Rolair JC20 پورٽبل ايئر ڪمپريسر صارف دستياب

1. تعارف

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Rolair JC20 Hand Carry Portable Air Compressor. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

The Rolair JC20 is an oilless, 2 horsepower electric air compressor designed for light-duty framing and roofing work. It features a two-cylinder pump, a low-amp draw motor, a heavy-duty roll-cage, integrated cord wrap, upward-facing gauges, and a quarter-turn drain valve, all contributing to its quiet operation at only 70 dB.

2. حفاظت جي ڄاڻ

بجليءَ جي جھٽڪي، باهه، يا سنگين زخم جي خطري کي گهٽائڻ لاءِ هميشه هيٺ ڏنل حفاظتي احتياطن تي عمل ڪريو.

• سڀئي هدايتون پڙهو: Familiarize yourself with the compressor's controls and proper operation.
• برقي حفاظت: Ensure the power source matches the compressor's voltage (115 Volts AC). Do not operate in wet conditions. Always use a grounded outlet.
• ذاتي حفاظتي سامان: Wear safety glasses or goggles when operating the compressor or using air tools. Hearing protection is recommended, especially during prolonged use.
• آپريٽنگ ماحول: Operate the compressor in a well-ventilated area. Keep children and bystanders away. Do not operate near flammable liquids or gases.
• دٻاءُ جي حفاظت: Never exceed the maximum operating pressure of any air tool or accessory. Do not attempt to modify the pressure relief valve.
• سار سنڀال: ڪنهن به سار سنڀال يا مرمت ڪرڻ کان اڳ بجلي بند ڪريو.
• گرم سطحون: The compressor pump and motor can become hot during operation. Avoid contact with hot surfaces.

3. اهم خاصيتون ۽ جزا

The Rolair JC20 is engineered with several features for performance and durability:

• سپر خاموش آپريشن: اڪيلو-ايسtage oilless design with only 70 dB noise level.
• Durable Pump: Cast aluminum cylinder with stainless steel reed valves.
• موثر موٽر: 1700 RPM low-amp draw motor with automatic overload protection.
• Protective Roll-Cage: Heavy-duty design to protect the pump and motor.
• Integrated Cord Wrap: آسان اسٽوريج ۽ ٽرانسپورٽ لاءِ.
• Upward-Facing Gauges: For easy monitoring of tank and regulated pressure.
• Quarter-Turn Drain Valve: For easy moisture drainage from the tank.

شڪل 3.1: سامهون view of the Rolair JC20 Air Compressor, showing the green tank, motor, gauges, and protective roll-cage.

شڪل 3.2: زاويه view highlighting the two-cylinder pump heads and motor assembly.

شڪل 3.3: پاسي view of the Rolair JC20, illustrating the compact design and component layout within the roll-cage.

4. سيٽ اپ

1. پيڪنگ کولڻ: Carefully remove the compressor from its packaging. Inspect for any shipping damage. Report any damage to your dealer immediately.
2. لڳائڻ: Place the compressor on a firm, level surface in a clean, dry, and well-ventilated area. Ensure adequate clearance around the unit for air circulation.
3. برقي ڪنيڪشن:
   • تصديق ڪريو ته پاور سپلائي voltage matches the compressor's requirements (115 Volts AC).
   • Plug the power cord into a grounded electrical outlet. Avoid using extension cords if possible. If an extension cord is necessary, use a heavy-duty, grounded cord of appropriate gauge for the distance.
4. Initial Drain: Before first use, ensure the quarter-turn drain valve at the bottom of the tank is closed.

5. آپريٽنگ هدايتون

1. پاور آن: Locate the ON/OFF switch (typically a rocker switch or pressure switch) and turn the compressor ON. The compressor will begin to build pressure.
2. دٻاءُ جو وڌڻ: Allow the compressor to run until it reaches its maximum pressure and the motor automatically shuts off. This indicates the tank is fully charged.
3. هوائي اوزار ڳنڍڻ:
   • Attach your air hose to the quick-connect coupler on the compressor.
   • Connect your air tool to the other end of the hose.
4. آئوٽ پُٽ پريشر کي ترتيب ڏيڻ: Use the pressure regulator knob to set the desired output pressure for your air tool. Monitor the regulated pressure gauge.
5. آپريشن: Begin using your air tool. The compressor will cycle on and off automatically to maintain tank pressure as air is consumed.
6. بجلي بند: When finished, turn the compressor OFF using the ON/OFF switch.
7. دٻاءُ گهٽائڻ: Disconnect the air hose and tool. Allow any remaining air in the tank to escape through the drain valve or by briefly opening the regulator.

6. سار سنڀال

Regular maintenance ensures the longevity and optimal performance of your Rolair JC20 compressor. Always disconnect the power before performing maintenance.

• Daily: Drain Moisture from Tank:
  • With the compressor off and tank depressurized, open the quarter-turn drain valve located at the bottom of the tank.
  • Allow all accumulated moisture to drain completely.
  • Close the drain valve securely.
• Weekly/Monthly: Inspect Air Filter:
  • Check the air intake filter for dirt and debris.
  • Clean or replace the filter as necessary. A clogged filter can reduce compressor performance and lifespan.
• Periodically: Inspect for Leaks:
  • With the compressor pressurized, apply a soapy water solution to all fittings and connections.
  • Bubbles indicate a leak. Tighten connections or replace seals as needed.
• اسٽوريج: Store the compressor in a clean, dry location. Ensure the tank is drained of moisture before storage.

7. مسئلا حل ڪرڻ

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For warranty information, please refer to the documentation included with your purchase or visit the official Rolair website. For technical support, parts, or service inquiries, please contact Rolair customer service or your authorized dealer.

ٺاهيندڙ: روليئر

رابطي جي ڄاڻ: Please refer to the contact details provided on the Rolair official website or your purchase receipt for the most current support options.