Mounting Dream MD2617-CA

Mounting Dream UL Listed Full Motion TV Wall Mount (MD2617-CA) Instruction Manual

Model: MD2617-CA

1. اهم حفاظتي ڄاڻ

خبردار: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.

2. پراڊڪٽ ختمview

The Mounting Dream MD2617-CA is a full motion TV wall mount designed for televisions between 42 and 84 inches, weighing up to 100 lbs. It offers extensive adjustability for optimal viewing angles.

Mounting Dream MD2617-CA Full Motion TV Wall Mount

Image: The Mounting Dream MD2617-CA full motion TV wall mount, shown with its articulating arms and a small level tool.

اهم خاصيتون:

Mounting Dream MD2617-CA features

تصوير: تفصيلي view of the mount's features, including Allen key storage, TV locking clips, rubber mat for cushioning, and cable management clips.

3. وضاحتون

ماڊل نمبرMD2617-CA
ٽي وي سائز مطابقت42 - 84 انچ
وزن جي گنجائش100 پائونڊ (45.3 ڪلوگرام)
VESA مطابقتMin: 200x100 mm, Max: 600x400 mm
جھڪندڙ زاويه+5° / -15°
گھمڻ وارو زاويوUp to ±45° (depending on TV size)
ڀت کان واڌ2.5 انچ (واپس ڪڍيو ويو) کان 16.6 انچ (وڌايل)
پوسٽ-انسٽاليشن ليولنگ±4°
وال پليٽ طول و عرض(Refer to specific diagram in packaging for exact dimensions, typically covers 16-inch stud spacing)
موادCold-formed steel
رنگڪارو

4. سيٽ اپ ۽ انسٽاليشن گائيڊ

Before you begin, ensure you have all necessary tools and hardware. A stud finder, drill, level, and measuring tape are typically required. All hardware is provided in pre-labeled bags.

4.1 Compatible Wall Types:

This mount is designed for:

IMPORTANT: DO NOT install this TV mounting bracket on drywall alone.

Compatible wall types for TV mount

Image: Illustrations showing the mount installed on wood stud, concrete, and brick walls, with a warning against drywall-only installation.

4.2 مرحليوار انسٽاليشن:

Follow these general steps. Refer to the detailed paper template and instructions included in your package for precise measurements and hardware selection.

  1. Attach Brackets to TV Back:

    Select the appropriate screws, washers, and spacers for your TV's VESA mounting holes. Secure the two vertical TV brackets to the back of your television. Ensure they are centered and securely fastened.

    Step 1: Attach brackets to TV back

    Image: A three-step installation guide showing attaching brackets to the TV, installing the wall plate, and hanging the TV.

  2. وال پليٽ انسٽال ڪريو:

    Determine the desired height for your TV. Use a stud finder to locate the center of your wood studs. Mark the drill holes using the provided paper template. For concrete/brick walls, mark holes directly. Drill pilot holes as specified in the manual. Secure the wall plate to the wall using the appropriate lag bolts and washers. Use the included level to ensure the wall plate is perfectly horizontal.

  3. ٽي وي کي ڀت جي پليٽ تي لٽڪايو:

    Carefully lift the TV (with brackets attached) and hook the brackets onto the wall plate. Ensure the TV is securely seated. Engage the safety locking clips to prevent accidental dislodgement. Perform any post-installation leveling adjustments as needed.

Concrete Anchors: If installing on concrete, concrete anchors (Anchor Size: φ10x50mm) can be provided upon request from Mounting Dream customer support.

5. آپريٽنگ هدايتون

The MD2617-CA mount offers various adjustments to achieve your preferred viewزاويه.

5.1 Adjusting Tilt:

To adjust the vertical tilt of your TV (from +5° up to -15° down), loosen the tilt adjustment knobs on the TV brackets, position the TV to the desired angle, and then securely tighten the knobs. This helps reduce glare from lights or windows.

TV tilt adjustment range

Image: A TV mounted on the wall, demonstrating the tilt range from +5 degrees up to -15 degrees down.

5.2 Adjusting Swivel and Extension:

The articulating arms allow you to swivel the TV left or right by up to ±45° and extend it up to 16.6 inches from the wall or retract it to 2.5 inches. Gently push or pull the TV to the desired position. The arms are designed for smooth movement.

TV swivel adjustment range

Image: A TV mounted on the wall, demonstrating the swivel range of up to ±45 degrees.

TV extension and retraction

Image: A diagram illustrating the mount's extension capability, extending 16.6 inches and retracting to 2.5 inches from the wall.

5.3 Post-Installation Leveling:

If your TV appears slightly unlevel after installation, you can make a fine adjustment of ±4° without removing the TV from the wall. Consult your specific manual for the exact mechanism, which typically involves loosening specific screws on the TV brackets, adjusting, and re-tightening.

Post-installation TV leveling

Image: A TV mounted on the wall, showing the ability to level the screen by ±4 degrees after initial installation.

6. سار سنڀال

باقاعده سار سنڀال توهان جي ٽي وي وال ماؤنٽ جي ڊگهي عمر ۽ محفوظ آپريشن کي يقيني بڻائي ٿي.

7. مسئلا حل ڪرڻ

If you encounter issues with your Mounting Dream TV wall mount, refer to the following common solutions:

مسئلوممڪن سببحل
انسٽاليشن کان پوءِ ٽي وي ليول نه آهي.Initial installation slightly off; post-installation leveling not adjusted.Use the ±4° post-installation leveling feature. Loosen the specific leveling screws, adjust the TV, and re-tighten.
جبل ڍلو يا لرزندڙ محسوس ٿئي ٿو.Wall plate not securely fastened; fasteners have loosened over time.Immediately remove the TV. Check all lag bolts securing the wall plate to the wall. Ensure they are fully tightened into studs or concrete. If necessary, consult a professional.
ٽي وي ماؤنٽ تي نه ٿو لڳي.Incorrect VESA pattern or TV size/weight.Verify your TV's VESA pattern, size, and weight against the mount's specifications (Min VESA 200x100mm, Max VESA 600x400mm, 42-84 inches, up to 100 lbs).
Difficulty moving articulating arms.Dust or lack of lubrication at pivot points.Clean pivot points and apply a small amount of silicone-based lubricant if needed. Ensure no cables are obstructing movement.

8. وارنٽي ۽ سپورٽ

Mounting Dream products are designed for durability and reliability. This product comes with a warranty (refer to your purchase documentation for specific terms and duration).

For any pre-purchase questions, installation assistance, or support, the Mounting Dream customer service team is available 7 days a week.

لاڳاپيل دستاويز - MD2617-CA

اڳيview Mounting Dream MD2617-24K Full Motion TV Wall Mount Installation Guide
Comprehensive installation guide for the Mounting Dream MD2617-24K full motion TV wall mount. Covers VESA compatibility, weight limits, wall type suitability, step-by-step assembly, and adjustments for TVs 42-70 inches.
اڳيview Mounting Dream MD2296-24K TV Wall Mount Installation Guide
Comprehensive installation instructions for the Mounting Dream MD2296-24K TV wall mount. Covers compatibility checks, required tools, safety precautions, parts list, and step-by-step assembly for wood stud and concrete walls.
اڳيview Mounting Dream MD2617-CA TV Wall Mount Installation Guide
Comprehensive installation instructions for the Mounting Dream MD2617-CA full-motion TV wall mount, covering VESA compatibility, wall mounting (wood studs and concrete), TV attachment, adjustments, and cable management.
اڳيview ماؤنٽنگ ڊريم MD2380 فل موشن ٽي وي ماؤنٽ انسٽاليشن گائيڊ
ماؤنٽنگ ڊريم MD2380 فل موشن ٽي وي ماؤنٽ لاءِ تفصيلي انسٽاليشن هدايتون. VESA مطابقت، وزن جي حد، ڀت جي قسم جي مناسبيت (ڪاٺ جي اسٽڊ، ڪنڪريٽ)، قدم بہ قدم اسيمبلي، ٽي وي اٽيچمينٽ، ۽ ترتيب ڏيڻ جا طريقا شامل آهن. حفاظتي ڊيڄاريندڙ ۽ حصن جي فهرست شامل آهي.
اڳيview Mounting Dream MD2379 TV Wall Mount Installation Guide
Comprehensive installation guide for the Mounting Dream MD2379 TV wall mount, covering compatibility checks, step-by-step assembly, safety precautions, and adjustments for TVs from 26 to 55 inches.
اڳيview Mounting Dream MD2377 TV Wall Mount Installation Guide
Comprehensive installation instructions for the Mounting Dream MD2377 TV wall mount. Learn how to safely and securely attach your TV to the wall with step-by-step guidance, including pre-installation checks, parts identification, and adjustment procedures.