ANYCUBIC واش اينڊ ڪيور 3.0 اسٽيشن هدايت نامو

1. تعارف

The ANYCUBIC Wash and Cure 3.0 is an upgraded 2-in-1 wash and cure station designed for resin 3D printer models. It features a larger cleaning capacity, innovative gooseneck lights for uniform curing, a dual-layer design for IPA saving, and quiet, simple operation. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.

2. حفاظتي هدايتون

• Always wear protective gloves and eye protection when handling resin or cleaning solutions.
• Ensure adequate ventilation in your workspace to avoid inhaling resin fumes.
• ڊوائيس ٻارن ۽ پالتو جانور کان پري رکو.
• ڊيوائس کي بي نقاب نه ڪريو س directو سورج جي روشني يا تيز گرمي پد تي.
• Use only recommended cleaning solutions (e.g., Isopropyl Alcohol - IPA) and follow their safety guidelines.
• Never operate the curing function without the UV-blocking top cover in place.
• صفائي يا سار سنڀال ڪرڻ کان اڳ بجلي بند ڪريو.

3. دٻي ۾ ڇا آهي

Upon unboxing your ANYCUBIC Wash and Cure 3.0, please verify that all components are present:

• Wash and Cure Machine Unit
• Washing Bucket (4L capacity)
• وئڻ جي ٽوڪري
• Rack Bar (4 pcs)
• Curing Table
• گوزنيڪ لائيٽ
• Hex Key Set
• استعمال ڪندڙ دستي
• پاور اڊاپٽر

شڪل 3.1: All components included in the ANYCUBIC Wash and Cure 3.0 package.

4. سيٽ اپ گائيڊ

1. پيڪ ڪريو: احتياط سان پيڪنگنگ مان سڀني اجزاء کي هٽايو.
2. لڳائڻ: Place the main unit on a stable, level surface in a well-ventilated area.
3. پاور ڪنيڪشن: Connect the power adapter to the unit and then to a power outlet.
4. Gooseneck Light Installation: Insert the gooseneck light into its designated port on the main unit.
5. Washing Bucket Preparation:
   • For washing, place the washing basket inside the washing bucket.
   • Fill the washing bucket with your chosen cleaning solution (e.g., IPA) up to the appropriate level, ensuring it covers the models to be cleaned.
6. Curing Table Preparation: For curing, ensure the curing table is placed on the rotating platform.

5. آپريٽنگ هدايتون

5.1. Washing Mode

1. Prepare Models: Remove printed models from the build plate. For models still on the build plate, use the hanging cleaning mode. For detached models, place them in the washing basket.
2. Place Washing Bucket: Position the washing bucket with the models and cleaning solution onto the main unit's platform. Ensure the UV-blocking cover is in place.
3. ڌوئڻ جو طريقو چونڊيو: Press the "Wash" button on the control panel.
4. مقرر وقت: Use the rotary knob to set the desired washing time (typically 1-30 minutes, refer to resin manufacturer guidelines).
5. ڌوئڻ شروع ڪريو: Press the Start/Stop button to begin the washing cycle. The internal propeller will agitate the cleaning solution.
6. مڪمل ٿيڻ: The machine will beep when the cycle is complete. Carefully remove the models and allow them to dry.

شڪل 5.1: Dual cleaning modes for models on a build plate (hanging) or detached (basket).

5.2. Curing Mode

1. Place Models: After washing and drying, place the models on the curing table.
2. Position Curing Table: Place the curing table with models onto the main unit's rotating platform. Ensure the UV-blocking cover is in place.
3. علاج جو طريقو چونڊيو: Press the "Cure" button on the control panel.
4. مقرر وقت: Use the rotary knob to set the desired curing time (typically 1-30 minutes, refer to resin manufacturer guidelines).
5. Activate Gooseneck Light (Optional): Press the "FlexiCure" button to activate the gooseneck light for targeted curing of complex areas.
6. علاج شروع ڪريو: Press the Start/Stop button to begin the curing cycle. The platform will rotate, and UV lights will activate.
7. مڪمل ٿيڻ: The machine will beep when the cycle is complete. Remove the fully cured models.

شڪل 5.2: The gooseneck light provides localized strengthening and uniform curing for intricate details on 3D models.

6. سار سنڀال

• Cleaning the Washing Bucket: Regularly clean the washing bucket and basket to prevent resin buildup. Dispose of used cleaning solution responsibly according to local regulations.
• يونٽ جي صفائي: Wipe down the exterior of the unit with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• UV Light Maintenance: Keep the UV lights and gooseneck light clean and free of dust or resin residue to ensure optimal curing performance.
• اسٽوريج: When not in use, store the unit in a cool, dry place away from direct sunlight.

7. مسئلا حل ڪرڻ

8. وضاحتون

شڪل 8.1: Detailed comparison of Wash and Cure 3 and Wash and Cure 3 Plus specifications.

9. وارنٽي ۽ سپورٽ

For warranty information, technical support, or service inquiries, please refer to the official ANYCUBIC webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو. وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

توھان جو دورو ڪري سگھو ٿا ANYCUBIC سرڪاري اسٽور وڌيڪ پراڊڪٽس ۽ سپورٽ وسيلن لاءِ.