Sunco B11 Dusk to Dawn LED Candelabra Bulb Instruction Manual

1. تعارف

Thank you for choosing Sunco B11 Dusk to Dawn LED Candelabra Bulbs. These bulbs are designed for convenience and energy efficiency, featuring an integrated photocell sensor that automatically turns the light on at dusk and off at dawn. With a classic Edison filament style, these 5W LED bulbs provide 500 lumens of 2700K soft white light, equivalent to a 40W incandescent bulb, and are suitable for outdoor enclosed fixtures with an E12 base.

Image 1.1: Sunco B11 Dusk to Dawn LED Candelabra Bulbs. These bulbs feature a clear glass design with visible LED filaments and an E12 base.

2. سيٽ اپ ۽ تنصيب

These bulbs are designed for simple installation into standard E12 candelabra sockets. Ensure the fixture is suitable for outdoor use and is enclosed to protect the bulb from direct weather exposure.

1. بجلي بند: Before installation, ensure the power supply to the fixture is turned off at the circuit breaker to prevent electrical shock.
2. پراڻو بلب هٽايو: Carefully unscrew and remove the existing bulb from the fixture.
3. نئون بلب لڳايو: Screw the Sunco B11 Dusk to Dawn LED bulb into the E12 socket until it is finger-tight. Do not overtighten.
4. پاور بحال ڪريو: Turn the power supply back on at the circuit breaker.

The bulb is non-dimmable. Do not use with dimmer switches, as this may cause damage to the bulb or affect its performance.

Image 2.1: Simple Setup. This image illustrates the ease of installing the bulb, emphasizing a quick and hassle-free process.

3. آپريٽنگ هدايتون

The Sunco B11 Dusk to Dawn LED bulb features an integrated photocell sensor that automatically detects ambient light levels. Once installed and powered, the bulb will operate as follows:

• Automatic On: The bulb will automatically illuminate when the ambient light level drops below a certain threshold (at dusk).
• خودڪار بند: The bulb will automatically turn off when sufficient ambient light is detected (at dawn).

No manual switching is required for daily operation. Ensure the photocell sensor on the bulb is not obstructed by the fixture, decorations, or other objects, as this can interfere with its ability to detect light levels accurately.

Image 3.1: Automatic Dusk to Dawn Functionality. This image visually demonstrates how the bulb automatically turns on at night and off during the day, providing continuous outdoor lighting without manual intervention.

4. سار سنڀال

Sunco B11 LED bulbs are designed for long-lasting performance and require minimal maintenance.

• صفائي: To clean the bulb, ensure the power is off and the bulb is cool. Gently wipe with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• چڪاس: Periodically inspect the bulb and fixture for any signs of damage or wear.
• متبادل: While designed for a long lifespan, if the bulb ceases to function, replace it with a new Sunco B11 Dusk to Dawn LED bulb.

5. مسئلا حل ڪرڻ

If you experience issues with your Sunco B11 Dusk to Dawn LED bulb, refer to the following common solutions:

• Bulb does not turn on at dusk:
  • Ensure the power to the fixture is on.
  • Check that the photocell sensor on the bulb is not obstructed by the fixture, eaves, or other objects that might block natural light.
  • Verify the bulb is screwed in securely.
  • Allow up to 24 hours for the sensor to calibrate to its environment after initial installation or power cycling.
• Bulb does not turn off at dawn:
  • Ensure the photocell sensor is not in a shaded area or receiving insufficient light during the day.
  • Check for any external light sources (e.g., another bright light, street light) that might be illuminating the sensor, causing it to remain off.
  • Allow up to 24 hours for the sensor to calibrate.
• Bulb flickers or buzzes:
  • These bulbs are non-dimmable. Ensure they are not connected to a dimmer switch.
  • Verify the bulb is securely seated in the socket.

6. وضاحتون

Image 6.1: Bulb Specifications. This diagram highlights the bulb's dimensions (3.9 inches height, 1.4 inches width) and features such as 500 lumens brightness, 5W wattage, E12 base, 91 CRI, dusk to dawn photocell sensor, and 15,000 hours lifespan.

7. وارنٽي ۽ سپورٽ

سنڪو لائيٽنگ مهيا ڪري ٿي a 5 سال وارنٽي for this product, ensuring quality and performance. For warranty claims, technical assistance, or any questions regarding your Sunco B11 Dusk to Dawn LED bulbs, please contact Sunco Lighting customer support.

رابطي جي ڄاڻ: Please refer to the official Sunco Lighting website or your purchase documentation for the most current customer support contact details.