GBC ShredMaster SX20-08 Cross-Cut Paper Shredder

تعارف

The GBC ShredMaster SX20-08 is a high-performance cross-cut paper shredder designed for secure disposal of sensitive documents. It offers a P-4 security level, shredding documents into small 5/32" x 1 1/2" pieces. With a capacity to shred up to 20 sheets at a time and an 8-gallon pull-out bin, it is suitable for home offices and small business environments. Key features include a long 240-minute run time, auto-reverse jam prevention, Whisper Shred Technology for quiet operation, and an Eco Power Save function for energy efficiency.

اهم حفاظتي ڄاڻ

Please read all safety instructions carefully before operating the shredder. Failure to follow these instructions may result in injury or damage to the unit.

• Keep hands, hair, loose clothing, and jewelry away from the paper entry slot.
• Do not insert more than the maximum recommended sheet capacity (20 sheets) at one time.
• استعمال ۾ نه هجڻ وقت يا ڪچري جي دٻي کي صاف ڪرڻ، منتقل ڪرڻ يا خالي ڪرڻ کان اڳ شريڊر کي ان پلگ ڪريو.
• Do not spray aerosols or lubricants into the shredder.
• This shredder is intended for indoor use only.
• ٻارن يا پالتو جانورن کي شريڊر جي ويجهو نه ڏيو.
• شريڊر کي هڪ سڌي، مستحڪم مٿاڇري تي هلايو.
• خبردار: هي پراڊڪٽ توهان کي ليڊ سميت ڪيميڪلز تائين پهچائي سگھي ٿو، جيڪا ڪيليفورنيا جي رياست کي معلوم ٿئي ٿي ته جيئن ڪينسر ۽ پيدائشي نقص يا ٻيون پيدائشي نقصان. وڌيڪ معلومات لاءِ وڃو www.P65 ورننگس .ca.gov.

پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• GBC ShredMaster SX20-08 Paper Shredder Unit
• فضول دٻي
• هدايت نامو (هي دستاويز)

سيٽ اپ ڪريو

1. پيڪنگ کولڻ: شريڊر کي احتياط سان ان جي پيڪنگ مان هٽايو. مستقبل جي ٽرانسپورٽ يا اسٽوريج لاءِ پيڪنگ کي برقرار رکو.
2. لڳائڻ: Position the shredder on a level, stable surface near a standard electrical outlet. Ensure adequate ventilation around the unit.
3. Waste Bin Installation: Ensure the 8-gallon waste bin is correctly inserted into the shredder cabinet. The shredder will not operate if the bin is not properly seated.
4. پاور ڪنيڪشن: پاور ڪنڊ کي گرائونڊ ٿيل برقي آئوٽليٽ ۾ لڳايو.

Figure 1: GBC ShredMaster SX20-08 ready for setup.

آپريٽنگ هدايتون

بنيادي آپريشن

1. پاور آن: Press the power button on the control panel. The shredder will enter standby mode, indicated by an LED light.
2. کاڌ خوراڪ جا دستاويز: Insert paper directly into the paper entry slot. The shredder will automatically detect the paper and begin shredding. Do not exceed the 20-sheet capacity. The shredder can also handle staples and paperclips.
3. مسلسل هلائڻ جو وقت: The shredder is designed for a 240-minute continuous run time, making it suitable for large shredding tasks. Allow the unit to cool down if it reaches its thermal limit.
4. Auto Reverse Jam Prevention: In case of an overload or jam, the shredder features an auto-reverse function to clear the jam. If a jam persists, manually reverse the shredder using the control panel.
5. Whisper Shred Technology: This technology ensures quiet operation, maintaining noise levels below 58 dB to minimize disruptions in office environments.
6. Eco Power Save: To conserve energy, the shredder will automatically turn off after 2 minutes of inactivity.

Figure 2: Feeding documents into the shredder.

LED اشارا

The control panel features LED indicator lights to provide operational status:

• مڪمل بن: جڏهن ڪچري جو دٻو ڀريل هوندو آهي ۽ ان کي خالي ڪرڻ جي ضرورت هوندي آهي ته روشني ٿيندي آهي.
• دروازو کوليو: Indicates that the waste bin is not properly closed or seated. The shredder will not operate until the bin is correctly positioned.
• وڌيڪ گرمائش Lights up if the shredder has been used continuously for too long and needs to cool down. Allow the unit to rest before resuming operation.
• اوور لوڊ: Activates if too many sheets are inserted at once, triggering the auto-reverse function.

Figure 3: The 8-gallon pull-out waste bin.

Figure 4: The P-4 security level ensures confidential shredding.

سار سنڀال

فضول دٻي کي خالي ڪرڻ

When the "Bin Full" indicator illuminates, the waste bin needs to be emptied. Simply pull out the bin from the front of the shredder, dispose of the shredded material, and slide the bin back into place until it clicks securely.

صفائي

• صفائي ڪرڻ کان اڳ هميشه شريڊر کي ان پلگ ڪريو.
• شريڊر جي ٻاهرين حصي کي نرم، سڪل ڪپڙي سان صاف ڪريو. رگڙيندڙ صاف ڪندڙ يا محلول استعمال نه ڪريو.
• Periodically clean the paper entry area to remove any paper dust or debris.

طريقو 1 شريڊر کي تيل لڳايو

For optimal performance and longevity, it is recommended to oil the shredder blades regularly, especially after emptying the waste bin or after heavy use. Use shredder oil specifically designed for paper shredders. Apply a thin line of oil across the paper entry slot and then run a few sheets of paper through the shredder to distribute the oil.

مشڪلاتون

وضاحتون

وارنٽي ۽ سپورٽ

GBC products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official GBC webسائيٽ.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact GBC Customer Service. Contact information can typically be found on the GBC webسائيٽ تي يا توهان جي پراڊڪٽ جي پيڪنگنگ تي.

You can also visit the official GBC Store on Amazon for more product information and support: GBC Store