تعارف
The TOLSEN 35-inch Heavy Duty Grabber is a versatile tool designed to extend your reach, allowing you to pick up objects from various locations without bending, stretching, or straining. Its robust construction and ergonomic design make it suitable for a wide range of indoor and outdoor tasks.
حفاظت جي ڄاڻ
- Do not use the grabber to handle hazardous materials without appropriate personal protective equipment.
- Avoid attempting to lift excessively heavy objects that may damage the tool or cause injury.
- Keep fingers clear of the jaw mechanism during operation to prevent pinching.
- Store the grabber in a safe place, away from children and pets.
اجزاء
The TOLSEN Heavy Duty Grabber consists of the following main parts:
- Ergonomic هٿ: Designed for comfortable grip and control.
- ٽرگر ميڪانيزم: Activates the grabber jaws.
- Safety Locking Feature: Locks the jaws in position.
- Aluminum Alloy Tube: The main shaft providing extended reach.
- Wide Jaw with Rubber Grippers: Non-slip surfaces for secure object retrieval.
شڪل 1: ختمview of the TOLSEN 35-inch Heavy Duty Grabber.
سيٽ اپ ڪريو
The TOLSEN Heavy Duty Grabber comes pre-assembled and requires no complex setup. Simply remove it from its packaging.
آپريٽنگ هدايتون
- Grasping an Object:
Hold the ergonomic handle firmly. Position the grabber jaws around the desired object. Squeeze the trigger mechanism on the handle to close the jaws and secure the object.
Figure 2: Detail of the wide jaw and rubber grippers.
- Using the Safety Locking Feature:
Once an object is securely grasped, you can engage the safety locking feature (if present on your model) to maintain the grip without continuously squeezing the trigger. Refer to the handle design for the specific lock mechanism, typically a button or lever near the trigger.
Figure 3: Grabber holding a common household item.
- ريليasing an Object:
To release the object, disengage the safety lock (if used) and release the trigger. The jaws will open, releasing the item.
Figure 4: Grabber jaws ready to grasp an object.
سار سنڀال
- صفائي: Wipe the grabber with a damp cloth to remove dirt or debris. Avoid using harsh chemicals that may damage the materials.
- اسٽوريج: Store the grabber in a dry place. The integrated hanger on the handle allows for convenient storage.
- چڪاس: Periodically check the jaws and trigger mechanism for any signs of wear or damage.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Jaws do not close properly. | Debris in mechanism, bent components. | Inspect jaws for obstructions and clear them. If components are bent, discontinue use. |
| Object slips from jaws. | Insufficient grip, slippery object, worn rubber grippers. | Ensure a firm squeeze on the trigger. Clean rubber grippers. Avoid lifting objects beyond the tool's capacity. |
| Trigger mechanism feels stiff. | Dirt accumulation, lack of lubrication. | Clean the trigger area. A small amount of silicone lubricant may be applied to moving parts if necessary. |
وضاحتون
- ماڊل: ٽي ايل ايس اين-50093
- ڊگھائي: 35 انچ (88.9 سينٽي)
- چمڙي جو افتتاح: تقريبن 10 انچ (25.4 سينٽي)
- مواد: Anodized Aluminum Alloy, Stainless Steel, Rubber
- وزن: تقريبن 13.6 آونس (385 گرام)
- ٺاهيندڙ: TOLSEN TOOLS
وارنٽي ۽ سپورٽ
For warranty information or technical support, please contact TOLSEN customer service through their official website or the retailer where the product was purchased. Please have your model number (TLSN-50093) and purchase date available.
