Optex OBTT20

Optex Black Tabletop Tripod with 2-in-1 Ballhead and Built-in Smartphone Mount User Manual

Model: OBTT20

1. تعارف

خريد ڪرڻ لاءِ مهربانيasing the Optex Black Tabletop Tripod. This versatile tripod features a 2-in-1 mounting system, allowing you to securely attach both cameras and smartphones. Its compact design and adjustable ball head make it an ideal accessory for various photography and videography needs. Please read this manual carefully before use to ensure proper operation and longevity of your product.

2. مصنوعات جون خاصيتون

3. پيڪيج مواد

4. اجزاء جي ساڻپ

Familiarize yourself with the different parts of your Optex Tabletop Tripod:

Optex Tabletop Tripod with camera mount

Figure 1: Tripod with camera mounting plate visible. This image shows the tripod in its compact form, with the standard camera screw mount at the top. The blue accents on the legs and ball head adjustment knob are visible.

Optex Tabletop Tripod with smartphone mount engaged

Figure 2: Tripod with smartphone mount engaged. This image displays the tripod with the integrated smartphone holder extended and ready for use. The ball head and leg adjustment mechanisms are also clearly visible.

  1. ڪئميرا لڳائڻ اسڪرو: Standard 1/4-inch screw for cameras.
  2. اسمارٽ فون هولڊر: Integrated spring-loaded clamp for smartphones.
  3. Ball Head Adjustment Knob: Loosen to adjust the angle of the mounted device, tighten to secure.
  4. Leg Release Buttons: Press to adjust leg angles and height.
  5. ٽرائيپڊ ٽنگون: Provide stability, with 5 micro adjustments.

5. سيٽ اپ

5.1 ٽرائيپوڊ کي کولڻ

  1. Gently spread the tripod legs outwards until they click into their initial position.
  2. To adjust the leg angle, press the leg release button located on each leg and move the leg to the desired position. Release the button to lock the leg. There are 5 micro adjustments available.

5.2 Attaching a Camera

  1. Ensure the smartphone holder is folded down, revealing the standard 1/4-inch camera mounting screw.
  2. Align the camera's tripod socket with the mounting screw.
  3. Rotate the camera clockwise onto the screw until it is securely fastened. Do not overtighten.

5.3 Attaching a Smartphone

  1. Lift the integrated smartphone holder upwards until it locks into position.
  2. Gently pull the top jaw of the smartphone holder upwards to open the clamp.
  3. پنھنجي اسمارٽ فون کي ڪل ۾ داخل ڪريوamp, ensuring it is centered and securely held by the spring tension.
  4. Release the top jaw slowly to allow it to grip the smartphone.

6. ٽرپڊ هلائڻ

6.1 بال هيڊ کي ترتيب ڏيڻ

  1. To change the angle of your mounted device, loosen the ball head adjustment knob (blue knob).
  2. Position your camera or smartphone to the desired angle.
  3. Tighten the ball head adjustment knob firmly to secure the device in place.

6.2 Adjusting Leg Height and Angle

  1. Each leg has a release button. Press this button to unlock the leg's angle.
  2. Adjust the leg to one of the 5 available micro-adjustment positions.
  3. Release the button to lock the leg securely. Ensure all legs are locked before placing a device on the tripod.

7. سار سنڀال

8. مسئلا حل ڪرڻ

مسئلوممڪن سببحل
Device is unstable on tripod.Ball head not tightened; legs not fully locked; device too heavy.Ensure ball head knob is tight. Verify all leg release buttons are engaged. Check device weight against 3 kg limit.
Smartphone not fitting in holder.Holder not fully extended; smartphone too wide.Ensure the top jaw of the smartphone holder is pulled up completely. The holder accommodates most standard smartphone sizes.

9. وضاحتون

10. وارنٽي ۽ سپورٽ

For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official Optex webسائيٽ. ڪنهن به وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.