sygonix SY-RSL-T2 / SY-3523470 Wireless Wall Switch Instruction Manual

1. تعارف

The sygonix SY-RSL-T2 / SY-3523470 is a wireless wall switch designed for convenient control of RSL-compatible receivers. This device allows you to remotely switch various electrical appliances or lighting fixtures ON and OFF, enhancing comfort and flexibility in your home or office. Its ultra-flat design ensures a discreet and modern appearance.

Key features include the ability to control up to 10 receivers per channel and an operational range of up to 70 meters in an open field environment.

2. حفاظتي هدايتون

Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or property damage.

• ڊوائيس نه کوليو ۽ نه ئي تبديل ڪريو. اندر ڪو به استعمال ڪندڙ جي خدمت لائق پرزا نه آهن.
• Keep the device away from moisture, water, and extreme temperatures.
• هي ڊوائيس صرف اندروني استعمال لاء آهي.
• Ensure the mounting surface is stable and appropriate for the device.
• بيٽري جي حفاظت: The device requires a 12V battery (not included). Ensure correct polarity when inserting the battery. Do not mix old and new batteries, or different types of batteries. Dispose of used batteries according to local regulations.

3. پيڪيج مواد

پيڪنگ ڪرڻ وقت پڪ ڪريو ته سڀئي شيون موجود آهن:

• 1 x sygonix SY-RSL-T2 / SY-3523470 Wireless Wall Switch

4. پراڊڪٽ ختمview

The sygonix wireless wall switch features a simple rocker design for intuitive operation. The front panel includes two distinct markings: 'I' for ON and 'O' for OFF. The rear of the switch houses the battery compartment and mounting points.

سامهون view of the sygonix SY-RSL-T2 wireless wall switch, showing the 'I' (on) and 'O' (off) rocker buttons.

5. سيٽ اپ (انسٽاليشن)

5.1. بيٽري داخل ڪرڻ

1. Carefully separate the front plate from the back mounting plate of the switch.
2. Locate the battery compartment on the back of the switch.
3. Insert one 12V battery (e.g., A27 type) into the compartment, ensuring the correct polarity (+/-) as indicated.
4. Reattach the front plate to the back mounting plate.

A hand holding the front plate of the sygonix SY-RSL-T2 wireless wall switch, revealing the back plate with a 12V battery inserted.

5.2. سوئچ لڳائڻ

The wireless wall switch can be mounted on a wall using screws or adhesive tape (not included).

1. Choose a suitable, clean, and dry location for mounting.
2. If using screws: Mark the desired position for the mounting holes. Drill pilot holes if necessary. Secure the back mounting plate to the wall using appropriate screws.

Two screws installed on a wall, indicating mounting points for the wireless wall switch.

3. Once the back plate is secured, snap the front switch unit onto the mounting plate.

The sygonix SY-RSL-T2 wireless wall switch mounted on a wall.

5.3. Pairing with RSL Receivers

To control an RSL receiver (e.g., a wireless socket or dimmer), the wall switch must be paired with it. The pairing process typically involves these general steps:

1. Ensure your RSL receiver is powered on and within range of the wall switch.
2. Put the RSL receiver into pairing mode. This usually involves pressing a small button on the receiver for a few seconds until an indicator light (e.g., LED) starts flashing. Refer to your specific RSL receiver's instruction manual for precise pairing instructions.
3. While the receiver is in pairing mode, press either the 'I' (ON) or 'O' (OFF) button on the sygonix wireless wall switch. This sends a pairing signal.
4. The receiver's indicator light should stop flashing or change color to confirm successful pairing.
5. Test the connection by pressing the 'I' and 'O' buttons on the wall switch to ensure the receiver responds correctly.

The sygonix SY-RSL-T2 / SY-3523470 can control up to 10 RSL receivers per channel.

6. آپريٽنگ هدايتون

Once the wall switch is installed and paired with your RSL receiver(s), operation is straightforward:

• To turn the connected device ON، دٻايو 'I' button on the wall switch.
• To turn the connected device بند، دٻايو 'O' button on the wall switch.

The switch communicates wirelessly with the paired receivers. The effective range is up to 70 meters in an open field, which may be reduced by walls, ceilings, and other obstructions.

7. سار سنڀال

To ensure optimal performance and longevity of your sygonix wireless wall switch, follow these maintenance guidelines:

• صفائي: Clean the surface of the switch with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• بيٽري مٽائڻ: Replace the 12V battery when the switch no longer responds reliably, the range decreases significantly, or the indicator light (if present on your receiver during pairing) suggests a weak signal.
• اسٽوريج: If storing the device for an extended period, remove the battery to prevent leakage. Store in a cool, dry place.

8. مسئلا حل ڪرڻ

If you encounter issues with your sygonix wireless wall switch, refer to the following common problems and solutions:

• ڊوائيس جواب نه ڏئي رهيو آهي:
  • Check if the 12V battery in the wall switch is correctly inserted and has sufficient charge. Replace if necessary.
  • Ensure the wall switch is properly paired with the RSL receiver. If unsure, repeat the pairing process (Section 5.3).
  • Verify that the RSL receiver is powered on and functioning correctly.
  • Ensure the wall switch and receiver are within operational range and there are no significant obstructions (e.g., thick walls, metal objects) between them.
• Reduced operational range:
  • The battery may be low. Replace the 12V battery.
  • Relocate the wall switch or receiver to minimize obstructions and interference.
  • Avoid placing the switch near large metal objects or other wireless devices that might cause interference.

9. وضاحتون

10. وارنٽي ۽ سپورٽ

For detailed warranty information, technical support, or service inquiries regarding your sygonix SY-RSL-T2 / SY-3523470 Wireless Wall Switch, please refer to the official sygonix webسائيٽ تي وڃو يا پنهنجي مجاز پرچون ڪندڙ سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.