1. تعارف
Thank you for choosing the SENCOR SWS 4250 Weather Station. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read these instructions carefully before use and retain them for future reference.
2. حفاظت جي ڄاڻ
- Do not expose the main unit or sensor to extreme temperatures, direct sunlight, or moisture.
- Use only the specified power adapter (DC 4.5V/150mA) for the main unit.
- Ensure correct battery polarity when inserting batteries into both the main unit and the sensor.
- Keep batteries out of reach of children. Do not mix old and new batteries or different types of batteries.
- پاڻ ڊوائيس کي ڌار ڪرڻ يا مرمت ڪرڻ جي ڪوشش نه ڪريو. سڀني سروسنگ کي قابل اهلڪارن جي حوالي ڪريو.
3. پيڪيج مواد
- SENCOR SWS 4250 Main Unit
- Wireless Outdoor Sensor (SWS TH4250)
- DC 4.5V/150mA Power Adapter
- استعمال ڪندڙ دستي
4. پراڊڪٽ ختمview
The SENCOR SWS 4250 Weather Station features a color LCD display for clear visibility of weather forecasts, indoor/outdoor temperature, humidity, time, and date. It supports up to three wireless outdoor sensors, with one included.
Image 1: SENCOR SWS 4250 Weather Station Main Unit and Wireless Sensor. The main unit features a color LCD display, while the compact outdoor sensor transmits data wirelessly.
5. سيٽ اپ
5.1. بيٽري لڳائڻ
- مکيه يونٽ: Open the battery compartment on the back. Insert 3 x 1.5V AAA batteries (not included), observing the correct polarity (+/-). Close the compartment.
- ٻاھرين سينسر: Open the battery compartment. Insert 2 x 1.5V AA batteries (not included), observing the correct polarity (+/-). Close the compartment.
5.2. مکيه يونٽ کي طاقت ڏيڻ
Connect the provided DC 4.5V/150mA power adapter to the main unit's power input and then plug it into a wall outlet. The display will illuminate.
5.3. Sensor Placement and Synchronization
Place the outdoor sensor in a shaded, dry location away from direct sunlight and rain, ensuring it is within 30 meters (open area) of the main unit. The main unit will automatically attempt to synchronize with the sensor. This may take a few minutes. Once connected, the outdoor temperature and humidity will appear on the display.
5.4. چڙهڻ جا اختيار
- ٽيبل ٽاپ: Use the integrated stand on the back of the main unit to place it on a flat surface.
- ڀت جبل: Use the hanging hole on the back of the main unit to mount it on a wall using a screw (not included).
6. آپريٽنگ هدايتون
6.1. معلومات ڏيکاريو
The color LCD display shows the following information:
- Weather forecast icons (sunny, partly cloudy, cloudy, rain)
- اندروني درجه حرارت ۽ نمي
- ٻاهرين درجه حرارت ۽ رطوبت
- Digital time (12/24 hour format)
- تاريخ ۽ هفتي جو ڏينهن
6.2. Time and Date Settings
The weather station automatically receives the DCF77 radio signal for accurate time and date synchronization. If the signal is not available or you prefer manual setting:
- کي دٻايو ۽ رکو سيٽ button (location may vary, refer to device markings) to enter manual time/date setting mode.
- استعمال ڪريو مٿي / هيٺ قدرن کي ترتيب ڏيڻ لاءِ بٽڻ.
- دٻايو سيٽ again to confirm and move to the next setting (e.g., hour, minute, year, month, day, 12/24 hour format).
6.3. درجه حرارت يونٽ جي چونڊ
کي دٻايو ° سي / ° ايف button (location may vary) to switch between Celsius and Fahrenheit temperature display.
6.4. Managing Additional Sensors
The SWS 4250 supports up to three outdoor sensors. To add additional sensors (purchased separately):
- Install batteries in the new sensor.
- On the main unit, press the چينل button to cycle through available sensor channels.
- The main unit will automatically search for and connect to new sensors on an unused channel.
7. سار سنڀال
7.1. صفائي
مکيه يونٽ ۽ سينسر کي نرم، ڊي سان صاف ڪريوamp ڪپڙو. گھڙڻ وارا صاف ڪندڙ يا محلول استعمال نه ڪريو، ڇاڪاڻ ته اهي ڊسپلي يا سي کي نقصان پهچائي سگهن ٿاasing.
7.2. بيٽري مٽائڻ
Replace batteries in both the main unit and the sensor when the low battery indicator appears on the display. Always replace all batteries in a set with new ones of the same type.
7.3. اسٽوريج
If the device will not be used for an extended period, remove all batteries to prevent leakage and store the unit in a cool, dry place.
8. مسئلا حل ڪرڻ
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| مکيه يونٽ تي ڪابه ڊسپلي ناهي | بيٽريون ختم ٿي ويون آهن يا غلط طور تي لڳايون ويون آهن؛ پاور اڊاپٽر ڳنڍيل نه آهي. | Check battery polarity and charge; ensure power adapter is securely connected. |
| ٻاهرين گرمي پد / نمي ظاهر نه ڪئي وئي آهي | Sensor batteries dead; sensor out of range; interference; sensor not synchronized. | Replace sensor batteries; move sensor closer to main unit; resynchronize sensor (remove and reinsert batteries in sensor, then main unit). |
| غلط وقت/تاريخ | DCF77 signal weak or unavailable; manual settings incorrect. | Move main unit to a location with better signal reception; set time/date manually. |
| موسم جي اڳڪٿي غلط آهي | The forecast is based on atmospheric pressure changes and may not always match local conditions perfectly. | This is normal. The forecast is an estimation. |
9. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل | SWS 4250 |
| برانڊ | سينسر |
| ڊسپلي جو قسم | رنگ LCD |
| اندروني درجه حرارت جي حد | 0 °C کان +50 °C |
| ٻاهرين درجه حرارت جي حد | -20 °C کان +60 °C |
| نمي جي حد (اندروني/ٻاهران) | 20٪ کان 90٪ RH |
| وقت جي شڪل | 12/24 ڪلاڪ چونڊيل |
| وقت جي هم وقت سازي | DCF77 Radio Controlled (Manual setting possible) |
| Wireless Sensor Support | Up to 3 sensors (1 SWS TH4250 included) |
| سينسر ٽرانسميشن فريڪئنسي | 433 MHz |
| Sensor Transmission Range | 30 ميٽر تائين (کليل علائقو) |
| مکيه يونٽ پاور | 3 x 1.5V AAA batteries (not included) or DC 4.5V/150mA adapter (included) |
| سينسر پاور | 2 x 1.5V AA بيٽريون (شامل نه آھن) |
| مکيه يونٽ جي ماپ (W x H x D) | 173 x 125 x 22 ملي ميٽر |
| مکيه يونٽ وزن | 238 جي |
| رنگ | ڪارو |
10. وارنٽي ۽ سپورٽ
For warranty information and technical support, please refer to the documentation provided with your purchase or contact SENCOR customer service. Keep your proof of purchase for any warranty claims.
