Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. تعارف

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. حفاظت جي ڄاڻ

• انسٽاليشن ۽ آپريشن کان پهريان سڀ هدايتون احتياط سان پڙهو.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• ڊوائيس ٻارن جي پهچ کان پري رکو.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x ماونٽنگ بریکٹ
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. پراڊڪٽ ختمview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

شڪل 1: سامهون view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

اهم اجزاء:

• PIR Lens: Detects infrared radiation from moving bodies.
• LED اشارو: Provides status feedback (e.g., detection, low battery).
• بيٽري جو خانو: Houses the power source.
• چڙهڻ جا نقطا: For secure installation on a wall.
• Tamper سوئچ: Triggers an alarm if the sensor cover is opened.

5. سيٽ اپ

5.1. بيٽري لڳائڻ

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. سينسر لڳائڻ

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. ڀت تي اسڪرو پوزيشن کي نشانو بڻائڻ لاءِ ٽيمپليٽ جي طور تي چڙهڻ واري بریکٹ استعمال ڪريو.
3. نشان لڳل جڳهن تي سوراخ ڪريو ۽ ڀت جا پلگ داخل ڪريو.
4. مهيا ڪيل اسڪرو استعمال ڪندي ڀت تي چڙهڻ واري بریکٹ کي محفوظ ڪريو.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. سينسر کي هلائڻ

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. ايل اي ڊي اشاري جي حيثيت

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• روشني ناهي: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view بجاءِ سڌو سنئون ان جي طرف.

7. سار سنڀال

7.1. صفائي

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. بيٽري مٽائڻ

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. باقاعده چيڪ

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. مسئلا حل ڪرڻ

9. وضاحتون

• برانڊ: Intelbras
• ماڊل: IVP2000SF
• طاقت جو ذريعو: بيٽري طاقت
• بيٽري جو قسم: Alkaline
• چڙهڻ جو قسم: ڀت تي چڙهڻ
• مطابقت رکندڙ ڊوائيسز: Intelbras security systems and smart home hubs
• پيداوار جي ماپ: تقريبن 17 x 10 x 9 سينٽي (6.7 x 3.9 x 3.5 انچ)
• ڳولڻ جو طريقو: غير فعال انفراريڊ (PIR)
• ڳولڻ جي حد: 12 ميٽر (39 فوٽ) تائين
• ڳولهي زاويه: تقريبن 90 درجا
• آپريٽنگ ماحول: صرف اندروني استعمال

10. وارنٽي ڄاڻ

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webسائيٽ تي وڃو يا انهن جي ڪسٽمر سپورٽ سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

11. سپورٽ

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Webسائيٽ: Visit the official Intelbras webسپورٽ وسيلن، اڪثر پڇيا ويندڙ سوالن، ۽ رابطي جي معلومات لاءِ سائيٽ.
• فون: Refer to the contact section on the Intelbras webمقامي سپورٽ نمبرن لاءِ سائيٽ.