SIMREX A240 A241 A230 A231 A120 A130 Battery Instruction Manual

1. تعارف

This instruction manual provides essential information for the safe and effective use, charging, and maintenance of your SIMREX A240, A241, A230, A231, A120, A130 series rechargeable batteries. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. پراڊڪٽ ختمview

The SIMREX batteries are designed as replacement or spare power sources for various SIMREX remote-controlled devices, including specific drone and RC car models. These are Ni-Cd (Nickel-Cadmium) rechargeable batteries, typically rated at 4.8V and 700mAh, offering reliable power for your compatible devices.

This image displays two blue SIMREX Ni-Cd 4.8V 700mAh rechargeable battery packs. Each battery pack has a black and red wire connector. A blurred image of an RC car chassis is visible in the background, indicating the intended use of these batteries.

3. حفاظت جي ڄاڻ

Always adhere to the following safety guidelines when handling and using rechargeable batteries:

• بيٽري کي ڌار نه ڪريو، پنڪچر نه ڪريو، يا تبديل نه ڪريو.
• Do not expose batteries to extreme temperatures (hot or cold), direct sunlight, or fire.
• بيٽري ٽرمينلز کي شارٽ سرڪٽ ڪرڻ کان پاسو ڪريو.
• Keep batteries away from water and moisture.
• بيٽرين کي بغير چارج نه ڪريو.
• Use only the charger specifically designed for these batteries.
• جيڪڏهن بيٽري ۾ نقصان، سوجن، يا ليڪيج جا نشان نظر اچن ته فوري طور تي استعمال بند ڪريو ۽ ان کي صحيح طريقي سان ضايع ڪريو.
• ٻارن ۽ پالتو جانورن جي پهچ کان پري رکو.

4. سيٽ اپ ۽ شروعاتي چارجنگ

4.1 شروعاتي چارج

Before first use, fully charge the batteries. Connect the battery to its dedicated charger. The charging indicator on the charger will typically show red during charging and turn green when fully charged. Charging time may vary depending on the charger and battery's initial charge level.

4.2 تنصيب

Refer to your device's instruction manual for specific battery installation procedures. Generally, ensure the device is powered off before installing or replacing batteries. Align the battery connector with the device's port and gently push until it clicks into place. Do not force the connection.

This image shows a white SIMREX drone with propeller guards, a black remote controller with a smartphone holder, and two black battery packs. This illustrates the typical components of a SIMREX drone kit, highlighting where these replacement batteries would be used.

5. آپريٽنگ ھدايتون

5.1 استعمال

Once installed, power on your device. Monitor the device's battery indicator, if available, to track remaining power. Avoid completely draining the battery, as this can reduce its lifespan. It is recommended to stop operation and recharge when the device indicates low battery.

5.2 ري چارج ڪرڻ

To recharge, remove the battery from the device and connect it to the appropriate charger. Ensure the charger is connected to a suitable power source. Always supervise batteries during charging. Disconnect the charger once the battery is fully charged.

6. اسٽوريج ۽ سار سنڀال

6.1 اسٽوريج

Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures. For long-term storage, it is advisable to store Ni-Cd batteries fully discharged to prevent memory effect, though modern Ni-Cd batteries are less prone to this. If storing for extended periods, periodically check the battery voltage.

6.2 صفائي

Keep battery terminals clean and free from dust or debris. Use a dry, soft cloth to wipe the battery if necessary. Do not use liquids or abrasive cleaners.

7. مسئلا حل ڪرڻ

• بيٽري نه ڀريندي: Ensure the charger is properly connected to both the battery and a working power outlet. Check for any visible damage to the battery or charger.
• مختصر آپريٽنگ وقت: The battery may not be fully charged, or its capacity may have degraded over time. Ensure proper charging cycles. If the issue persists, consider replacing the battery.
• ڊوائيس تي طاقت نه آهي: Verify the battery is correctly installed and fully charged. Check the device's battery compartment for any obstructions or corrosion.
• Battery overheating during charge/discharge: Discontinue use immediately. Overheating can indicate an internal fault. Dispose of the battery safely.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the official SIMREX webسائيٽ تي وڃو يا پنهنجي پرچون ڪندڙ سان رابطو ڪريو. خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.