MXR M303 ڪلون لوپر پيڊل يوزر مينوئل

1. تعارف

The MXR M303 Clone Looper Pedal is a compact effects unit designed for recording and layering audio loops. It offers up to 6 minutes of recording time with unlimited overdubs, and features such as double-speed, half-speed, and reverse playback. The pedal is equipped with an analog through-path and selectable buffered or true bypass switching to maintain signal integrity. Loops are stored even when the pedal is powered off.

Image 1.1: The MXR M303 Clone Looper Pedal, shown with three MXR patch cables and a 9V power adapter.

2. پيڪيج مواد

• MXR M303 ڪلون لوپر پيڊل
• Dunlop ECB003 9V Power Adapter
• 3 MXR Premium Patch Cables (6-inch)

3. ڪنٽرول ۽ ڪنيڪشن

3.1 مٿيون پينل ڪنٽرول

تصوير 3.1: مٿي view of the MXR M303 Clone Looper Pedal, highlighting the footswitches, knob, and indicator LEDs.

• REC/DUB Footswitch & LED (Red): Initiates recording, overdubbing, and undo/redo functions. The red LED indicates recording or overdubbing status.
• PLAY/STOP Footswitch & LED (Green): Controls loop playback and stopping. The green LED indicates playback status.
• وولم نوب: Adjusts the output level of the loop.
• SPEED LED (Blue): Indicates when the loop is playing at half-speed or double-speed.
• REVERSE LED (Yellow): Indicates when the loop is playing in reverse.

3.2 ريئر پينل ڪنيڪشن

تصوير 3.2: ريئر view of the MXR M303 Clone Looper Pedal, showing the IN, OUT, CTR, EXP, and +9VDC jacks.

• جيڪ ۾: 1/4-inch input for your instrument or other effects pedals.
• ٻاهر جيڪ: 1/4-inch output to your amplifier or next effects pedal.
• CTR Jack: 1/4-inch input for an external MXR Tap Tempo Switch to control speed, reverse, and other functions.
• ايڪس پي جڪ: 1/4-inch input for an external expression pedal (e.g., DVP volume pedal) to control loop output level, or an MXR Tap Tempo Switch for 'Play Loop Once' mode.
• +9VDC Jack: Power input for the included Dunlop ECB003 9V adapter.

4. سيٽ اپ

4.1 پاور ڪنيڪشن

1. Connect the Dunlop ECB003 9V power adapter to the +9VDC jack on the rear of the pedal.
2. پاور اڊاپٽر کي مناسب AC آئوٽليٽ ۾ لڳايو.

Image 4.1: The Dunlop ECB003 9V power adapter, included with the pedal.

4.2 آڊيو ڪنيڪشن

1. Connect your instrument (e.g., guitar) or the output of another effects pedal to the IN jack using a 1/4-inch instrument cable.
2. ڳنڍيو ٻاهر جيڪ توهان جي amplifier or the input of the next effects pedal in your signal chain using a 1/4-inch instrument cable.

Image 4.2: An MXR premium patch cable, three of which are included for connecting pedals.

5. آپريٽنگ هدايتون

5.1 بنيادي لوپنگ فنڪشن

1. Recording a Loop: کي دٻايو آر اي سي/ڊب footswitch once. The red LED will illuminate, and recording will begin immediately. A flashing 4-count LED will precede the loop start to aid timing.
2. Ending the First Loop/Starting Playback: کي دٻايو آر اي سي/ڊب footswitch again to end the initial recording and immediately begin playback. The red LED will turn off, and the green LED will illuminate.
3. اوور ڊبنگ: While a loop is playing (green LED on), press the آر اي سي/ڊب footswitch once. The red LED will illuminate, indicating overdub mode. Play your additional layer. Press آر اي سي/ڊب again to stop overdubbing and return to playback.
4. پلے بیک کي روڪڻ: While a loop is playing (green LED on), press the راند/روڪ footswitch once. The green LED will turn off, and the loop will stop.
5. Resuming Playback: While the loop is stopped, press the راند/روڪ footswitch once. The green LED will illuminate, and the loop will resume playback from the beginning.
6. Undoing the Last Overdub: While a loop is playing or stopped, press and hold the آر اي سي/ڊب footswitch for approximately 2 seconds. The last overdubbed layer will be removed.
7. Redoing the Last Overdub: After undoing an overdub, press and hold the آر اي سي/ڊب footswitch for approximately 2 seconds again to restore the undone layer.
8. Clearing All Loops: While a loop is playing or stopped, press and hold the راند/روڪ footswitch for approximately 2 seconds. All recorded loops will be erased.

5.2 Loop Volume Adjustment

جي حجم knob controls the output level of the recorded loop. Rotate clockwise to increase volume and counter-clockwise to decrease it. This allows you to balance the loop's volume with your live instrument signal.

6. ترقي يافته افعال

6.1 Speed Control (Half-Speed / Double-Speed)

While a loop is playing, quickly double-tap the آر اي سي/ڊب footswitch. Each double-tap will cycle through normal speed, half-speed (blue SPEED LED on), and double-speed (blue SPEED LED flashing). Half-speed doubles the loop length to 12 minutes, while double-speed halves it to 3 minutes.

6.2 ريورس فنڪشن

While a loop is playing, quickly double-tap the راند/روڪ footswitch. The loop will play in reverse, and the yellow REVERSE LED will illuminate. Double-tap again to return to forward playback.

6.3 External Control (CTR Jack)

Connect an MXR Tap Tempo Switch (sold separately) to the CTR jack for external control over various functions. Consult the Tap Tempo Switch manual for specific operations.

6.4 External Control (EXP Jack)

• اظهار پيڊل: Connect a DVP volume pedal (sold separately) to the ايڪس پي jack to control the loop's output level externally.
• Play Loop Once Mode: Connect an MXR Tap Tempo Switch to the ايڪس پي jack. In this configuration, pressing the Tap Tempo Switch will play the loop once and then stop, allowing for stutter effects or precise loop triggering.

7. سار سنڀال

To ensure optimal performance and longevity of your MXR M303 Clone Looper Pedal:

• پيڊل کي صاف رکو ۽ مٽي ۽ ملبي کان پاڪ رکو. صفائي لاءِ نرم، سڪل ڪپڙو استعمال ڪريو.
• پيڊل کي انتهائي گرمي پد، نمي، يا سڌي سج جي روشني ۾ بي نقاب ڪرڻ کان پاسو ڪريو.
• Always use the specified 9V DC power adapter (Dunlop ECB003) to prevent damage.
• Disconnect power when the pedal is not in use for extended periods.

8. مسئلا حل ڪرڻ

• آواز ناهي:
  • Ensure all cables are securely connected to the correct IN and OUT jacks.
  • Verify the power adapter is properly connected and functioning.
  • Check the VOLUME knob position; ensure it is not set to minimum.
  • Test with different cables and a different power source if possible.
• Loop Not Recording/Overdubbing:
  • پڪ ڪريو ته پيڊل آن آهي.
  • Confirm the REC/DUB footswitch is being pressed correctly according to the operating instructions.
• غير متوقع رويو:
  • Disconnect and reconnect power to reset the pedal.
  • Ensure no external controllers are inadvertently connected or sending conflicting signals to the CTR or EXP jacks.

9. وضاحتون

10. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the official MXR website or contact your authorized MXR dealer. Keep your proof of purchase for warranty claims.