آڊيو-ٽيڪنيڪا AT-PEQ30 فونو ايڪوئلائيزر هدايت نامو

1. تعارف

The Audio-Technica AT-PEQ30 is a high-quality phono equalizer designed to allow turntables to connect to audio systems that lack a dedicated PHONO input. It supports turntables equipped with VM (Dual Magnet), MM (Moving Magnet), and MC (Moving Coil) type cartridges, providing optimal signal amplification and RIAA equalization for accurate vinyl playback. This manual provides essential information for proper setup, operation, and maintenance of your AT-PEQ30.

تصوير 1.1: سامهون view of the Audio-Technica AT-PEQ30 Phono Equalizer, showcasinان جي سهڻي ڊيزائن ۽ فرنٽ پينل ڪنٽرولز جي ڪري.

2. پيڪيج مواد

Before proceeding with the setup, please ensure all items are present in the package:

• Audio-Technica AT-PEQ30 Phono Equalizer Unit
• AC اڊاپٽر

3. سيٽ اپ جون هدايتون

Follow these steps to correctly connect your AT-PEQ30 Phono Equalizer to your audio system.

3.1. Connecting the Turntable

1. آر سي اي آئوٽ پُٽ ڪيبلز کي پنهنجي ٽرن ٽيبل مان ڳنڍيو INPUT (R/L) jacks on the rear panel of the AT-PEQ30. Ensure the red plug connects to the 'R' (right) input and the white/black plug connects to the 'L' (left) input.
2. Connect the ground wire from your turntable to the جي اين ڊي terminal on the AT-PEQ30. This helps reduce hum and noise.

Image 3.1: Rear panel of the AT-PEQ30, showing the INPUT (R/L), GND, OUTPUT (R/L), and DC IN 15V connections.

3.2. هڪ سان ڳنڍڻ Ampزنده/وصول ڪندڙ

1. Connect RCA cables from the اوٽ پٽ (آر/ايل) jacks on the rear panel of the AT-PEQ30 to an available line-level input (e.g., AUX, CD, LINE) on your ampلائفيئر يا فعال ڳالهائيندڙ. Do not connect to a PHONO input on your amplifier, as this will result in over-equalization and distorted sound.

3.3. پاور ڪنيڪشن

1. Connect the supplied AC adapter to the ڊي سي 15 وي ۾ jack on the rear panel of the AT-PEQ30.
2. AC اڊاپٽر کي معياري وال آئوٽليٽ ۾ لڳايو.

4. آپريٽنگ هدايتون

Once connected, operating the AT-PEQ30 is straightforward.

4.1. پاور آن/آف

کي دٻايو پاور بٽڻ on the front panel to turn the unit on or off. A small indicator light will illuminate when the unit is powered on.

4.2. MM/MC Cartridge Selection

The AT-PEQ30 features a switch to select between Moving Magnet (MM) and Moving Coil (MC) cartridge types. This selection is crucial for proper gain and impedance matching.

• MM (حرڪتي مقناطيس): Select this setting for turntables equipped with MM or VM (Dual Magnet) cartridges.
• ايم سي (هلندڙ ڪوئل): Select this setting for turntables equipped with MC cartridges.

To switch between MM and MC modes, use the dedicated ايم ايم/ايم سي سوئچ سامهون پينل تي واقع.

تصوير 4.1: ويجهو تصوير view of the MM/MC selector switch on the front panel, highlighted to show its position.

Always ensure the correct cartridge type is selected to achieve optimal sound quality and prevent potential damage to your equipment.

5. سار سنڀال

Proper care will ensure the longevity and performance of your AT-PEQ30 Phono Equalizer.

• صفائي: Use a soft, dry cloth to wipe the exterior of the unit. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
• جڳت: Place the unit on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the unit.
• Noise Resistance: The AT-PEQ30 features a metal enclosure designed to provide excellent noise resistance. Keep the unit away from other electronic devices that may cause interference.

6. مسئلا حل ڪرڻ

If you encounter issues with your AT-PEQ30, refer to the following common problems and solutions:

7. وضاحتون

Detailed technical specifications for the Audio-Technica AT-PEQ30 Phono Equalizer.

Image 7.1: Diagram illustrating the approximate dimensions of the AT-PEQ30 unit.

8. وارنٽي ۽ سپورٽ

For warranty information and technical support, please refer to the official Audio-Technica webسائيٽ تي وڃو يا انهن جي ڪسٽمر سروس ڊپارٽمينٽ سان رابطو ڪريو. وارنٽي دعوائن لاءِ پنهنجي خريداري جي رسيد رکو.

توهان وڌيڪ معلومات ۽ سپورٽ وسيلا ڳولي سگهو ٿا Audio-Technica Store on Amazon.