فينگ ED-S48102WE اليڪٽرڪ اسٽينڊنگ ڊيسڪ يوزر مينوئل

1. تعارف

Thank you for choosing the Fenge ED-S48102WE Electric Standing Desk. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your new desk. Designed to enhance your workspace ergonomics and productivity, this desk features electric height adjustment, memory presets, and an anti-collision system. Please read this manual thoroughly before assembly and use to ensure safe and optimal performance.

Image 1.1: The Fenge ED-S48102WE Electric Standing Desk, showcasing ان جي سهڻي ڊيزائن ۽ مربوط ڪنٽرول پينل سان.

Image 1.2: Illustrates the versatility of the Fenge standing desk, allowing users to switch between sitting and standing positions for improved well-being.

2. حفاظت جي ڄاڻ

• پڪ ڪريو ته سڀئي اجزاء استعمال ڪرڻ کان اڳ محفوظ طور تي تيز آهن.
• Do not overload the desk. The maximum weight capacity is 80 kg (176.3 lbs).
• آپريشن دوران ٻارن ۽ پالتو جانورن کي ڊيسڪ کان پري رکو.
• Ensure there are no obstructions in the desk's path during height adjustment to prevent damage or injury. The anti-collision feature will stop movement if an obstruction is detected.
• صرف مهيا ڪيل پاور اڊاپٽر استعمال ڪريو.
• ڊيسڪ جي بجلي جي حصن کي ڌار نه ڪريو يا تبديل نه ڪريو. خدمت لاءِ ڪسٽمر سپورٽ سان رابطو ڪريو.

3. پيڪيج مواد

Please verify that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact Fenge customer support.

• Desk Top (1 piece, 110x60cm, 16mm thick)
• Desk Legs/Frame (2 pieces)
• Control Panel with Memory Function
• پاور اڊاپٽر ۽ ڪيبلز
• Reinforcement Pipe
• Height Adjustment Feet (Adjusters)
• اسيمبلي هارڊويئر (اسڪرو، ايلن رنچ، وغيره)
• ھدايت وارو دستور

4. اسيمبليءَ جون هدايتون

Follow these steps carefully to assemble your Fenge Electric Standing Desk. It is recommended to have two people for assembly.

1. انپيڪ اجزاء: پيڪنگ مان سڀني حصن کي احتياط سان هٽايو ۽ انهن کي صاف، نرم مٿاڇري تي رکو ته جيئن ڇڪڻ کان بچي سگهجي.
2. ڊيسڪ ٽنگون ڳنڍيو: Secure the desk legs to the underside of the desk top using the provided screws. Ensure they are aligned correctly.
3. Install Reinforcement Pipe: Attach the reinforcement pipe between the two desk legs. This enhances stability.
   

   Image 4.1: The reinforcement pipe provides additional stability to the desk frame.

4. ڪنٽرول پينل ڳنڍيو: Mount the control panel to the underside of the desk top in an easily accessible location.
5. پاور ۽ ڪنٽرول ڪيبل ڳنڍيو: Connect the motor cables from the legs to the control box, and then connect the control panel cable to the control box. Finally, connect the power adapter to the control box and plug it into a power outlet.
   

   Image 4.2: Proper cable management under the desk ensures a tidy and safe setup.
6. Install Height Adjustment Feet: Screw the adjustable feet into the bottom of the desk legs. These can be adjusted to level the desk on uneven surfaces.
   

   Image 4.3: Adjustable feet allow for leveling the desk and ensuring stability.

7. Initial Power-On and Reset: After connecting all cables, plug in the desk. Perform an initial reset by pressing and holding the 'Down' button until the desk reaches its lowest position and then slightly rises. This calibrates the desk.

5. آپريٽنگ هدايتون

5.1. ڪنٽرول پينل اوورview

Image 5.1: The control panel features up/down arrows, memory presets (1-4), and a 'Set' button.

• Up (▲) / Down (▼) Buttons: Press and hold to adjust the desk height manually. Release to stop.
• ياداشت جا اڳواٽ سيٽ (1، 2، 3، 4): Store and recall up to four preferred height settings.
• 'S' (Set) Button: Used to save a desired height into a memory preset.

5.2. Adjusting Desk Height

• دستي ترتيب: Press and hold the Up (▲) or Down (▼) button until the desk reaches your desired height.
• ميموري پري سيٽ استعمال ڪندي: Press the corresponding memory button (1, 2, 3, or 4) to automatically move the desk to the saved height.

5.3. ميموري پري سيٽس سيٽ ڪرڻ

1. Adjust the desk to your desired height using the Up (▲) or Down (▼) buttons.
2. Press the 'S' (Set) button. The display will show 'S'.
3. Within 3 seconds, press one of the memory buttons (1, 2, 3, or 4). The current height will be saved to that preset.

5.4. ٽڪراءُ مخالف نظام

The Fenge ED-S48102WE desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly (2-3 cm) to prevent damage. Ensure the area around the desk is clear before operation, but this feature provides an extra layer of safety.

6. سار سنڀال

• صفائي: ڊيسڪ جي مٿاڇري ۽ فريم کي نرم، ڊي سان صاف ڪريوamp ڪپڙو. گھڙڻ وارا صاف ڪندڙ يا سخت ڪيميڪلز کان پاسو ڪريو.
• چڪاس: وقتي طور تي سڀني پيچرن ۽ ڪنيڪشنن کي چيڪ ڪريو ته جيئن پڪ ٿئي ته اهي تنگ آهن.
• ڪيبل جو انتظام: Ensure cables are neatly organized and not pinched or tangled, especially during height adjustments.

7. مسئلا حل ڪرڻ

8. وضاحتون

Image 8.1: Detailed dimensions and height adjustment range of the Fenge ED-S48102WE desk.

9. وارنٽي ۽ سپورٽ

This Fenge product comes with a 12-مهيني وارنٽي from the date of purchase. In case of initial defects or issues during the warranty period, please contact Fenge customer support for assistance with returns or exchanges.

For further inquiries or technical support, please refer to the contact information provided with your purchase or visit the official Fenge webسائيٽ.