iBeam by Metra TEDGH Ram Tailgate Handle Camera User Manual

تعارف

This manual provides comprehensive instructions for the installation, operation, and maintenance of your iBeam by Metra TEDGH Ram Tailgate Handle Camera. This factory replacement tailgate handle camera is designed to enhance visibility behind your vehicle, offering a clear view for safer maneuvering and parking.

پيداوار ختمview

The iBeam TEDGH camera integrates seamlessly into your Ram truck's tailgate handle, providing a discreet and factory-like appearance. It features advanced imaging capabilities for both day and night use.

• اعليٰ معيار جي تصوير: Equipped with a 1/3 inch CMOS camera sensor for sharp and clear video output.
• ويڪرو Viewزاويه: 150 درجا پيش ڪري ٿو viewing angle to capture a broad perspective behind the vehicle.
• رات جو خواب: Features 0.5 LUX night vision for improved visibility in low-light conditions.
• Defeatable Parking Lines: Includes on-screen parking guidelines that can be enabled or disabled as per user preference.
• Extended Harness: Comes with a 26-foot harness for flexible connection to an aftermarket radio or display (not included).

دٻي ۾ ڇا آهي

Upon opening the product packaging, please ensure all the following components are present:

• iBeam TEDGH Ram Tailgate Handle Camera unit
• 26-foot extension cable harness
• استعمال ڪندڙ جو دستياب (ھي دستاويز)

سيٽ اپ ۽ تنصيب

The iBeam TEDGH camera is designed for surface mount installation as a factory replacement tailgate handle. Professional installation is recommended.

حفاظتي احتياط

• بجلي جي شارٽ کان بچڻ لاءِ انسٽاليشن شروع ڪرڻ کان اڳ گاڏي جي بيٽري کي ڊسڪنيڪٽ ڪريو.
• Ensure all wiring is routed away from moving parts, heat sources, and sharp edges.
• پڪ ڪريو ته سڀئي ڪنيڪشن محفوظ آهن ۽ صحيح طور تي موصل آهن.
• This product is intended for use with a 12-volt DC power supply.

انسٽاليشن جا مرحلا (عام گائيڊ)

1. Remove Existing Tailgate Handle: Carefully remove the original tailgate handle from your Ram truck. Refer to your vehicle's service manual for specific instructions.
2. Install New Tailgate Handle Camera: Mount the iBeam TEDGH camera unit into the tailgate opening, ensuring it is securely fastened.
3. رستي جي وائرنگ: Route the 26-foot extension cable from the camera through the tailgate and chassis to the location of your aftermarket radio or display. Ensure the cable is protected from damage.
4. ڊسپلي سان ڳنڍيو: Connect the video output cable from the camera harness to the video input of your aftermarket radio or monitor.
5. پاور ڪنيڪشن: Connect the power wires of the camera harness to a suitable 12-volt power source, typically the vehicle's reverse light circuit, so the camera activates when the vehicle is in reverse.
6. ٽيسٽ ڪارڪردگي: Reconnect the vehicle's battery and test the camera's operation. Engage reverse gear and verify that the camera image appears on your display.
7. محفوظ وائرنگ: Once confirmed operational, secure all wiring with zip ties or electrical tape to prevent rattling or damage.

Figure 1: The iBeam TEDGH Ram Tailgate Handle Camera, showing the integrated camera lens on the left side of the handle and the attached wiring harness on the right.

Figure 2: A closer front view of the iBeam TEDGH Ram Tailgate Handle Camera, highlighting the camera lens and the handle mechanism.

آپريٽنگ هدايتون

The iBeam TEDGH camera operates automatically when the vehicle is placed into reverse gear, provided it is correctly wired to the reverse light circuit or a switched 12V source that activates with reverse.

• خودڪار چالو: When you shift your vehicle into reverse, the camera will automatically display the rear view on your connected aftermarket monitor.
• پارڪنگ لائنون: The camera features integrated parking lines to assist with judging distance and alignment. These lines are defeatable, meaning they can be turned on or off. The method for defeating (enabling/disabling) parking lines typically involves cutting a specific wire loop on the camera harness during installation. Consult the wiring diagram provided with the product for exact instructions.
• رات جو خواب: The 0.5 LUX night vision capability allows for clear visibility even in very low light conditions, enhancing safety during nighttime parking or maneuvering.

سار سنڀال

To ensure optimal performance and longevity of your iBeam TEDGH camera, follow these simple maintenance guidelines:

• لينس صاف ڪريو: ڪئميرا لينس کي باقاعدي طور تي نرم، ڊي سان صاف ڪريوamp cloth to remove dirt, dust, and debris that may obstruct the view. Avoid abrasive cleaners or materials that could scratch the lens.
• وائرنگ جي چڪاس ڪريو: Periodically check the wiring and connections for any signs of wear, fraying, or corrosion. Ensure all connections remain secure.
• هاءِ پريشر واشنگ کان پاسو ڪريو: When washing your vehicle, avoid directing high-pressure water jets directly at the camera lens or housing, as this could potentially damage the seal or internal components.

مشڪلاتون

If you encounter issues with your iBeam TEDGH camera, refer to the following common troubleshooting steps:

وضاحتون

وارنٽي ڄاڻ

iBeam products are manufactured by Metra Electronics Corp. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Metra Electronics webسائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

ڪسٽمر سپورٽ

Should you require further assistance, technical support, or have questions not covered in this manual, please contact Metra Electronics Corp. customer support. Contact information can typically be found on their official webسائيٽ تي يا پراڊڪٽ پيڪنگنگ تي.

Manufacturer: Metra Electronics Corp