ADTRAN NetVanta 1560-08-150W 12-پورٽ منظم پرت 2/3 گيگابٽ ايٿرنيٽ سوئچ يوزر مينوئل

1. تعارف

This manual provides comprehensive instructions for the installation, operation, and maintenance of the ADTRAN NetVanta 1560-08-150W 12-Port Managed Layer 2/3 Gigabit Ethernet Switch. The NetVanta 1560 series is designed for enterprise networks requiring high-performance, reliable, and scalable switching solutions with advanced multi-layer capabilities and Power over Ethernet Plus (PoE+) support.

Key features include Layer 2/3 switching, Gigabit Ethernet ports, SFP/SFP+ uplink ports, PoE/PoE+ power delivery, and robust management options via Web GUI, CLI, and SNMP.

2. حفاظت جي ڄاڻ

• برقي حفاظت: پڪ ڪريو ته طاقت جو ذريعو وال سان ملندو آهيtage requirements of the switch (240 Volts). Use only the provided power cord or an approved replacement. Do not operate the device with a damaged power cord or plug.
• وينٽيليشن: Maintain adequate airflow around the switch to prevent overheating. Do not block ventilation openings.
• ماحول: Install the switch in a dry, well-ventilated area, away from direct sunlight, heat sources, and excessive dust or moisture.
• گرائونڊنگ: Ensure the device is properly grounded to prevent electrical shock.
• خدمت ڪرڻ: Refer all servicing to qualified service personnel. Do not attempt to open or repair the device yourself.

3. سيٽ اپ ۽ تنصيب

3.1 کولڻ

Carefully unpack the switch and verify that all components are present. Retain the packaging materials for future transport or storage.

3.2 جسماني تنصيب

The NetVanta 1560-08-150W switch can be installed in a desktop, wall-mount, or rack-mount configuration. Ensure the chosen location provides adequate ventilation and access to power and network cabling.

• ڊيسڪ: سوئچ کي فليٽ، مستحڪم سطح تي رکو.
• Wall-mount/Rack-mount: Use the appropriate mounting hardware (sold separately) and follow the instructions provided with the kit.

3.3 ڳنڍڻ واري طاقت

1. Connect the power cord to the power inlet on the rear panel of the switch.
2. پاور ڪنڊ جي ٻئي پڇاڙيءَ کي گرائونڊ ٿيل برقي آئوٽليٽ ۾ لڳايو.
3. The switch will power on automatically. Observe the System LED on the front panel.

3.4 نيٽ ورڪ ڪيبل ڳنڍڻ

Connect Ethernet devices (computers, servers, access points) to the 10/100/1000Base-T access ports using standard RJ-45 Ethernet cables. For uplink connections to other network devices, use the SFP/RJ45 combo 1GigE uplink ports.

شڪل 1: Front panel of the ADTRAN NetVanta 1560-08-150W switch. This image displays the front panel of the ADTRAN NetVanta 1560-08-150W switch. It features 8 Gigabit Ethernet ports, 2 SFP/RJ45 combo uplink ports, a console port, a micro USB port, and LED indicators for system status, link/activity/speed, and PoE.

3.5 شروعاتي ترتيب جي رسائي

The switch can be configured via the Command Line Interface (CLI) using the console port or through the Web-based Graphical User Interface (GUI).

• CLI رسائي: Connect a console cable from your computer to the switch's console port. Use a terminal emulation program (e.g., PuTTY) with appropriate settings (typically 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control).
• Web GUI رسائي: Connect a computer to any Ethernet port on the switch. The switch will typically obtain an IP address via DHCP or use a default IP address. Refer to the ADTRAN documentation for the default IP address and login credentials.

4. آپريٽنگ هدايتون

4.1 پاور آن/آف

Once connected to power, the switch will automatically power on. To power off, disconnect the power cord. There is no dedicated power button.

4.2 LED اشارا

فرنٽ پينل ايل اي ڊي اسٽيٽس جي معلومات فراهم ڪن ٿا:

• سسٽم ايل اي ڊي: Indicates overall system status (e.g., solid green for normal operation).
• LINK/ACT/SPD LEDs (per port): Indicate link status, activity, and speed for each Ethernet port.
• PoE LED (per port): Indicates Power over Ethernet status for ports supporting PoE/PoE+.

4.3 مئنيجمينٽ انٽرفيس

• ڪمانڊ لائن انٽرفيس (CLI): Provides full control over the switch's features. Accessible via the console port (RJ-45) or SSH.
• Web گرافڪ يوزر انٽرفيس (GUI): Offers an intuitive web-based interface for configuration and monitoring. Accessible via a web برائوزر.
• SNMP: Supports network management systems for monitoring and configuration.

4.4 اهم خاصيتون

• VLANs (802.1Q): Segment network traffic for improved security and performance.
• خدمت جو معيار (QoS): Prioritize critical traffic like Voice over IP (VoIP) for optimal performance.
• Link Aggregation (802.3ad LACP): بينڊوڊٿ ۽ ريڊنڊنسي وڌائڻ لاءِ ڪيترن ئي جسماني لنڪس کي هڪ منطقي لنڪ ۾ گڏ ڪريو.
• Spanning Tree Protocol (STP, RSTP): Prevent network loops and provide path redundancy.
• IGMP اسنوپنگ: Optimize multicast traffic delivery.
• ايٿرنيٽ تي پاور (PoE/PoE+): Deliver power to compatible devices (e.g., IP phones, wireless access points) directly over Ethernet cables. The switch provides up to 30 watts per port, with a maximum of 150 watts for the entire switch.

5. سار سنڀال

5.1 فرم ویئر تازه ڪاريون

Periodically check the ADTRAN support website for the latest firmware updates. Keeping the firmware current ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware update package carefully.

5.2 صفائي

To clean the exterior of the switch, use a soft, dry cloth. Do not use liquid or aerosol cleaners, as they may damage the device. Ensure ventilation openings remain clear of dust and debris.

5.3 ماحولياتي خيالات

Ensure the operating environment remains within specified temperature and humidity ranges to prevent damage and ensure reliable operation.

6. مسئلا حل ڪرڻ

This section addresses common issues you might encounter with the ADTRAN NetVanta 1560-08-150W switch.

6.1 پاور ناهي

• Verify the power cord is securely connected to both the switch and a working electrical outlet.
• پاور آئوٽليٽ کي ٻئي ڊوائيس سان چيڪ ڪريو ته جيئن پڪ ڪري سگهجي ته اهو ڪم ڪري رهيو آهي.
• Ensure the System LED on the front panel is illuminated.

6.2 پورٽ تي ڪابه لنڪ ناهي

• Check the Ethernet cable connection at both ends (switch port and connected device).
• پڪ ڪريو ته ڳنڍيل ڊوائيس آن آهي ۽ صحيح طريقي سان ڪم ڪري رهيو آهي.
• Try a different Ethernet cable or switch port.
• Verify the Link/Act/SPD LED for the specific port.

6.3 نيٽ ورڪ ڪنيڪٽيويٽي جا مسئلا

• Confirm IP address settings on the switch and connected devices.
• Check VLAN configurations if network segmentation is in use.
• Verify gateway and DNS settings.
• Consult the ADTRAN documentation for advanced diagnostics.

6.4 سوئچ کي ري سيٽ ڪرڻ

The switch may have a reset button (often recessed) on the front or rear panel. Refer to the device's specific documentation for instructions on performing a factory reset, as this will erase all configurations.

7. وضاحتون

8. وارنٽي ۽ سپورٽ

For detailed warranty information and technical support, please refer to the official ADTRAN website or contact ADTRAN customer service. Keep your purchase receipt for warranty claims.

داخل ڪريو Webسائيٽ: www.adtran.com