1. حفاظت جي ڄاڻ
Please read all safety instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Ensure the power supply matches the device's requirements (120VAC, 60Hz).
- Do not exceed the maximum load of 15A/1875W.
- Keep the controller and probe away from water or excessive moisture, except for the waterproof probe tip.
- ڊوائيس کي ڌار نه ڪريو يا تبديل نه ڪريو. سڀني سروسنگ کي قابل اهلڪارن جي حوالي ڪريو.
- Always unplug the controller from the power outlet before cleaning or performing maintenance.
- This device is equipped with overload protection. In case of an overload, the power output and screen display will automatically cut off to prevent damage.
Image 1.1: Overload Protection Feature. This image shows the iPower temperature controller with a visual indicator pointing to the power cord, emphasizing the 'OVERLOAD PROTECTED' text. It explains that in case of an overload, the power output and screen display will be cut off.
2. پراڊڪٽ ختمview
The iPower Professional Digital Heating and Cooling Temperature Controller is designed to maintain precise temperature control for various applications, including seed germination, reptile habitats, brewing, and greenhouse environments. It features dual outlets for simultaneous heating and cooling device control, a digital display, and a waterproof temperature probe.
2.1 پيڪيج مواد
- iPower Digital Temperature Controller (Model GLCTRLHEATCOOL15)
- Waterproof Temperature Probe
- استعمال ڪندڙ دستي
2.2 اهم خاصيتون
- ٻٽي ڪارڪردگي: Controls both heating and cooling devices simultaneously.
- اعلي درستگي: Professional-grade waterproof temperature probe.
- ڊجيٽل ڊسپلي Dual readouts for measured (PV) and set (SV) temperatures.
- يونٽ جي چونڊ: Supports both Fahrenheit (°F) and Celsius (°C).
- آسان آپريشن: Intuitive 6-button interface.
- اوور لوڊ تحفظ: Enhances safety by cutting power during overloads.
تصوير 2.1: سامهون View of the iPower Temperature Controller. This image displays the main unit of the iPower temperature controller, showing its digital display, control buttons, heating and cooling outlets, power cord, and the attached temperature probe.
Image 2.2: Independent Heating & Cooling Functionality. This image illustrates how the controller can manage both a heating device (represented by a sun icon) and a cooling device (represented by a snowflake icon) simultaneously through its dedicated outlets.
Image 2.3: LED Display and Power Indicators. This image highlights the clear and easy-to-read LED display of the controller, showing temperature readings and indicating the status of heating and cooling operations.
Image 2.4: Wide Range of Uses. This image displays various applications for the iPower temperature controller, including aquariums, greenhouses, seed germination, and reptile enclosures, demonstrating its versatility.
3. سيٽ اپ
3.1 شروعاتي جڳهه
Place the controller in a dry, stable location. Ensure adequate ventilation around the unit.
3.2 چڙهڻ (اختياري)
The controller can be mounted on a wall using the two keyholes located on the back of the unit. Securely fasten the controller to a suitable surface using appropriate screws (not included).
Image 3.1: Wall Mounting Option. This image shows the iPower temperature controller mounted on a wall, highlighting the keyholes on the back for secure installation.
3.3 پروب کي ڳنڍڻ
Insert the temperature probe into the designated port on the controller. Position the probe in the environment where temperature monitoring and control are required. Ensure the probe tip is fully immersed or positioned correctly for accurate readings.
3.4 ڳنڍڻ وارا آلات
- Plug your heating device into the outlet labeled 'HEATING'.
- Plug your cooling device into the outlet labeled 'COOLING'.
- Plug the controller's power cord into a standard 120VAC, 60Hz electrical outlet.
4. آپريٽنگ هدايتون
The controller features a 6-button interface for easy programming:
- طاقت: يونٽ کي آن/آف ڪري ٿو.
- يوپي: قدر وڌائي ٿو يا مينيو کي نيويگيٽ ڪري ٿو.
- هيٺون قدر گھٽائي ٿو يا مينيو کي نيويگيٽ ڪري ٿو.
- سيٽ: پروگرامنگ موڊ ۾ داخل ٿئي ٿو يا سيٽنگن جي تصديق ڪري ٿو.
- CF/ST: Toggles between Celsius and Fahrenheit, or enters specific settings.
- CLR: Clears current input or exits programming mode.
4.1 پاور آن/آف
کي دٻايو پاور button to turn the controller on. Press and hold the پاور button for approximately 3 seconds to turn it off.
4.2 ڊسپلي ريڊنگز
- پي وي (عمل جي قيمت): پروب ذريعي موجوده ماپيل درجه حرارت ڏيکاري ٿو.
- ايس وي (مقرر ڪيل قدر): توهان جي مقرر ڪيل هدف جي درجه حرارت کي ڏيکاري ٿو.
4.3 Setting Temperature Units (°F/°C)
کي دٻايو CF/ST button to toggle the temperature display between Fahrenheit (°F) and Celsius (°C).
4.4 Setting the Target Temperature (SV)
- کي دٻايو سيٽ button once. The SV display will begin to flash.
- استعمال ڪريو UP or هيٺ buttons to adjust the target temperature to your desired value.
- کي دٻايو سيٽ button again to confirm the setting and exit programming mode.
4.5 Heating and Cooling Operation
Once the target temperature (SV) is set, the controller will automatically activate the heating or cooling outlet based on the current measured temperature (PV) and the set differential (hysteresis, typically pre-set). If PV is below SV, the heating outlet activates. If PV is above SV, the cooling outlet activates.
5. سار سنڀال
5.1 صفائي
- Always unplug the controller before cleaning.
- Wipe the controller's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- The temperature probe can be cleaned with a damp cloth. Ensure it is dry before re-inserting into any environment.
5.2 اسٽوريج
When not in use, store the controller in a cool, dry place, away from direct sunlight and extreme temperatures.
6. مسئلا حل ڪرڻ
If you encounter issues with your iPower Temperature Controller, refer to the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ڪنٽرولر تي طاقت نه آهي. | No power supply; Power button not pressed correctly. | Ensure the controller is securely plugged into a live outlet. Press and hold the پاور بٽڻ کي 3 سيڪنڊن لاء آن ڪرڻ لاء. |
| Controller does not turn on automatically after a power outage. | This model requires manual restart after power interruption. | هڪ طاقت کان پوءtage, manually press and hold the پاور button for 3 seconds to restart the unit. |
| Heating/Cooling device not activating. | Device not plugged in; Temperature not within activation range; Controller overload. | Check if the device is properly plugged into the correct outlet. Verify the set temperature (SV) and current temperature (PV). Check for overload condition. |
| غلط درجه حرارت پڙھڻ. | Probe improperly placed; Damaged probe. | Ensure the probe is correctly positioned and clean. If readings remain inaccurate, the probe may need replacement. |
| Controller trips circuit breaker. | Overload; Faulty device connected. | مجموعي واٽ کي يقيني بڻائيtage of connected devices does not exceed 1875W. Test devices individually to identify a faulty one. |
7. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | GLCTRLHEATCOOL15 |
| درجه بندي Voltage | 120VAC ، 60 هز |
| وڌ ۾ وڌ لوڊشيڊنگ | 15A / 1875W, 1/2HP, TV-5 |
| Probe Working Temperature | -58 کان 230 ° ف (-50 کان 110 ° سي) |
| Controller Working Temperature | -40 کان 176 ° ف (-40 کان 80 ° سي) |
| پيداوار جي ماپ | 8.27 x 6.15 x 2.36 انچ |
| شيءِ جو وزن | 1.45 پائونڊ |
| ڊسپلي جو قسم | ايل سي ڊي |
| پروب ڪيبل جي ڊيگهه | 75 انچ (تقريبن) |
| پاور ڪيبل ڊگھائي | 75 انچ (تقريبن) |
Image 7.1: Controller Dimensions and Cable Lengths. This image provides a visual representation of the controller's physical dimensions (4.55" x 4.55" x 1.6") and the lengths of both the probe cable and power cable (75" each).
Image 7.2: Temperature Working Ranges. This image visually represents the working temperature ranges for both the controller (-40 to 176°F) and the probe (-58 to 230°F).
8. وارنٽي ۽ سپورٽ
iPower products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official iPower webسائيٽ. مھرباني ڪري وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
For further assistance, you may contact iPower customer service through their official channels. Details are typically found on the product packaging or the manufacturer's webسائيٽ.
