فينٽيڪ 98506 پرو پلس ايگزاسٽ فين يوزر مينوئل

تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of your Fantech 98506 PRO Plus Exhaust Fan. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The Fantech 98506 PRO Plus is a high-performance exhaust fan designed for quiet and energy-efficient ventilation in bathrooms, powder rooms, and other areas up to 130 sq. ft. It features advanced motion and humidity sensors, a built-in backdraft damper, and a high-efficiency motor.

حفاظت جي ڄاڻ

خبردار:

• يونٽ جي سروسنگ يا صفائي ڪرڻ کان اڳ هميشه بجلي بند ڪريو.
• تنصيب سڀني مقامي ۽ قومي اليڪٽريڪل ڪوڊن جي مطابق هڪ قابل اليڪٽريشن طرفان ڪئي وڃي.
• ھن فين کي ڪنھن به سولڊ اسٽيٽ اسپيڊ ڪنٽرول ڊيوائس سان استعمال نه ڪريو.
• برقي جھٽڪو جي خطري کي گھٽائڻ لاءِ مناسب گرائونڊنگ کي يقيني بڻايو وڃي.
• This fan is for general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:

• Fantech 98506 PRO Plus Exhaust Fan unit
• Sensor Grille
• Adjustable 12-24" Bar Hanger
• Installation Hardware (e.g., screws, wire nuts)

If any parts are missing or damaged, contact Fantech customer support immediately.

سيٽ اپ ۽ تنصيب

The Fantech 98506 PRO Plus is designed for surface mount installation and uses a 6-inch flexible duct.

قبل از انسٽاليشن چيڪ لسٽ:

• پڪ ڪريو ته انسٽاليشن جو علائقو صاف ۽ رسائي لائق آهي.
• Confirm power supply is 120 Volts AC.
• Gather necessary tools: screwdriver, wire strippers, drill, measuring tape, utility knife, safety glasses, gloves.
• Verify ductwork is ready for a 6-inch connection.

تنصيب جا مرحلا:

1. افتتاح تيار ڪريو: Create an appropriate opening in the ceiling or wall for the fan housing. Refer to the fan's specific dimensions provided in the installation guide that accompanies the product.
2. هائوسنگ کي لڳايو: Use the adjustable 12-24" bar hangers to securely mount the fan housing between joists or studs. Ensure the housing is level.
3. ڊڪٽ ورڪ ڳنڍيو: Attach the 6-inch flexible duct to the fan's duct collar. Secure with a duct clamp (not included). Ensure the duct run is as straight and short as possible for optimal performance.
4. برقي وائرنگ:
   • Turn off power at the circuit breaker before wiring.
   • Remove the electrical access plate on the fan housing.
   • Connect the household wiring to the fan's wiring according to the wiring diagram provided with the unit (typically black to black, white to white, green/bare to ground).
   • سڀني ڪنيڪشن کي تار نٽ سان محفوظ ڪريو.
   • Replace the electrical access plate.
5. گرل انسٽال ڪريو: Once the fan housing and wiring are complete, attach the sensor grille to the fan housing. The grille typically snaps into place or is secured with small screws.

Image: The Fantech 98506 PRO Plus Exhaust Fan showing the main unit, duct connection, and the white sensor grille. This view illustrates the components involved in the surface mount installation.

آپريٽنگ هدايتون

The Fantech 98506 PRO Plus Exhaust Fan is designed for automatic and manual operation, featuring integrated motion and humidity sensors.

ايئر فلو سيٽنگون:

The fan offers four adjustable airflow settings: 80, 90, 110, and 140 cubic feet per minute (cfm). These settings are typically adjusted via a switch or dial located on the fan unit or sensor grille. Consult the specific wiring diagram for details on how to select the desired CFM setting during installation or initial setup.

سينسر آپريشن:

• موشن سينسر: The fan will activate automatically when motion is detected in the room. It will continue to run for a set period after motion ceases (this duration is often adjustable, refer to specific sensor instructions).
• نمي سينسر: The fan will activate automatically when the humidity level in the room exceeds a pre-set threshold. It will continue to run until the humidity level drops below the threshold. The sensitivity of the humidity sensor may be adjustable.

For optimal performance, ensure the sensors are not obstructed and are positioned to effectively monitor the room conditions.

سار سنڀال

Regular maintenance ensures the longevity and efficient operation of your Fantech exhaust fan.

Cleaning the Grille and Fan Blades:

1. بجلي بند ڪريو: Always turn off power to the fan at the circuit breaker before cleaning.
2. Grille هٽايو: Carefully remove the sensor grille from the fan housing.
3. صاف گرل: Wash the grille with mild soap and water. Rinse thoroughly and allow to dry completely before reinstallation.
4. پنکڙي جي بليڊن کي صاف ڪريو: Use a soft cloth or brush to gently wipe dust and debris from the fan blades and interior of the housing. A vacuum cleaner with a brush attachment can also be used. Do not use abrasive cleaners or solvents.
5. گرل ٻيهر انسٽال ڪريو: Once clean and dry, reattach the grille to the fan housing.
6. پاور بحال ڪريو: سرڪٽ بريڪر تي بجلي کي واپس ڪريو.

Frequency: Clean the grille and fan blades at least once every six months, or more frequently in dusty environments.

مشڪلاتون

عام مسئلن ۽ انهن جي حل لاءِ هيٺ ڏنل جدول جو حوالو ڏيو.

If the problem persists after attempting these solutions, please contact Fantech customer support.

وضاحتون

وارنٽي ڄاڻ

Fantech products are manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fantech webسائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

ڪسٽمر سپورٽ

For technical assistance, replacement parts, or warranty inquiries, please contact Fantech customer support:

• Webسائيٽ: www.fantech.net
• فون: Refer to the contact information on the Fantech webسائيٽ يا پراڊڪٽ پيڪنگنگ.

سپورٽ سان رابطو ڪرڻ وقت، مھرباني ڪري پنھنجو ماڊل نمبر (98506) ۽ خريداري جي تاريخ موجود رکو.