turn the dial three or more full turns to the right (clockwise) to clear any previous numbers.
- پهريون نمبر: Stop at the first number of your combination.
- ٻيو نمبر: Turn the dial to the left (counter-clockwise), passing the first number once, and then stop at the second number of your combination on the second pass.
- ٽيون نمبر: Turn the dial to the right (clockwise) and stop directly at the third number of your combination.
- کليل ٿلهو: Pull up on the shackle to open the lock. If it does not open, repeat the steps, ensuring precision with each number.
Closing the Padlock
- Insert Shackle: زنجيرن کي مضبوطيءَ سان لاڪ باڊي ۾ دٻايو جيستائين اهو جاءِ تي ڪلڪ نه ڪري.
- Scramble Dial: Turn the dial several times to scramble the numbers. This secures the lock and prevents unauthorized access.
سار سنڀال
Regular maintenance helps ensure the longevity and smooth operation of your Master Lock 1530DCM padlock.
- صفائي: Wipe the lock body and shackle with a soft, dry cloth to remove dust and grime. Avoid harsh chemicals or abrasive cleaners.
- لوڻ: If the dial becomes stiff or difficult to turn, apply a small amount of graphite lubricant or a silicone-based spray lubricant into the shackle holes and around the dial mechanism. Do not use oil-based lubricants as they can attract dirt.
- اسٽوريج: Store the padlock in a dry environment when not in use to prevent rust and corrosion, especially if exposed to moisture.
مشڪلاتون
Lock Will Not Open
- Incorrect Combination: Double-check that you are using the correct 3-digit combination. Refer to where you recorded it.
- Dialing Procedure: Ensure you are following the opening procedure precisely:
- Turn right three full turns, stop at the first number.
- Turn left past the first number once, stop at the second number on the second pass.
- Turn right, stop directly at the third number.
- Over-Dialing: If you turn past a number, you must restart the entire opening sequence from the beginning.
- Stuck Shackle: Apply slight upward pressure on the shackle while entering the last number, then pull firmly.
Dial is Stiff or Hard to Turn
- لوڻ: Apply a small amount of graphite or silicone-based lubricant as described in the Maintenance section.
- ملبو: Check for any foreign objects or debris obstructing the dial mechanism.
وضاحتون
| ماڊل نمبر | 1530 ڊي سي ايم |
| تالا جو قسم | Standard Dial Combination Padlock |
| جسم جي ويڪر | 1-7/8 انچ (48mm) |
| Shackle Diameter | 9/32 انچ (7 ملي ميٽر) |
| Shackle Length | 3/4 انچ (19 ملي ميٽر) |
| مواد | مصر جو اسٽيل، ايلومينيم، ڌاتو |
| خاص خصوصيت | Keyless, Anti-shim technology |
| ختم ڪر | اينوڊائيزڊ ختم |
وارنٽي ڄاڻ
The Master Lock 1530DCM Standard Dial Combination Padlock is backed by a محدود لائفائم وارنٽي. This warranty covers defects in material and workmanship under normal use. For specific details regarding warranty claims and coverage, please refer to the official Master Lock webسائيٽ يا انهن جي گراهڪ سپورٽ سان رابطو ڪريو.
ڪسٽمر سپورٽ
For further assistance, questions, or to report an issue with your Master Lock 1530DCM padlock, please contact Master Lock customer support. You can typically find contact information, including phone numbers and online support portals, on the official Master Lock webسائيٽ.
It is recommended to have your product model number (1530DCM) available when contacting support.
