1. تعارف
This manual provides essential information for the proper installation, operation, and maintenance of your Lowrance Active Imaging 3-In-1 Transducer (Model: 000-14489-001). This transducer is designed to enhance your marine electronics system by providing detailed sonar imaging capabilities. Please read this manual thoroughly before installation and use.
2. حفاظت جي ڄاڻ
سامان کي نقصان ۽ زخم کان بچڻ لاءِ هيٺ ڏنل حفاظتي احتياطن تي عمل ڪريو:
- Always disconnect power to the marine electronics system before installing or servicing the transducer.
- Ensure all connections are secure and waterproof to prevent electrical shorts or corrosion.
- Mount the transducer in a location where it will not interfere with boat operation or pose a hazard to swimmers.
- Avoid exposing the transducer to extreme temperatures or harsh chemicals.
3. پيڪيج مواد
انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن:
- Lowrance Active Imaging 3-In-1 Transducer
- Transom Mount Bracket
- ماؤنٽنگ هارڊويئر (اسڪرو، واشر، نٽ)
- انسٽاليشن ٽيمپليٽ (جيڪڏهن شامل هجي)
4. سيٽ اپ ۽ تنصيب
The Lowrance Active Imaging 3-In-1 Transducer is designed for transom mounting. Proper placement is crucial for optimal performance.
4.1 چڙهڻ وارو هنڌ
Select a location on the transom that is:
- Free from obstructions (e.g., propellers, strakes, other transducers).
- In an area of smooth water flow, minimizing turbulence.
- انسٽاليشن ۽ سار سنڀال لاءِ دستياب.
4.2 جسماني تنصيب
- Position the transom mount bracket on the selected location. Ensure the bottom of the transducer will be slightly below the hull line when deployed.
- Mark the drill holes using the bracket as a template.
- Drill pilot holes. Apply marine sealant to prevent water intrusion.
- Secure the transom mount bracket to the boat using the provided mounting hardware.
- Attach the transducer to the bracket. Adjust the angle so the transducer face is parallel to the waterline.
شڪل 1: زاويه view of the Lowrance Active Imaging 3-In-1 Transducer with its transom mount bracket.
شڪل 2: پاسي view of the transducer, illustrating its profile and mounting position.
شڪل 3: هيٺيون view of the transducer, showing the sonar elements.
4.3 برقي ڪنيڪشن
Route the transducer cable to your compatible Lowrance display unit (e.g., HDS LIVE, HDS Carbon, Elite Ti2). The transducer features a 9-Pin connection. Ensure the connector is fully seated and the locking collar is tightened to create a waterproof seal.
5. آپريٽنگ هدايتون
The Active Imaging 3-In-1 Transducer combines multiple sonar technologies to provide a comprehensive view پاڻي هيٺ ماحول جو.
5.1 Sonar Frequencies and Modes
- Med/High CHIRP: روايتي سونار فراهم ڪري ٿو views for fish arches and bottom tracking.
- SideScan: وسيع، اعليٰ ريزوليوشن پيش ڪري ٿو viewتوهان جي ٻيڙيءَ جي ڪنارن تي بناوت ۽ مڇي جا ٽڪرا.
- DownScan: تصوير جهڙو پهچائي ٿو viewتوهان جي ٻيڙيءَ جي هيٺان ساخت ۽ مڇي جا ٽڪرا.
Refer to your Lowrance display unit's manual for detailed instructions on selecting and optimizing these sonar modes.
6. سار سنڀال
Regular maintenance ensures optimal performance and longevity of your transducer.
- صفائي: Periodically clean the transducer face with mild soap and water to remove marine growth, dirt, or oil. Avoid abrasive cleaners or solvents.
- چڪاس: Regularly inspect the transducer cable for cuts, kinks, or damage. Check the mounting bracket for looseness or corrosion.
- سياري ڪرڻ: If operating in freezing conditions, ensure the transducer is not exposed to ice formation, which can cause damage.
7. مسئلا حل ڪرڻ
If you experience issues with your transducer, consider the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| سونار پڙهڻ جي اجازت ناهي | Loose connection, power issue, transducer not submerged. | Check cable connections, verify power to display unit, ensure transducer is in water. |
| Poor or Intermittent Imaging | Air bubbles, marine growth, incorrect mounting angle, electrical interference. | Clean transducer face, adjust mounting angle, check for sources of electrical noise, reposition transducer if necessary. |
| SideScan/DownScan Not Working | Incorrect display unit settings, damaged transducer element. | Verify sonar settings on your display unit. If problem persists, contact support. |
For persistent issues, consult your Lowrance display unit's manual or contact Lowrance customer support.
8. وضاحتون
- ماڊل: 000-14489-001
- قسم: Active Imaging 3-In-1 Transducer
- تعدد: Med/High CHIRP, SideScan, DownScan
- ڪنيڪشن: 9-پن
- چڙهڻ جو قسم: ٽرانسم جبل
- طول و عرض: تقريبن 8 x 6 x 4 انچ (20.3 x 15.2 x 10.2 سينٽي)
- وزن: تقريبن 3.66 پائونڊ (1.66 ڪلوگرام)
- موازن يونٽ HDS LIVE, HDS Carbon, Elite Ti2 series
9. وارنٽي ۽ سپورٽ
This Lowrance Active Imaging 3-In-1 Transducer (Model: 000-14489-001) is covered by a 90 ڏينهن جي محدود وارنٽي خريداري جي تاريخ کان. هي وارنٽي عام استعمال هيٺ مواد ۽ ڪاريگري ۾ خرابين کي ڍڪيندي آهي.
For warranty claims, technical support, or further assistance, please refer to the official Lowrance webسائيٽ تي وڃو يا انهن جي ڪسٽمر سروس ڊپارٽمينٽ سان رابطو ڪريو. وارنٽي جي تصديق لاءِ خريداري جو ثبوت رکو.
