Gdrasuya10 Heart Shape Crystal Ceiling Light Fixture Chandelier

تعارف

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Gdrasuya10 Heart Shape Crystal Ceiling Light Fixture Chandelier. Please read this manual thoroughly before installation and retain it for future reference.

The Gdrasuya10 Heart Shape Crystal Ceiling Light is a modern LED lighting solution designed for indoor use, featuring a unique heart-shaped design with crystal embellishments. It operates at 110 Volts and consumes 24 watts, providing cool white light suitable for various rooms such as living rooms, bedrooms, and restaurants.

حفاظت جي ڄاڻ

خبردار: باهه، بجليءَ جي جھٽڪي، يا ذاتي زخم جي خطري کي گهٽائڻ لاءِ، هميشه انهن حفاظتي احتياطن تي عمل ڪريو:

• انسٽاليشن، صفائي، يا سار سنڀال کان اڳ پڪ ڪريو ته بجلي جي فراهمي بند ٿيل آهي.
• Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring.
• Do not install the fixture on a wet ceiling or in a location where it may be exposed to water.
• Handle crystal components with care to prevent breakage or injury.
• Do not modify the fixture in any way. Use only manufacturer-specified replacement parts.
• هي سامان صرف اندروني استعمال لاء ٺهيل آهي.

پيڪيج مواد

انسٽاليشن شروع ڪرڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن ۽ انهن کي ڪو نقصان نه پهتو آهي.

• 1x Gdrasuya10 Heart Shape Crystal Ceiling Light Fixture
• 1x استعمال ڪندڙ دستياب (هي دستاويز)
• Mounting hardware (screws, wire nuts, etc. - typically included)

وضاحتون

سيٽ اپ ۽ تنصيب

توھان کان پھريان شروع ڪريو: Ensure the power to the circuit breaker is turned off. Gather necessary tools (screwdriver, wire strippers, electrical tape, ladder).

1. پاور بند ڪريو: Locate the circuit breaker controlling the light fixture location and turn it off. Verify power is off using a voltagاي جاچ ڪندڙ.
2. چڙهڻ واري مٿاڇري تيار ڪريو: If replacing an existing fixture, carefully remove it. Ensure the junction box is securely mounted to the ceiling.
3. ماؤنٽنگ بریکٹ ڳنڍيو: Secure the fixture's mounting bracket to the junction box using the provided screws.
4. وائر ڪنيڪشن: Connect the electrical wires according to standard wiring practices. Match the live (black) wire from the fixture to the live (black) wire from the ceiling, the neutral (white) wire from the fixture to the neutral (white) wire from the ceiling, and the ground (green or bare copper) wire to the ground wire. Use wire nuts to secure connections and electrical tape for added insulation.
5. فڪسچر لڳايو: Carefully lift the light fixture and align it with the mounting bracket. Secure the fixture to the bracket using the provided screws or fasteners.
6. Install Crystal Embellishments (if separate): If crystals are provided separately, carefully attach them to the designated areas on the fixture as per the design.
7. پاور بحال ڪريو: Once the fixture is securely installed and all connections are checked, turn the power back on at the circuit breaker.

Figure 1: Product Dimensions. This image illustrates the length, width, and height of the Gdrasuya10 Heart Shape Crystal Ceiling Light Fixture, providing crucial measurements for installation planning.

Figure 2: Close-up of Crystal Details. This image provides a detailed view of the crystal embellishments and the overall construction of the light fixture, useful for understanding assembly or aesthetic details.

آپريٽنگ هدايتون

The Gdrasuya10 Heart Shape Crystal Ceiling Light Fixture is designed for simple operation.

1. پاور آن / آف: Use the standard wall switch connected to the fixture's electrical circuit to turn the light on or off.
2. روشني جي پيداوار: The fixture provides a cool white light. There are no adjustable settings for brightness or color temperature on this model.

Figure 3: Fixture in Bedroom Setting. This image shows the ceiling light installed in a bedroom, demonstrating its appearance and light distribution in a typical residential environment.

سار سنڀال

Regular maintenance will help preserve the appearance and functionality of your ceiling light.

• صفائي: صفائي ڪرڻ کان اڳ، پڪ ڪريو ته سرڪٽ بريڪر تي بجلي بند ٿيل آهي. نرم، خشڪ، يا ٿورو ڊي استعمال ڪريوamp cloth to wipe the metal and acrylic surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• ڪرسٽل جي سنڀال: For crystal components, use a soft, lint-free cloth. A mild glass cleaner can be used sparingly if needed, applied to the cloth, not directly to the crystals.
• چڪاس: Periodically check for any loose wiring or damage. If any issues are found, disconnect power and consult a qualified electrician.

مشڪلاتون

If you encounter issues with your ceiling light, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, consult a qualified electrician or contact customer support.

وارنٽي ۽ سپورٽ

For warranty information or technical support, please refer to the retailer where the product was purchased or visit the official Gdrasuya10 webسائيٽ. ڪنهن به وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.

ٺاهيندڙ: RibasuBB

UPC: 738635568878