InnoGear Microphone Boom Arm Stand Kit

تعارف

This manual provides detailed instructions for the assembly, operation, and maintenance of your InnoGear Microphone Boom Arm Stand Kit. Please read this manual thoroughly before use to ensure proper setup and optimal performance. This kit is designed to provide a stable and adjustable platform for various microphones, enhancing your recording and streaming experience.

حفاظت جي ڄاڻ

• ميز کي يقيني بڻايو وڃيamp is securely fastened to a stable surface before attaching the boom arm.
• Do not overload the boom arm beyond its maximum weight capacity of 3.3 lbs (1.5 kg).
• Avoid sudden movements or excessive force when adjusting the arm to prevent damage or instability.
• Keep all components away from water and extreme temperatures.

پيڪيج مواد

پڪ ڪريو ته هيٺ ڏنل سڀئي شيون توهان جي پيڪيج ۾ شامل آهن:

• 1 x Microphone Stand (Boom Arm)
• 1 x Zinc Alloy Table Mounting Clamp
• 1 x 3/8" to 5/8" Metal Screw Adapter
• 1 x پاپ فلٽر
• 1 x شاک جبل
• 5 x ڪيبل ٽائيون

Image: All components included in the InnoGear Microphone Boom Arm Stand Kit.

سيٽ اپ جون هدايتون

1. Install the Table Mounting Clamp:

   Attach the zinc alloy table mounting clamp to a sturdy desk or table edge. Ensure the surface thickness is no more than 2 inches (5 cm). Tighten the screw firmly until the clamp is stable. The clamp features a sponge pad to protect your desk surface.

   

   Image: Close-up of the desk clamp with its protective sponge pad.

   

   Image: Diagram illustrating compatible and incompatible desk edge types for the clamp. ڪلamp fits flat surfaces up to 2 inches thick and is not suitable for slanted or curved edges.

2. Attach the Boom Arm:

   Insert the base of the microphone boom arm into the hole on the table mounting clamp. ڪل تي اسڪرو کي سخت ڪريوamp to secure the arm in place.
3. Mount Your Microphone:

   Depending on your microphone, you may need to use the included 3/8" to 5/8" metal screw adapter. Screw the microphone directly onto the boom arm's thread, or attach the shock mount first.

   

   Image: Illustration of attaching a microphone to the boom arm, showing the 3/8" to 5/8" adapter.

4. Install the Shock Mount:

   If using the shock mount, screw it onto the boom arm's thread. Then, carefully place your microphone into the shock mount. Note: The included shock mount is designed for microphones with an outer diameter of 40-53mm and is NOT compatible with Blue Yeti or Blue Snowball microphones.

   

   تصوير: تفصيلي view of the premium shock mount with dimensions (2.05 in, 3.35 in, 2.24 in) and a clear warning that it is not suitable for Blue Yeti microphones.

   

   Image: Visual guide showing various microphones compatible with the shock mount (e.g., Fifine K669B, MPM-1000, NT1-A, TONOR Q9, NW-800, NW-700, HyperX QuadCast, AT2035). It reiterates that the shock mount fits mics with an outer diameter of 40-53mm and is not for Blue Yeti or Blue Snowball.

5. پاپ فلٽر لڳايو:

   The pop filter can be clamped directly onto the boom arm or your desk. Position it in front of your microphone to reduce plosive sounds.

   

   Image: Close-up of the double-screen pop filter, highlighting its close-weave surface for preventing saliva spraying.

6. ڪيبل جو انتظام:

   Use the provided cable ties to neatly secure your microphone cable along the boom arm, preventing tangles and maintaining a clean setup.

   

   Image: A user speaking into a microphone mounted on the boom arm, with cable ties managing the microphone cable.

آپريٽنگ هدايتون

بوم بازو کي ترتيب ڏيڻ

The InnoGear boom arm is designed for flexible positioning. It features multiple adjustable joints:

• The base rotates 360° for full horizontal movement.
• The arm segments can be extended 135° back and forth.
• The microphone attachment point can be adjusted 180° up and down.

Loosen the adjustment knobs at each joint to reposition the arm, then tighten them to secure the desired angle and height. The arm's strong springs provide stability and prevent accidental dropping, supporting microphones up to 3.3 lbs (1.5 kg).

Image: Diagram showing the adjustable range of the boom arm, including 13.8 inch reach, 270° and 180° arm articulation, and 360° base rotation.

Image: Three detailed views illustrating the 360° rotation at the base, 270° articulation of the lower arm, and 180° articulation of the upper arm for precise positioning.

لوڊ گنجائش جي ترتيب

The boom arm features two positioning screw options to adjust load-bearing capacity. If your microphone is heavier, you can switch the spring's attachment point to the second hole to increase stability and support.

Image: Illustration demonstrating the heavy-duty construction and a maximum load capacity of 3.3 lbs. It also shows the two positioning screw options for adjusting spring tension.

Image: Close-up of the boom arm's spring mechanism, indicating a maximum loading capacity of 3.3 lbs.

مطابقت

The InnoGear Microphone Boom Arm is designed for wide compatibility with various microphones. It includes a 3/8" to 5/8" screw adapter to fit most standard microphone threads.

Microphone Compatibility (with 3/8" to 5/8" adapter):

• نيرو يتي
• Blue Snowball
• HyperX QuadCast S
• HyperX SoloCast
• Fifine AM8
• Fifine K669B
• شور MV7
• Fifine A6V
• And other standard-sized microphones.

Microphone Clip Holder Compatibility:

The included microphone clip holder is suitable for microphones with a maximum diameter of 1.26 inches (32mm), such as:

• شور ايس ايم 58
• شنڪو
• فائن K6
• Samson Q2U

Image: Visual chart detailing wide compatibility with various microphones using the 3/8" to 5/8" screw adapter and the microphone clip holder.

سار سنڀال

• صفائي: Wipe the boom arm and accessories with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• جوڙ: Periodically check the tightness of all screws and knobs. Tighten if necessary to maintain stability.
• اسٽوريج: When not in use, the boom arm can be folded for compact storage.

مشڪلاتون

Problem: Boom arm is unstable or sags.

حل: ميز کي يقيني بڻايو وڃيamp is securely tightened. Verify that your microphone's weight does not exceed the 3.3 lbs (1.5 kg) capacity. Adjust the spring tension by moving the positioning screw to the second hole if applicable.

Problem: Microphone does not fit the shock mount.

حل: The shock mount is designed for microphones with an outer diameter of 40-53mm. It is not compatible with Blue Yeti or Blue Snowball microphones. If your microphone falls outside this range or is one of the incompatible models, you will need a different shock mount or microphone clip.

Problem: Microphone does not screw onto the boom arm.

حل: Ensure you are using the correct 3/8" to 5/8" screw adapter if your microphone requires it. Check the threading on both the microphone and the arm for any damage.

Problem: Pop filter is not effective.

حل: Ensure the pop filter is positioned correctly, approximately 2-3 inches in front of the microphone, and that the microphone is speaking into the side of the pop filter facing the user.

وضاحتون

وارنٽي ۽ سپورٽ

InnoGear products come with a standard manufacturer's warranty. For specific warranty details, technical support, or customer service inquiries, please refer to the official InnoGear webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سپورٽ سان رابطو ڪريو. وارنٽي دعوائن لاءِ پنهنجي خريداري جي رسيد رکو.