Datavideo RMC-300A Multi-Camera Controller User Manual

1. تعارف

The Datavideo RMC-300A is a versatile multi-functional controller designed for managing multiple cameras in professional video production environments. It offers comprehensive control over PTZ (Pan-Tilt-Zoom) and block cameras, as well as integration with Datavideo recorders and switchers.

This manual provides essential information for setting up, operating, and maintaining your RMC-300A controller to ensure optimal performance and longevity.

2. پراڊڪٽ ختمview

The RMC-300A features a user-friendly interface combining a 5-inch touch panel with dedicated hardware buttons and a joystick for precise control. It supports control of up to 24 cameras via Ethernet (DVIP) or up to 8 cameras via serial RS-422 transmission.

Figure 1: Datavideo RMC-300A Multi-Camera Controller. This image displays the Datavideo RMC-300A controller, featuring a central 5-inch touch screen, a prominent joystick for camera movement, and numerous hardware buttons for functions like camera selection, recording, focus, iris, and gain control. The device has an ergonomic design with a dark gray finish.

اهم خاصيتون:

• Control up to 24 PTZ and block cameras via Ethernet (DVIP).
• Control up to 8 cameras via serial RS-422 transmission.
• Integrated 5-inch touch panel for intuitive control.
• Hardware buttons for quick access to common functions.
• Joystick for precise pan, tilt, and zoom control.
• Compatibility with Datavideo recorders and switchers.

3. سيٽ اپ

3.1 پيڪنگ ۽ چڪاس

1. Carefully remove the RMC-300A from its packaging.
2. Inspect the unit for any signs of damage during transit. Contact your dealer immediately if any damage is found.
3. Verify that all accessories listed in the packing list are present.

3.2 پاور ڪنيڪشن

• Connect the provided power adapter to the RMC-300A's power input port.
• پاور اڊاپٽر کي مناسب برقي آئوٽليٽ ۾ لڳايو.

3.3 Camera and Device Connections

The RMC-300A supports two primary connection methods for cameras:

• Ethernet (DVIP): For controlling up to 24 PTZ and block cameras. Connect the RMC-300A to your network switch, and ensure all DVIP-compatible cameras are also connected to the same network.
• سيريل (RS-422): For controlling up to 8 cameras. Connect the RS-422 cable from the RMC-300A to the serial control port of your cameras.

For controlling Datavideo recorders and switchers, refer to their respective manuals for connection details and ensure they are properly integrated with the RMC-300A via network or serial connections as applicable.

4. آپريٽنگ هدايتون

The RMC-300A offers a combination of touch screen and physical button controls for efficient operation.

4.1 پاور آن ۽ شروعاتي سيٽ اپ

1. Press the power button (if available, otherwise assume automatic power-on upon connection).
2. The 5-inch touch panel will display the main interface.
3. Navigate to the system settings on the touch panel to configure network settings, camera discovery, and initial parameters.

4.2 ڪئميرا سنڀال

Use the touch panel to select the desired camera from the "Camera" tab. Once a camera is selected, you can use the joystick and dedicated buttons for control.

• جوهي اسٽيڪ Move the joystick to control camera pan and tilt. Rotate the joystick head for zoom in/out.
• فوڪس ڪنٽرول: Use the "FOCUS" button and associated dial/knob to adjust camera focus. The "AUTO FOCUS" button enables automatic focus.
• Iris ڪنٽرول: Use the "IRIS" button and associated dial/knob to adjust the camera's aperture. The "AUTO IRIS" button enables automatic iris control.
• گينڊي ڪنٽرول: Use the "GAIN" button and associated dial/knob to adjust the camera's gain.
• شٽر ڪنٽرول: Use the "SHUTTER" button and associated dial/knob to adjust the camera's shutter speed.
• White Balance (AWB): Press the "AWB" button for automatic white balance adjustment.
• رفتار ڪنٽرول: Buttons labeled "FAST", "MOD" (Moderate), and "SLOW" adjust the speed of pan/tilt/zoom movements.

4.3 اڳواٽ انتظام

The RMC-300A allows you to save and recall camera position presets.

• اڳواٽ محفوظ ڪرڻ: ڪئميرا کي گهربل جاءِ تي رکو view using the joystick and control buttons. On the touch panel, navigate to the "Preset" section and select an empty preset slot to save the current position.
• وري يادگار سيٽون: Select the desired camera, then tap on the saved preset number on the touch panel or use the dedicated preset recall buttons (e.g., 1/13, 2/14, etc.) to move the camera to the stored position.
• Preset Shift: Use the "Preset Shift" function on the touch panel to access additional preset banks if available.

4.4 Recorder and Switcher Control

The RMC-300A can integrate with Datavideo recorders and switchers. Use the "Recorder" and "Switcher" tabs on the 5-inch touch panel to access their respective controls.

• رڪارڊر جا ڪم: Use the "REC" button to start recording and "STOP" button to end recording on connected Datavideo recorders. Additional controls may be available via the touch panel.
• Switcher Functions: The "Switcher" tab provides controls for connected Datavideo switchers, allowing for program and preview selection, transitions (e.g., "CUT", "MIX"), and other switching operations.

5. سار سنڀال

5.1 صفائي

• Ensure the unit is powered off and disconnected from the power source before cleaning.
• Use a soft, dry cloth to wipe the exterior of the controller.
• ضد واري مٽي لاء، روشني سان ڊيampen the cloth with water or a mild, non-abrasive cleaning solution. Avoid harsh chemicals.
• Clean the touch screen with a microfiber cloth specifically designed for electronic displays.

5.2 اسٽوريج

• Store the RMC-300A in a cool, dry place away from direct sunlight and extreme temperatures.
• If storing for an extended period, disconnect all cables and place the unit in its original packaging or a protective case.

6. مسئلا حل ڪرڻ

6.1 پاور ناهي

• Check if the power adapter is securely connected to both the RMC-300A and the power outlet.
• ٻئي ڊوائيس ۾ پلگ ان ڪندي تصديق ڪريو ته پاور آئوٽليٽ ڪم ڪري رهيو آهي.
• Ensure the power adapter is the correct one supplied with the unit.

6.2 Camera Not Responding

• Confirm that the camera is properly connected to the RMC-300A via Ethernet or RS-422.
• For Ethernet connections, check network cables and ensure the camera and controller are on the same network segment and have compatible IP addresses.
• For RS-422 connections, verify cable integrity and correct wiring (Tx/Rx, Ground).
• Ensure the correct camera is selected on the RMC-300A's touch panel.
• Check the camera's own settings to ensure it is configured for external control.

6.3 Touch Panel Unresponsive

• Try restarting the RMC-300A by disconnecting and reconnecting the power.
• پڪ ڪريو ته اسڪرين صاف ۽ ملبي کان پاڪ آهي.

If problems persist, refer to the official Datavideo support resources or contact customer service.

7. وضاحتون

8. وارنٽي ۽ سپورٽ

8.1 وارنٽي ڄاڻ

Datavideo products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period and terms for your RMC-300A, please refer to the warranty card included with your product or visit the official Datavideo webسائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

8.2 ٽيڪنيڪل سپورٽ

For technical assistance, software updates, or further inquiries, please visit the official Datavideo support website or contact their customer service department. Contact information can usually be found on the Datavideo webسائيٽ يا پيداوار جي پيڪنگنگ ۾.

Datavideo Official Webسائيٽ: www.datavideo.com