1. تعارف
This manual provides essential instructions for the installation, operation, and maintenance of your FSP iFP600 Uninterruptible Power Supply (UPS). Please read this manual thoroughly before installing or operating the unit to ensure proper function and safety. The FSP iFP600 is designed to provide reliable power backup and surge protection for your electronic devices.

تصوير 1.1: سامهون view of the FSP iFP600 UPS, showcasing its compact design and integrated LCD display.
2. حفاظتي هدايتون
Please adhere to these important safety guidelines during installation, operation, and maintenance of the UPS:
- يو پي ايس سي نه کوليوasing. اندر ڪو به استعمال ڪندڙ جي خدمت لائق پرزا نه آهن. سڀني سروسنگ کي قابل سروس اهلڪارن جي حوالي ڪريو.
- Do not connect appliances that could overload the UPS, such as laser printers, vacuum cleaners, or heaters.
- پڪ ڪريو ته يو پي ايس گرائونڊ ٿيل اي سي پاور آئوٽليٽ سان ڳنڍيل آهي.
- Avoid placing the UPS in direct sunlight, near heat sources, or in environments with excessive dust, humidity, or corrosive substances.
- Position the UPS in a well-ventilated area to prevent overheating.
- In case of fire, use a dry chemical extinguisher. Water can be hazardous.
- The battery inside the UPS is not user-replaceable. Battery replacement should only be performed by qualified personnel.
3. پراڊڪٽ ختمview
The FSP iFP600 UPS provides reliable power protection for your critical electronics. It features a compact design and an intuitive LCD display for monitoring status.
3.1 پيڪيج مواد
پيڪيج کولڻ تي، مھرباني ڪري تصديق ڪريو ته سڀئي جزا موجود آھن ۽ نقصان کان بچيل آھن:
- FSP iFP600 UPS Unit
- استعمال ڪندڙ جو دستياب (ھي دستاويز)
- پاور ڪنڊ
- USB ڪميونيڪيشن ڪيبل

Image 3.1: The FSP iFP600 UPS shown alongside its retail packaging, illustrating the product's presentation.
3.2 پوئين پينل جا حصا
Familiarize yourself with the connections on the rear panel of the UPS:

تصوير 3.2: تفصيلي view of the FSP iFP600 UPS rear panel, highlighting connection points.
- آئوٽليٽ: Two SCHUKO type outlets for connecting protected equipment.
- AC ان پٽ: Connects the UPS to the main utility power.
- Fuse/Breaker: Overcurrent protection for the UPS.
- USB ڪميونيڪيشن: Port for connecting to a computer for monitoring and management.
- Combo RJ11/RJ45 Surge Protection: Provides surge protection for telephone/network lines.
4. سيٽ اپ ۽ تنصيب
Follow these steps to set up your FSP iFP600 UPS:
- پيڪنگ کولڻ: Carefully remove the UPS from its packaging. Inspect for any shipping damage.
- لڳائڻ: Place the UPS on a flat, stable surface in a clean, cool, and well-ventilated area. Ensure adequate clearance around the unit for airflow.
- شروعاتي چارج: Connect the UPS to a standard grounded AC outlet using the provided power cord. Allow the unit to charge for at least 4-6 hours before initial use to ensure optimal battery performance. The UPS will charge whether it is turned on or off.
- ڳنڍڻ جو سامان: Plug your computer, monitor, and other critical electronic devices into the UPS outlets (A). Do not connect surge suppressors or power strips to the UPS outlets.
- USB Communication (Optional): Connect the USB cable from the UPS USB port (D) to your computer's USB port to enable power management software features (software not included, typically downloaded from manufacturer's webسائيٽ).
- RJ11/RJ45 Protection (Optional): For surge protection of your telephone or network line, connect the incoming line to the 'IN' port of the Combo RJ11/RJ45 (E) and connect the 'OUT' port to your device.
5. آپريٽنگ هدايتون
5.1 پاور آن/آف
- پاور آن ڪرڻ: Press and hold the power button on the front panel for approximately 2 seconds until you hear a beep and the LCD display illuminates.
- پاور آف ڪرڻ: Press and hold the power button for approximately 2 seconds until you hear a beep and the LCD display turns off.
5.2 LCD ڊسپلي جي معلومات
The FSP iFP600 features an LCD display that provides real-time status information. The display is touch-sensitive for navigating information.

Image 5.1: The LCD display of the FSP iFP600 UPS, indicating voltage output and its touch-screen functionality.
The LCD display typically shows:
- انٽ واليمtage
- اوٽ وولٽtage
- بيٽري چارج جي سطح
- لوڊ سطح
- Operating Mode (e.g., AC mode, Battery mode)
- Warning/Fault Indicators
5.3 Battery Mode Operation
When the utility power fails or fluctuates outside acceptable limits, the UPS will automatically switch to battery mode. During battery mode, the UPS will provide power to connected equipment from its internal battery. An audible alarm will sound to indicate battery operation.
6. سار سنڀال
Proper maintenance ensures the longevity and reliability of your UPS.
- صفائي: Use a soft, dry cloth to clean the exterior of the UPS. Do not use liquid or aerosol cleaners.
- بيٽري جي سنڀال: To maximize battery life, ensure the UPS is connected to AC power and fully charged. If the UPS is stored for an extended period, recharge it every three months to prevent battery degradation.
- بيٽري مٽائڻ: The internal battery (12V / 7Ah x1) is not user-serviceable. Battery replacement should only be performed by FSP-certified service personnel or a qualified technician. Incorrect battery replacement can pose a risk of explosion or injury.
- اسٽوريج: Store the UPS in a cool, dry place with adequate ventilation. Ensure the battery is fully charged before storage.
7. مسئلا حل ڪرڻ
Refer to the following table for common issues and their solutions. If the problem persists, contact FSP support.
| علامتي | ٻڌڻ وارو الارم | ممڪن سبب | حل |
|---|---|---|---|
| UPS operating on battery power | هر 10 سيڪنڊ تائين بيپس | Utility power failure or fluctuation | Save work and shut down equipment if power outage is prolonged. UPS will return to AC mode when power is restored. |
| گھٽ بيٽري ڊيڄاريندڙ | هر سيڪنڊ بيپ | بيٽري چارج انتهائي گهٽ آهي. | Immediately save work and shut down connected equipment. |
| اوور لوڊ حالت | بيپ هر 0.5 سيڪنڊ | ڳنڍيل سامان UPS جي گنجائش کان وڌيڪ آهي | Disconnect non-essential equipment until the alarm stops. Ensure total load is within UPS capacity. |
| UPS غلطي | مسلسل بيپ ڪرڻ | اندروني خرابي يا خرابي | Turn off the UPS and disconnect it from the AC outlet. Contact FSP technical support. |

Image 7.1: Excerpt from the FSP iFP series specification table, detailing alarm indicators and their meanings.
8. وضاحتون
Detailed technical specifications for the FSP iFP600 UPS:
| خاصيت | تفصيل |
|---|---|
| ماڊل | iFP 600 |
| ظرف | 600 VA / 360 W |
| انٽ واليمtage | 110/120 Vac or 220/230/240 Vac |
| انٽ واليمtage حد | 81-145 Vac / 140-290 Vac |
| انپٽ فریکوئنسي رينج | 60/50 Hz (خودڪار سينسنگ) |
| اوٽ وولٽtage | 110/120 Vac or 220/230/240 Vac |
| AC جلدtagاي ضابطو (بيٽ موڊ) | ±10% |
| Output Frequency Range (Batt. Mode) | 60 Hz or 50 Hz ±1 Hz |
| منتقلي وقت | عام 2-6 ms |
| وايوفارم (بٽ موڊ) | ٺهيل Sinewave |
| بيٽري جو قسم ۽ نمبر | 12V / 7Ah x1 |
| عام ريچارج وقت | 4٪ گنجائش تائين 90 ڪلاڪ |
| اشارا | LCD Display (Touch panel with digital information) |
| تحفظ | Overload, Discharge, and Overcharge Protection |
| شيءِ جو وزن | 9.24 پائونڊ (4.2 ڪلوگرام) |
| پيداوار جي ماپ (LxWxH) | 11.81 x 3.98 x 5.59 انچ |
| رنگ | ڪارو |
| مواد | ڌاتو |
9. وارنٽي ۽ سپورٽ
FSP products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official FSP website. For technical support, troubleshooting assistance, or service inquiries, please contact FSP customer service through their official channels.
توهان وڌيڪ معلومات ۽ سپورٽ وسيلا ڳولي سگهو ٿا FSP Store on Amazon.





