BRIKSMAX LED Lighting Kit for Technic Chevrolet Corvette ZR1 (Lego 42093) - User Manual

تعارف

This user manual provides comprehensive instructions for installing, operating, and maintaining your BRIKSMAX LED Lighting Kit designed specifically for the Lego Technic Chevrolet Corvette ZR1 (Lego Set 42093). This kit enhances your model with realistic lighting effects, bringing it to life. Please read all instructions carefully before beginning installation.

The Lego Technic Chevrolet Corvette ZR1 model illuminated with the BRIKSMAX LED Lighting Kit.

حفاظت جي ڄاڻ

• هن پراڊڪٽ ۾ ننڍا حصا آهن ۽ 3 سالن کان گهٽ عمر وارن ٻارن لاءِ موزون نه آهي ڇاڪاڻ ته دم گھڙڻ جا خطرا آهن.
• Keep all components away from water and excessive heat.
• Do not attempt to modify or disassemble the LED lights or wires, as this may damage the product and void the warranty.
• Ensure proper battery installation (polarity) to prevent damage to the battery holder or lights.
• Always disconnect power before performing any maintenance or adjustments.

پيڪيج مواد

Before beginning installation, please verify that all components listed below are included in your BRIKSMAX LED Lighting Kit package. The Lego model itself is not included.

Visual representation of the components included in the BRIKSMAX LED Lighting Kit.

• 2 x 30cm White Dot Lights
• 4 x 15cm Blue Dot Lights
• 4 x 30cm Red Dot Lights
• 1 x Warm White Strip Light
• 1 x 15cm ڳنڍيندڙ ڪيبل
• 1 x AA Battery Holder (Batteries not included)
• 1 x Adhesive اسڪوائر
• 1 x 30cm USB Power Cable
• 1 x 12-port Expansion Boards
• هدايت نامو (هي دستاويز)

سيٽ اپ جون هدايتون

Follow these steps carefully to install the LED lighting kit onto your Lego Technic Chevrolet Corvette ZR1 (42093) model. It is recommended to have the original Lego instruction manual handy for reference during disassembly and reassembly.

1. پنهنجو ماڊل تيار ڪرڻ

Before installing the lights, identify the sections of your Lego model where the lights will be placed. This kit is designed to integrate seamlessly, often requiring partial disassembly of certain sections of the model to route wires and secure lights. Refer to the detailed step-by-step instruction guide provided in your kit for specific disassembly and reassembly steps.

The visual impact of the lighting kit on the Lego Corvette ZR1 model.

2. Connecting the Lights

Each light component (dot lights, strip lights) has a small connector. These connectors plug into the expansion boards. The expansion boards then connect to the battery holder or USB power cable. Ensure all connections are firm but do not force them.

• هيڊ لائٽون: Use the white dot lights for the front headlights. Carefully route the wires through the existing gaps in the Lego bricks.
• Taillights: The red dot lights are for the rear taillights.
• Interior/Cabin Light: The warm white strip light is typically used for the interior cabin, providing ambient illumination.
• Underbody/Accent Lights: The blue dot lights can be used for underbody lighting or other accent areas as desired.
• تار جو انتظام: Use the adhesive squares to secure wires discreetly within the model, preventing them from being pinched or visible.

تفصيلي view of the illuminated front section of the model.

The rear of the model showcasing the red taillights and blue accent lighting.

The interior of the Corvette model illuminated by the warm white strip light.

3. پاور ڪنيڪشن

The kit can be powered using either the AA battery holder (requires 3x AA batteries, not included) or the USB power cable. Connect your chosen power source to the main expansion board.

انسٽاليشن جي عمل تي بصري گائيڊ لاءِ، مھرباني ڪري ھيٺ ڏنل سرڪاري پراڊڪٽ وڊيو ڏسو:

آپريٽنگ هدايتون

Once the lighting kit is fully installed and connected to a power source:

• If using the battery holder, ensure batteries are correctly inserted and the switch on the battery holder is in the "ON" position.
• If using the USB power cable, connect it to a compatible USB power source (e.g., USB wall adapter, power bank, computer USB port). The lights should illuminate automatically.
• To turn off the lights, either switch the battery holder to "OFF" or disconnect the USB power cable.

سار سنڀال

• صفائي: Use a soft, dry cloth to gently wipe dust from the LED lights and wires. Avoid using liquid cleaners directly on the electronic components.
• اسٽوريج: When not in use for extended periods, disconnect the power source (remove batteries or unplug USB cable) to prevent battery drain or potential damage. Store the model in a cool, dry place away from direct sunlight.
• وائر سالميت: Periodically check wires for any signs of wear, pinching, or damage. Ensure they are securely routed and not under tension.

مشڪلاتون

وضاحتون

وارنٽي ۽ سپورٽ

BRIKSMAX offers customer support for their products. If you encounter any difficulties with your product, including missing parts or technical issues, please contact the manufacturer directly.

• رابطو: Refer to the contact information provided in your kit's packaging or visit the official BRIKSMAX store on Amazon.
• وارنٽي: مخصوص وارنٽي تفصيل مختلف ٿي سگهن ٿا. مهرباني ڪري ڪنهن به وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
• واپسي: هي پراڊڪٽ Amazon ذريعي 30 ڏينهن جي واپسي/متبادل واپسي جي پاليسي لاءِ اهل آهي.

وڌيڪ مدد لاء، توھان دورو ڪري سگھو ٿا BRIKSMAX Store on Amazon.