تعارف
This manual provides essential information for the safe operation, installation, and maintenance of your BADLAND APEX Synthetic 12,000 Lb. Wireless Winch. Please read this manual thoroughly before using the winch to ensure proper function and to prevent injury or damage.
Image: The BADLAND APEX 12,000 Lb. Wireless Winch, featuring its robust black housing, synthetic rope, fairlead, and a wireless remote control unit. This image illustrates the primary components of the winch system.
اهم حفاظتي ڄاڻ
ونچ هلائڻ وقت هميشه حفاظت کي ترجيح ڏيو. انهن هدايتن تي عمل ڪرڻ ۾ ناڪامي سنگين زخمي يا ملڪيت کي نقصان پهچائي سگھي ٿي.
- ھدايت پڙھو: Understand all warnings and operating procedures before use.
- حفاظتي سامان پائڻ: هميشه ڳري ڊيوٽي دستانا ۽ اکين جي حفاظت پائڻ.
- استعمال ڪرڻ کان اڳ چڪاس ڪريو: Check the winch, rope, hooks, and all connections for damage or wear.
- Never Overload: Do not exceed the winch's rated capacity.
- محفوظ فاصلو برقرار رکڻ: Keep bystanders clear of the winching area.
- Avoid Shock Loads: Apply power smoothly; avoid sudden jerking.
- محفوظ گاڏي: Always set the parking brake and block wheels.
- بيٽري ختم ڪرڻ: Disconnect the battery when not in use or during maintenance.
- گرمي جي خبرداري: The motor and components can become hot during prolonged use.
سيٽ اپ ۽ تنصيب
ونچ تي چڙهڻ
The winch must be securely mounted to a flat, structural surface capable of withstanding the maximum rated pull. Use high-grade bolts and reinforcement plates as necessary.
- Choose a suitable mounting location, typically a winch bumper or mounting plate.
- Ensure the mounting surface is strong enough to handle the winch's pulling force.
- Align the winch and mark the drilling points for the mounting bolts.
- Drill holes as required and secure the winch using appropriate hardware.
- Ensure the fairlead is properly aligned with the winch drum.
برقي ڪنيڪشن
Proper electrical wiring is critical for safe and efficient operation. Consult a professional if you are unsure about wiring procedures.
- Connect the thick red cable from the winch motor to the positive (+) terminal of the vehicle battery.
- Connect the thick black cable from the winch motor to a clean, unpainted chassis ground point or the negative (-) terminal of the battery.
- پڪ ڪريو ته سڀئي ڪنيڪشن تنگ آهن ۽ سنکنرن کان آزاد آهن.
- ڪيبلن کي گرم يا هلندڙ حصن ۽ تيز ڪنارن کان پري رکو.
آپريٽنگ هدايتون
آپريشن کان اڳ چيڪ لسٽ
- Ensure the vehicle is stable and secured.
- Check the synthetic rope for frays, cuts, or damage.
- پڪ ڪريو ته سڀئي ڪنيڪشن محفوظ آهن.
- Confirm the wireless remote control is functioning and has fresh batteries.
Winching Procedure
- علائقو تيار ڪريو: Clear the winching path of obstacles and ensure bystanders are at a safe distance.
- اينڪر پوائنٽ: Select a strong, stable anchor point (e.g., tree, rock, another vehicle). Use a tree saver strap or recovery strap to protect the anchor.
- Unspool Rope: Disengage the clutch to free spool the synthetic rope to the anchor point. Leave at least five wraps of rope on the drum.
- محفوظ ٿلهو: Attach the hook securely to the recovery strap or shackle.
- مشغول ڪلچ: Re-engage the clutch fully.
- ونچنگ شروع ڪريو: Use the wireless remote control to slowly reel in the rope. Operate in short bursts to prevent overheating.
- مانيٽر: Continuously monitor the rope, anchor point, and winch for any signs of stress or malfunction.
- روڪيو: Once the recovery is complete, stop the winch.
- ڇڏڻ جو ٽينشن: Carefully release tension from the rope before disconnecting.
- Respool Rope: Neatly respool the rope under light tension.
وائرليس ريموٽ ڪنٽرول
The wireless remote allows for safe operation from a distance. Ensure the remote is paired with the winch according to the pairing instructions (refer to separate remote manual if provided).
- Press the "IN" button to reel in the rope.
- Press the "OUT" button to reel out the rope.
- Ensure the remote is kept dry and protected from impact.
سار سنڀال
باقاعده سار سنڀال توهان جي ونچ جي ڊگهي عمر ۽ قابل اعتماد ڪارڪردگي کي يقيني بڻائي ٿي.
- رسي جو معائنو: Regularly inspect the synthetic rope for frays, cuts, or signs of wear. Replace damaged rope immediately.
- صفائي: Keep the winch clean and free of dirt, mud, and debris. Rinse with fresh water after use in harsh conditions.
- برقي ڪنيڪشن: Check all electrical connections periodically for tightness and corrosion. Clean terminals as needed.
- لوڻ: Consult a service professional for internal lubrication if required. Do not attempt to lubricate the motor or gearbox unless specifically instructed.
- اسٽوريج: If storing the vehicle for extended periods, consider disconnecting the winch from the battery.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ونچ ڪم نٿو ڪري. | No power; loose electrical connections; faulty remote; clutch disengaged. | Check battery connections; ensure clutch is engaged; test remote batteries; check circuit breaker/fuse. |
| ونچ سست يا ڪمزور طريقي سان ڪم ڪري ٿو. | گھٽ بيٽري جو حجمtage; overloaded; poor electrical connections. | Charge vehicle battery; reduce load; check and clean all electrical connections. |
| موٽر اوور گرم. | Prolonged use; excessive load. | Allow winch to cool down; operate in shorter bursts; ensure not exceeding rated capacity. |
| ڊرم تي رسي الجھندي آهي. | Improper respooling; no tension during respooling. | Unspool and respool rope neatly under light tension. |
وضاحتون
- برانڊ: بيڊلينڊ
- ماڊل: ايڇ 56385
- درجه بندي لائين پل: 12,000 Lb. (Single Line)
- رسي جو قسم: مصنوعي
- شيء جو وزن: 81.8 پائونڊ
- پيڪيج جي ماپ: 24 x 14 x 14 انچ
- طاقت جو ذريعو: 12V DC (Vehicle Battery)
- ڪنٽرول: وائرليس ريموٽ
- ASIN: B0824XFNNZ
- تاريخ پهرين دستياب: نومبر 29، 2019
وارنٽي ۽ سپورٽ
وارنٽي جي معلومات ۽ ٽيڪنيڪل سپورٽ لاءِ، مھرباني ڪري ٺاھيندڙ جي سرڪاري ويب سائيٽ ڏانھن رجوع ڪريو website or contact BADLAND customer service directly. Keep your purchase receipt for warranty claims.
ٺاهيندڙ: بيڊلينڊ
حصو نمبر: ايڇ 56385
وڌيڪ مدد لاء، دورو ڪريو Harbor Freight Tools Customer Service (as BADLAND is a Harbor Freight brand).
