رنگ الارم ڪي پيڊ (ٻيو نسل) هدايت نامو

تعارف

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Ring Alarm Keypad (2nd Gen). The keypad is designed to easily arm and disarm your Ring Alarm system, offering convenient control and enhanced security features.

تصوير: سامهون view of the Ring Alarm Keypad (2nd Gen), displaying the numerical keypad and mode buttons.

سيٽ اپ ۽ تنصيب

Before installation, ensure you have a Ring Alarm Kit, as it is required for the keypad's operation. The keypad can be installed in two primary ways:

• ڀت جبل: Utilize the Quick-Release Bracket for secure wall mounting.
• فليٽ سطح جي جڳھ: The keypad can also be placed on any flat surface, such as a table or shelf.

The keypad connects to your Ring Alarm Base Station via Z-Wave technology, offering a range of up to 250 feet in open air with a clear line of sight. Power is supplied by an included AC adapter, and it features a rechargeable battery for backup operation.

Image: The Ring Alarm Keypad (2nd Gen) shown both wall-mounted and resting on a wooden table, demonstrating flexible placement options.

Pairing with Your Ring Alarm System

1. Ensure your Ring Alarm Base Station is powered on and in setup mode.
2. Follow the instructions within the Ring app to add a new device.
3. The app will guide you through the pairing process. If you encounter difficulties, ensure the keypad is within range of the Base Station and try again.

ڪي پيڊ هلائڻ

The Ring Alarm Keypad (2nd Gen) allows you to manage your security system with ease. It supports three primary security modes:

• بي هٿيار: The system is off, and no sensors are actively monitoring.
• گهر: Selected sensors are armed, typically for perimeter protection while you are inside.
• پري: All sensors are armed for full protection when no one is home.

Image: A close-up of the Ring Alarm Keypad (2nd Gen) highlighting the dedicated buttons for Home, Away, and Disarm modes.

هٿياربند ۽ غير مسلح ڪرڻ

To arm or disarm your system, enter your personal identification number (PIN) on the numerical keypad, then press the desired mode button (Home, Away, or Disarm).

Image: The Ring Alarm Keypad (2nd Gen) with its buttons illuminated, indicating readiness for input.

Emergency Response Buttons

The 2nd Gen Keypad includes dedicated emergency response buttons for Police, Fire, and Medical assistance. Pressing any of these buttons will immediately trigger the alarm and initiate the appropriate emergency response, provided you have a compatible Ring Home subscription.

اهم: Activating any emergency button will sound the alarm. Use these buttons only in genuine emergency situations.

Image: The Ring Alarm Keypad (2nd Gen) with a focus on the red-outlined emergency buttons for Police, Fire, and Medical services.

LED سيٽنگون

You can customize the LED behavior of your keypad through the Ring app. Navigate to the device settings for your keypad and select 'LED Settings'. Here, you can choose the 'Keep Mode Button Lit' option when the keypad is plugged in. Otherwise, the mode light will illuminate when motion is detected by the keypad's sensor.

سار سنڀال

بيٽري کي چارج ڪرڻ

The keypad includes a rechargeable battery. To charge, connect the provided AC adapter to the charging port. Ensure the USB plug is perfectly connected to avoid charging issues. A full charge ensures backup power during outages.

صفائي

To clean the keypad, gently wipe it with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the device's finish and internal components.

مشڪلاتون

• Keypad Not Pairing: If the keypad fails to pair with your Base Station, ensure it is within the 250-foot Z-Wave range and there are no significant obstructions. Try restarting the pairing process through the Ring app. If issues persist, contact Ring customer support.
• چارج جا مسئلا: If the keypad is not charging, verify that the AC adapter is securely connected to both the keypad's port and a working power outlet. The charging port is narrow, so ensure a firm and correct connection.
• آواز جي معيار: In rare cases, users have reported initial scratchy sound from the keypad. This issue may resolve itself over time or with firmware updates. Ensure your Ring system is up to date.

وضاحتون

وارنٽي ۽ سپورٽ

The Ring Alarm Keypad (2nd Gen) comes with a 1 سال محدود وارنٽي ۽ سهولت. Use of the Ring Alarm Kit is subject to the terms found on the official Ring webسائيٽ.

وڌيڪ معلومات ۽ مدد لاءِ، مھرباني ڪري دورو ڪريو رنگ الارم ڪٽ سپورٽ پيج. For monitoring licenses, refer to رنگ.com/لائسنس.