ڪڊي LT300 4G LTE وائي فائي روٽر يوزر مينوئل

1. تعارف

The Cudy LT300 is a 4G LTE Wi-Fi Router designed to provide high-speed internet access using a cellular SIM card. It supports LTE download speeds of up to 150 Mbps and Wi-Fi speeds of up to 300 Mbps. This manual provides instructions for setting up, configuring, and maintaining your LT300 router.

2. پيڪيج مواد

مھرباني ڪري پيڪيج جي مواد کي احتياط سان چيڪ ڪريو. جيڪڏھن ڪا شيءِ غائب يا خراب آھي، پنھنجي پرچون ڪندڙ سان رابطو ڪريو.

• Cudy LT300 4G LTE Wi-Fi Router
• پاور اڊاپٽر
• Ethernet ڪيبل
• Detachable LTE Antennas (x2)
• SIM Card Adapters (Nano to Micro, Nano to Standard)
• تڪڙي انسٽاليشن ھدايت

3. پراڊڪٽ ختمview

3.1. هارڊويئر اجزاء

Familiarize yourself with the ports, buttons, and LED indicators on your Cudy LT300 router.

شڪل 1: سامهون view of the Cudy LT300 router, showing the power, Wi-Fi, LTE signal, and LAN/WAN LED indicators.

• پاور LED: طاقت جي حالت کي ظاهر ڪري ٿو.
• وائي فائي LED: وائي فائي جي حيثيت ڏيکاري ٿو.
• LTE Signal LEDs: Indicate 4G LTE signal strength.
• LAN/WAN LEDs: ايٿرنيٽ پورٽ سرگرمي جي نشاندهي ڪريو.

شڪل 2: ريڙهه view of the Cudy LT300 router, displaying the power port, LAN/WAN ports, SIM card slot, and WPS/Reset button.

• پاور پورٽ: شامل ٿيل پاور اڊاپٽر کي ڳنڍيو.
• LAN/WAN بندرگاهن: Gigabit Ethernet ports for wired connections. One port can function as WAN for wired internet.
• سم ڪارڊ سلاٽ: Insert your 4G LTE SIM card here.
• WPS/ري سيٽ بٽڻ: Press for WPS function. Press and hold for 5-8 seconds to factory reset.
• Antenna Connectors: Connect the detachable LTE antennas.

4. سيٽ اپ

4.1. Install LTE Antennas

Screw the two detachable LTE antennas into the connectors on the rear panel of the router. Ensure they are securely tightened and oriented vertically for optimal signal reception.

4.2. سم ڪارڊ داخل ڪريو

The Cudy LT300 uses a standard-sized SIM card. If your SIM card is Nano or Micro, use the provided SIM card adapters to fit it into the standard slot.

1. پڪ ڪريو ته روٽر بند ٿيل آهي.
2. پوئين پينل تي سم ڪارڊ سلاٽ ڳوليو.
3. Insert the SIM card into the slot with the metal contacts facing down and the notched corner oriented correctly, as indicated on the router. Push until it clicks into place.
4. If removing, gently push the SIM card in again until it springs out.

شڪل 3: Illustration of inserting a SIM card into the Cudy LT300 router's SIM card slot.

4.3. پاور آن

Connect the power adapter to the router's power port and then plug the other end into a power outlet. The Power LED will illuminate, and the router will begin to boot up. This process may take approximately 30-60 seconds.

5. ترتيب

5.1. تائين رسائي Web انتظامي انٽرفيس

To configure your router, you need to access its web- بنياد تي انتظام انٽرفيس.

1. Connect your computer to the router via Wi-Fi (SSID and password are on the label at the bottom of the router) or an Ethernet cable.
2. کوليو a web برائوزر (مثال طور، ڪروم، فائر فاڪس، ايج).
3. ٽائيپ ڪريو ڊفالٽ IP پتو 192.168.10.1 ۾ پتو بار ۽ داخل ڪريو پريس ڪريو.
4. Enter the default login credentials. The default username is منتظم ۽ ڊفالٽ پاسورڊ آهي منتظم (or as printed on the router label).
5. Follow the on-screen instructions for the initial setup wizard, if prompted. It is recommended to change the default login password for security.

5.2. Basic Wi-Fi Settings

Navigate to the "Wireless" or "Wi-Fi Settings" section in the web interface to customize your wireless network.

• SSID (نيٽ ورڪ جو نالو): Change the default Wi-Fi network name to a unique name.
• Password (Security Key): Set a strong, secure password for your Wi-Fi network. WPA2-PSK AES is recommended.
• سيڪيورٽي موڊ: Select WPA2-PSK.

5.3. LTE/Internet Settings

The router should automatically detect your SIM card and configure the LTE connection. If not, you may need to manually configure the APN (Access Point Name) settings provided by your mobile operator.

1. Go to the "Network" or "LTE Settings" section.
2. Check the connection status. If "Disconnected" or "Limited," verify APN settings.
3. Select "Manual" APN configuration if automatic fails and enter the correct APN, username, and password from your mobile operator.
4. Save changes and reboot the router if prompted.

5.4. VoLTE Configuration

The Cudy LT300 supports VoLTE functionality. If your SIM card and mobile operator support VoLTE, you may find settings under "Voice" or "VoLTE" in the web interface to enable or configure this feature. Consult your mobile operator for specific VoLTE settings if required.

6. آپريٽنگ

6.1. ڪنيڪشن جا آلات

• وائي فائي: On your device (smartphone, tablet, laptop), search for the Wi-Fi network name (SSID) you configured and enter the Wi-Fi password.
• Ethernet: Connect an Ethernet cable from a LAN port on the router to the Ethernet port on your computer or other wired device.

6.2. ايل ايم ڊي اشارا

روٽر جي حالت کي سمجهڻ لاءِ سامهون واري پينل تي LED اشارن جي نگراني ڪريو:

• پاور LED: Solid Green (On), Off (Off).
• وائي فائي LED: Solid Green (Wi-Fi On), Blinking (Data Transfer), Off (Wi-Fi Off).
• LTE Signal LEDs: Indicate signal strength (e.g., 3 bars for strong, 1 bar for weak).
• LAN/WAN LEDs: Solid Green (Connected), Blinking (Data Transfer), Off (No Connection).

7. سار سنڀال

7.1. فرم ویئر اپڊيٽ

Regularly check for and install firmware updates to ensure optimal performance and security. Firmware files can usually be downloaded from the Cudy official webسائيٽ.

1. جديد firmware ڊائون لوڊ ڪريو file for your LT300 model.
2. تائين رسائي web انتظام انٽرفيس.
3. Navigate to "System Tools" or "Firmware Upgrade."
4. ڊائون لوڊ ٿيل فرم ويئر اپ لوڊ ڪريو file and follow the on-screen instructions. Do not power off the router during the upgrade process.

7.2. فيڪٽري ري سيٽ

A factory reset will restore the router to its default settings. This can be useful for troubleshooting or if you forget your login password.

• With the router powered on, press and hold the WPS/Reset button on the rear panel for 5-8 seconds until the LEDs flash.
• بٽڻ کي ڇڏي ڏيو. روٽر فيڪٽري ڊفالٽ سيٽنگن سان ريبوٽ ٿيندو.

8. مسئلا حل ڪرڻ

• انٽرنيٽ ڪنيڪشن ناهي:
  • Check if the SIM card is inserted correctly and activated.
  • Verify LTE signal strength via the LED indicators.
  • پڪ ڪريو ته APN سيٽنگون صحيح آهن web انٽرفيس.
  • روٽر ۽ توهان جي ڳنڍيل ڊوائيسز کي ريبوٽ ڪريو.
• رسائي نه ٿي سگهي Web انتظام انٽرفيس:
  • پڪ ڪريو ته توهان جو ڊوائيس روٽر جي وائي فائي سان يا ايٿرنيٽ ذريعي ڳنڍيل آهي.
  • IP پتي جي تصديق ڪريو 192.168.10.1 is typed correctly.
  • هڪ مختلف ڪوشش ڪريو web برائوزر.
  • Perform a factory reset if you forgot the login password.
• سست وائي فائي اسپيڊ:
  • Check LTE signal strength; a weak signal will affect overall speed.
  • Ensure the router is placed in a central location, away from obstructions and interference.
  • ڳنڍيل ڊوائيسز يا بينڊوڊٿ-گھڻي سرگرمين جو تعداد گھٽايو.
  • Consider changing the Wi-Fi channel in the web انٽرفيس.

9. وضاحتون

10. حفاظت جي ڄاڻ

• Do not expose the device to water or humidity.
• ڊوائيس کي الڳ ڪرڻ يا مرمت ڪرڻ جي ڪوشش نه ڪريو.
• صرف مهيا ڪيل پاور اڊاپٽر استعمال ڪريو.
• ڊوائيس کي گرمي جي ذريعن ۽ سڌي سج جي روشني کان پري رکو.
• ڊوائيس جي چوڌاري مناسب وائيٽليشن کي يقيني بڻائي.

11. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the warranty card included in the package or visit the official Cudy website. Support resources typically include FAQs, firmware downloads, and contact information.