1. تعارف
This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of the Subzero SZ-7569T Touch Sensitive Temperature Controller. Please read this manual thoroughly before using the device to ensure proper function and safety. Keep this manual for future reference.
2. پراڊڪٽ ختمview
The Subzero SZ-7569T is a precise, touch-sensitive temperature controller designed for various industrial and scientific applications. It features a clear digital display and intuitive touch controls for easy temperature management.
Figure 1: Subzero SZ-7569T Front Panel
The image displays the front panel of the Subzero SZ-7569T temperature controller. It features a black casing with a bright red digital LED display showing '28°C'. To the left, the 'sub-zero' brand name is visible. On the right, there are touch-sensitive buttons for 'Up' (arrow), 'Power' (circle with line), 'PRG' (program) with a 'Down' arrow, and 'SET' (set). A snowflake icon is also visible next to the temperature reading, indicating a cooling function.
3. وضاحتون
| خاصيت | تفصيل |
|---|---|
| برانڊ | Sub Zero |
| ماڊل | ايس زي-7569 ٽي |
| ٺاهيندڙ | PVR Control |
| اصل جو ملڪ | انڊيا |
| رنگ | ڪارو |
| شيءِ جو وزن | 210 جي |
| پيداوار جي ماپ (LxWxH) | 10 x 6 x 4 سينٽي |
| جلدtage | 220 وولٽ (AC) |
| ڊسپلي جو قسم | ٽچ اسڪرين |
4. تنصيب
Proper installation is crucial for the accurate and safe operation of the temperature controller. It is recommended that installation be performed by a qualified technician.
- پاور ڪنيڪشن: Ensure all power to the installation area is disconnected before beginning any wiring.
- چڙهڻ: Mount the controller in a secure, dry location away from direct heat sources, excessive vibration, or corrosive environments. Ensure adequate ventilation.
- وائرنگ: Connect the power supply, temperature sensor, and controlled device (e.g., heater, cooler) to the appropriate terminals on the controller. Refer to the wiring diagram provided with the product packaging for specific connections. Ensure all connections are secure and correctly polarized.
- سينسر لڳائڻ: Position the temperature sensor in the area where temperature control is required, ensuring it accurately reflects the desired measurement point and is not influenced by external factors.
- پاور ڪنيڪشن: Once all wiring is complete and verified, restore power to the system.
Warning: Incorrect wiring can lead to device malfunction, damage, or electrical hazards. Always consult the detailed wiring diagram.
5. شروعاتي سيٽ اپ
After installation, perform the following steps for initial setup:
- پاور آن: کي دٻايو 🏻 (Power) button to turn on the device. The display will illuminate.
- Check Sensor Reading: Verify that the display shows a plausible temperature reading. If an error code appears, refer to the Troubleshooting section.
- رسائي سيٽنگون: کي دٻايو سيٽ button to enter the temperature setting mode.
- Adjust Setpoint: استعمال ڪريو ⌃ (مٿي) ۽ ⌄ (Down) buttons to adjust the desired temperature setpoint.
- Confirm Setpoint: دٻايو سيٽ again to confirm the new setpoint and exit the setting mode.
- Program Mode (PRG): For advanced settings such as hysteresis, calibration, or alarm limits, press the پي آر جي button. Navigate through parameters using the Up/Down arrows and confirm changes with سيٽ. Consult the full programming guide for detailed parameter descriptions.
6. آپريشن
The Subzero SZ-7569T operates automatically once the setpoint and parameters are configured. The display shows the current measured temperature.
- درجه حرارت ڊسپلي: The large digital display continuously shows the current temperature measured by the sensor.
- Cooling/Heating Indicator: A snowflake icon (❅) or similar indicator will illuminate when the cooling or heating output is active, depending on the configured mode.
- Adjusting Setpoint During Operation: مختصر طور تي دٻايو سيٽ، پوء استعمال ڪريو ⌃ (مٿي) يا ⌄ (Down) to change the setpoint. Press سيٽ ٻيهر بچائڻ لاءِ.
- پاور آن / آف: کي دٻايو ۽ رکو 🏻 (Power) button for a few seconds to turn the device off or on.
7. سار سنڀال
Regular maintenance ensures the longevity and accuracy of your Subzero SZ-7569T temperature controller.
- صفائي: ڊسپلي صاف ڪريو ۽ casing نرم سان، damp cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the touch panel or internal components.
- سينسر جي چڪاس: Periodically check the temperature sensor for any signs of damage or corrosion. Ensure it is securely in place.
- ڪنيڪشن: Occasionally inspect wiring connections to ensure they remain tight and free from corrosion.
- حساب ڪتاب جي چڪاس: If accuracy is critical, periodically verify the controller's readings against a calibrated reference thermometer. Recalibrate if necessary, following the instructions in the programming guide.
Caution: Always disconnect power before performing any maintenance that involves opening the device or accessing internal wiring.
8. مسئلا حل ڪرڻ
This section addresses common issues you might encounter with the Subzero SZ-7569T.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ڊسپلي خالي آهي | No power supply; Loose wiring; Device malfunction. | Check power connection; Verify wiring; Contact support if power is present and wiring is correct. |
| غلط درجه حرارت پڙهڻ | Faulty sensor; Sensor incorrectly placed; Calibration error. | Check sensor connection and placement; Replace sensor if damaged; Perform calibration. |
| Controller not switching output | Setpoint not reached; Hysteresis setting too wide; Wiring issue; Device malfunction. | Verify setpoint and current temperature; Adjust hysteresis; Check output wiring; Contact support. |
| بٽڻ غير جوابي | Temporary software glitch; Physical damage to touch panel. | Power cycle the device; If issue persists, contact support. |
If you encounter an issue not listed here or if the suggested solutions do not resolve the problem, please contact customer support.
9. وارنٽي ۽ سپورٽ
The Subzero SZ-7569T Touch Sensitive Temperature Controller is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms and conditions, including the warranty period.
For technical support, service, or warranty claims, please contact PVR Control customer service. Ensure you have your product model number (SZ-7569T) and purchase details available when contacting support.
ٺاهيندڙ: PVR Control
ماڊل: ايس زي-7569 ٽي
