Danfoss RT101 Thermostat User Manual

1. تعارف

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Danfoss RT101 Thermostat. Please read this manual thoroughly before installing or operating the device to ensure proper function and to prevent potential hazards.

The Danfoss RT101 is a robust, industrial-grade thermostat designed for precise temperature control within a range of 25-90°C, featuring an automatic reset function and a Single Pole Double Throw (SPDT) switch. It includes a 2000mm capillary tube for remote temperature sensing.

2. حفاظت جي ڄاڻ

اهم: Always observe local regulations and safety standards when installing and operating electrical equipment. Failure to do so may result in injury, damage to equipment, or fire.

• Ensure the power supply is disconnected before performing any installation, wiring, or maintenance.
• Installation and electrical connections must be performed by qualified personnel only.
• تصديق ڪريو ته سپلائي voltage matches the thermostat's specifications (230 Volts).
• Do not expose the thermostat or capillary tube to excessive mechanical stress or sharp bends.
• Protect the sensor bulb from physical damage.
• This device is not intended for use in explosive atmospheres.

3. پراڊڪٽ ختمview

The Danfoss RT101 Thermostat is a reliable electromechanical temperature switch. Its primary function is to maintain a desired temperature by controlling an external heating or cooling system through its SPDT contact configuration.

Image: Danfoss RT101 Thermostat. The image displays the main thermostat unit, a grey rectangular enclosure with the Danfoss logo and 'MADE IN POLAND' inscription. A white circular gland is visible on the left side, from which a coiled metallic capillary tube extends. The tube terminates in a silver, tapered sensor bulb, designed for immersion or surface contact to measure temperature.

اهم خاصيتون شامل آهن:

• درجه حرارت جي حد: 25-90 ° C
• Switch Type: SPDT (Single Pole Double Throw)
• Reset Type: Automatic Reset
• Capillary Tube Length: 2000mm
• Robust Copper construction for the capillary tube and sensor.

4. سيٽ اپ ۽ تنصيب

4.1 کولڻ

• Carefully remove the thermostat from its packaging.
• ٽرانزٽ دوران نقصان جي ڪنهن به نشاني لاءِ يونٽ جو معائنو ڪريو. جيڪڏهن خراب ٿي وڃي ته انسٽال نه ڪريو.
• Ensure all components are present: thermostat unit, capillary tube with sensor bulb.

4.2 چڙهڻ

• Select a suitable mounting location that is free from excessive vibration, direct sunlight, and extreme temperatures outside the operating range of the unit itself.
• Mount the thermostat securely using appropriate fasteners. Ensure the unit is level.
• Position the capillary tube and sensor bulb in the area where temperature is to be measured. The 2000mm length allows for flexible placement.
• Avoid sharp bends or kinks in the capillary tube, as this can affect accuracy or damage the tube. The minimum bending radius should be observed.

4.3 برقي ڪنيڪشن

خبردار: ڪنهن به اليڪٽرڪ ڪنيڪشن ٺاهڻ کان پهريان بجلي کي ختم ڪريو.

• The Danfoss RT101 operates at 230 Volts. Confirm your power supply matches this requirement.
• Open the terminal cover on the thermostat unit.
• Connect the power supply and controlled load to the appropriate terminals as indicated by the wiring diagram inside the unit cover. The RT101 features an SPDT switch, providing both normally open (NO) and normally closed (NC) contacts relative to the common terminal.
• پڪ ڪريو ته سڀئي ڪنيڪشن مضبوط ۽ محفوظ آهن.
• Close the terminal cover securely after wiring.

5. آپريٽنگ هدايتون

5.1 درجه حرارت مقرر ڪرڻ

• The thermostat features a button control mechanism for setting the desired temperature.
• Refer to the markings on the thermostat for temperature adjustment. Typically, a dial or button allows you to select a setpoint within the 25-90°C range.
• Turn the adjustment mechanism to the desired temperature setpoint.
• The thermostat will activate or deactivate the connected load when the sensed temperature crosses this setpoint, considering the differential (hysteresis).

5.2 Auto Reset Function

The Danfoss RT101 is equipped with an automatic reset function. This means that once the temperature returns to within the acceptable operating range (after exceeding a set limit and triggering the switch), the thermostat will automatically reset its contacts without manual intervention. This is crucial for continuous process control where manual resetting is impractical or undesirable.

6. سار سنڀال

• باقاعده چڪاس: Periodically inspect the thermostat, capillary tube, and sensor bulb for any signs of physical damage, corrosion, or loose connections.
• صفائي: Keep the thermostat housing clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
• سينسر لڳائڻ: Ensure the sensor bulb remains correctly positioned and has good thermal contact with the medium or surface it is monitoring.
• برقي ڪنيڪشن: Annually check electrical connections for tightness.
• No user-serviceable parts inside. For internal repairs, contact qualified service personnel.

7. مسئلا حل ڪرڻ

8. ٽيڪنيڪل وضاحتون

9. وارنٽي ۽ سپورٽ

Danfoss products are manufactured to high-quality standards and are covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and purchase date. Please retain your proof of purchase.

For technical support, warranty claims, or service inquiries, please contact your authorized Danfoss distributor or visit the official Danfoss website for contact information in your region. When contacting support, please have your product model (RT101) and serial number (if applicable) ready.

آن لائين وسيلا: For additional documentation, FAQs, and product updates, please visit the official Danfoss webسائيٽ.