دستور+

JIARUIXIN JR1858RXS

JIARUIXIN JR1858RXS 2.4G بلوٽوٿ ريموٽ ڪنٽرول ۽ رسيور ڪِٽ يوزر مينوئل

Model: JR1858RXS

تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of the JIARUIXIN JR1858RXS 2.4G Bluetooth Remote Control and Receiver Kit. This kit is designed as a replacement part for children's electric ride-on cars. Please read this manual thoroughly before use to ensure proper function and safety.

پيڪيج مواد

  • 1 x JR1858RXS Control Box
  • 1 x 2.4G بلوٽوٿ ريموٽ ڪنٽرول

مطابقت جي چڪاس

Before installation, it is crucial to verify that this control box is compatible with your child's electric ride-on car. To do this:

  1. Open the existing control box compartment on your electric ride-on car.
  2. Compare the appearance and connector type of your original control box with the JR1858RXS control box shown in this manual.
  3. Ensure the original control box is also a 5-pin type, as indicated by the "5P" designation for this model.
JR1858RXS Control Box with 5-pin connector highlighted

Image: JR1858RXS Control Box. This image displays the JR1858RXS control box, highlighting the 5-pin connector for compatibility verification with existing ride-on car systems.

سيٽ اپ ۽ تنصيب

ريموٽ ڪنٽرول بيٽريون لائڻ

The remote control requires two AAA (1.5V) batteries (not included). Follow these steps to install them:

  1. ريموٽ ڪنٽرول جي پٺي تي بيٽري جي خاني کي ڳوليو.
  2. بيٽري جي ڍڪ کي محفوظ ڪرڻ واري اسڪرو کي کولڻ لاءِ اسڪرو ڊرايور استعمال ڪريو.
  3. ٻه AAA بيٽريون داخل ڪريو، صحيح پولارٽي (+/-) کي يقيني بڻائي.
  4. بيٽري جي coverڪ کي ريپ ڪريو ۽ اسڪرو تنگ ڪيو.
Remote control battery installation diagram

Image: Remote Control Battery Installation. This diagram illustrates how to open the battery compartment, insert two AAA batteries, and secure the cover on the remote control unit.

ڪنٽرول باڪس جي انسٽاليشن

Replace the old control box with the new JR1858RXS control box. Ensure all connections are secure and match the original wiring configuration.

آپريٽنگ هدايتون

Pairing the Remote Control (Frequency Matching)

The remote control must be paired with the control box for the first use or after replacing the remote control batteries. Follow these steps:

  1. Ensure the remote controller has two AAA batteries installed.
  2. Turn off the power switch on the electric ride-on vehicle.
  3. On the remote control, hold down the "▲" (Forward) and "▼" (Backward) keys simultaneously for 3 seconds to initiate the pairing process. The red indicator light on the remote will begin to flicker.
  4. While the remote's indicator light is flickering, turn on the power switch on the electric ride-on vehicle.
  5. The red indicator light on the remote control will stop flickering, indicating that the pairing (code matching) was successful.
JR1858RXS Control Box and Remote Control

Image: JR1858RXS Control Box and Remote Control. This image shows both the JR1858RXS control box and the accompanying 2.4G Bluetooth remote control, ready for pairing and operation.

ريموٽ ڪنٽرول افعال

  • "S" Key: رفتار جي ترتيب.
    • 1 LED lit: Low speed
    • 2 LEDs lit: Medium speed
    • 3 LEDs lit: High speed
  • "▲" Key: Forward movement.
  • "▼" Key: Backward movement.
  • "◀" Key: Turn Left.
  • "▶" Key: Turn Right.
  • "P" Key: Brake. Hold this key to apply the brake. All LED indicators will flicker when the brake is engaged.

سار سنڀال

  • ڪنٽرول باڪس ۽ ريموٽ ڪنٽرول کي سڪل ۽ صاف رکو.
  • اجزاء کي انتهائي گرمي پد يا سڌي سج جي روشني ۾ ظاهر ڪرڻ کان پاسو ڪريو.
  • Regularly check battery compartments for corrosion. Remove batteries if the remote control will not be used for an extended period.
  • پڪ ڪريو ته سڀئي برقي ڪنيڪشن محفوظ رهن.

مشڪلاتون

مسئلوممڪن سببحل
ريموٽ ڪنٽرول جواب نه ڏئي رهيو آهي.
  • Low or dead batteries in remote.
  • Remote not paired with control box.
  • ٻين 2.4G ڊوائيسز کان مداخلت.
  • ريموٽ ڪنٽرول بيٽرين کي تبديل ڪريو.
  • Perform frequency matching (pairing) as described in "Operating Instructions".
  • Move away from other 2.4G devices.
Vehicle does not move or moves erratically.
  • Loose connection to control box.
  • Control box malfunction.
  • گاڏي جي بيٽري گهٽ آهي.
  • Check all wiring connections to the control box.
  • Ensure the control box is correctly installed.
  • Charge the ride-on car's main battery.

وضاحتون

  • ماڊل: JR1858RXS
  • جلدtage: ڊي سي 12V
  • موجوده لوڊ ڪريو وڌ ۾ وڌ 20A
  • ڪنٽرول جو طريقو: 2.4G بلوٽوت
  • تعدد: 2.405GHz - 2.485GHz
  • ريموٽ ڪنٽرول بيٽريون: 2 x AAA 1.5V (شامل نه آهي)
  • پيداوار جي ماپ: 4.6 x 2.9 x 1.9 انچ (ڪنٽرول باڪس)
  • شيء جو وزن: 6.4 ounces (Control Box)
  • ٺاهيندڙ: جيئروڪسين

اهم حفاظتي ڄاڻ

  • This product is a replacement part and should be installed by an adult or under adult supervision.
  • Ensure the electric ride-on car is turned off and disconnected from its power source before installing or replacing components.
  • هميشه صحيح وول استعمال ڪريوtage and current ratings as specified for your ride-on car.
  • Keep small parts and batteries out of reach of young children to prevent choking hazards.
  • Do not modify the control box or remote control. Unauthorized modifications can lead to malfunction or injury.
Documents - JIARUIXIN – JR1858RXS

ڪوبه لاڳاپيل دستاويز نه آهي