تعارف
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ikea KALLROR 503.570.02 Stainless Steel Cabinet Handles. Please read these instructions carefully before proceeding with installation to ensure proper and safe use.
پيداوار ختمview
The Ikea KALLROR 503.570.02 handles are designed to offer a modern aesthetic and functional grip for your kitchen cabinets or drawers. This set includes two handles and all necessary screws for a complete installation.
This image displays two sleek, cylindrical stainless steel cabinet handles, along with four silver screws. The handles have a brushed finish, and each handle is shown with two mounting posts. The screws are designed to secure the handles to cabinet doors or drawers.
وضاحتون
| ماڊل نمبر | 503.570.02 |
| برانڊ | Ikea |
| Quantity per set | 2 هٿ |
| هٿ جي ڊگھائي | 213 ملي ميٽر |
| سنڀال جي کوٽائي | 38 ملي ميٽر |
| Hole Spacing (center-to-center) | 160 ملي ميٽر |
| Drilled Hole Diameter | 5 ملي ميٽر |
| مناسب دروازي جي ٿلهي | 16 ملي ميٽر کان 21 ملي ميٽر |
| Handle/End Cap Material | بي داغ لوه |
| Plastic Parts Material | پوليٿيلين پلاسٽڪ |
| شامل اجزاء | Installation Hardware (screws) |
| وزن | 170 گرام |
سيٽ اپ ۽ تنصيب
Installing your Ikea KALLROR cabinet handles is a straightforward process. Follow these steps carefully for a secure attachment.
گهربل اوزار
- سوراخ ڪرڻ
- Drill bit (5 mm diameter)
- ماپڻ وارو ٽيپ يا حڪمران
- پنسل
- اسڪرو ڊرايور (فلپس هيڊ جي سفارش ڪئي وئي آهي)
تنصيب جا مرحلا
- ماپ ۽ نشان: Carefully measure and mark the desired position for the handle on your cabinet door or drawer front. Ensure the marks for the two screw holes are precisely 160 mm apart (center-to-center).
- سوراخ سوراخ: Using a 5 mm drill bit, carefully drill through the cabinet door or drawer front at the marked positions. Ensure the holes are straight and clean.
- منسلڪ پهچ Align the handle with the drilled holes. Insert the provided screws from the inside of the cabinet door or drawer through the drilled holes and into the handle posts.
- محفوظ هٿ: Tighten the screws firmly with a screwdriver until the handle is securely attached. وڌيڪ تنگ نه ڪريو, as this may damage the cabinet material.
- ورجائي: Repeat the process for the second handle if installing a set.
Important: These handles are suitable for door thicknesses between 16 mm and 21 mm. Verify your cabinet door thickness before drilling.
آپريشن
The Ikea KALLROR cabinet handles are designed for simple and reliable operation. Grasp the handle firmly to open or close cabinet doors and drawers as needed.
سار سنڀال
To ensure the longevity and appearance of your stainless steel handles, follow these maintenance guidelines:
- صفائي: Wipe regularly with a soft, damp cloth. For stubborn marks, use a mild detergent solution. Avoid abrasive cleaners, scouring pads, or chemical solvents, as these can damage the stainless steel finish.
- خشڪ ڪرڻ: Always dry the handles thoroughly after cleaning to prevent water spots and maintain their luster.
- چڪاس: Periodically check the screws for tightness. If a handle feels loose, gently tighten the screws with a screwdriver.
مشڪلاتون
Handle is Loose
If the handle feels loose, gently tighten the screws from the inside of the cabinet door or drawer. Ensure not to overtighten.
انسٽال ڪرڻ ۾ ڏکيائي
Ensure the drilled holes are precisely 160 mm apart (center-to-center) and that the drill bit used was 5 mm in diameter. Verify your cabinet door thickness is within the specified 16-21 mm range.
حمايت
For further assistance or inquiries regarding your Ikea KALLROR cabinet handles, please refer to the official Ikea website or contact Ikea customer service directly.
