Sygonix SY-4504968 ڊجيٽل بلٽ ان ٽائمر يوزر مينوئل

1. تعارف

The Sygonix SY-4504968 Digital Timer is designed for automated control of electrical devices, such as lighting, in homes or offices. This versatile timer offers 15 programmable configurations, including weekly settings, allowing for up to 20 switching times per day, totaling 140 switching points per week. It features automatic summer and winter time adjustment, a countdown function, and a random mode. The timer supports both flush and surface mounting.

Please read this manual thoroughly before installation and operation to ensure correct usage and to prevent damage.

شڪل 1: سامهون view of the Sygonix SY-4504968 Digital Built-in Timer, showing the digital display and the main power button.

2. حفاظتي هدايتون

• مقامي اليڪٽريڪل ڪوڊس ۽ ضابطن جي مطابق، انسٽاليشن هڪ قابل اليڪٽريشن طرفان ڪئي وڃي.
• Ensure the power supply is disconnected before installation, maintenance, or any wiring work.
• The device requires a neutral wire for operation. Verify its presence in your electrical box.
• Do not exceed the maximum load capacity of 1800 W.
• ڊوائيس کي نمي، انتهائي گرمي پد، يا سڌي سج جي روشني ۾ نه لڳايو.
• ڊوائيس کي ڌار ڪرڻ يا تبديل ڪرڻ جي ڪوشش نه ڪريو. سڀني سروسنگ کي قابل اهلڪارن جي حوالي ڪريو.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• Sygonix SY-4504968 Digital Built-in Timer
• Surface mount frame
• چڙهڻ اسڪرو ۽ وال پلگ
• ھدايت وارو دستور

4. پراڊڪٽ ختمview

The timer features a digital display and control buttons located behind a protective cover.

شڪل 2: بند ڪرڻ view of the timer's digital display, showing time, day (TU for Tuesday), and 'PROG' and 'ON' indicators.

شڪل 3: The timer with its protective cover open, revealing the control buttons for programming and settings.

4.1. ڏيکاريو اشارا

• وقت ڏيکاري: Shows current time in HH:MM format.
• ڏينهن جو اشارو: Displays the current day of the week (e.g., MO, TU, WE).
• پيشڪش: Indicates that a program is active or being set.
• آن/بند: Indicates the current switching state of the connected device.

4.2. Control Buttons (behind cover)

• Clock/Set Button: Used to set the current time and day.
• PROG بٽڻ: Enters program setting mode.
• RND (Random) Button: Activates/deactivates random switching mode.
• CD (Countdown) Button: Activates/deactivates countdown function.
• +/- بٽڻ: Used to adjust values (time, program settings).
• آر (ري سيٽ) بٽڻ: Resets the timer to factory defaults.

5. تنصيب

The timer can be installed either flush-mounted into a wall box or surface-mounted using the provided frame.

5.1. وائرنگ ڊاگرام

اهم: Ensure the main power supply is switched off before proceeding with any wiring. This device requires a neutral wire connection.

Connect the Live (L), Neutral (N), and Switched Live (L') wires according to the diagram provided with the product. The neutral wire is essential for the timer's internal clock and display to function.

5.2. فلش لڳائڻ

1. Prepare a standard wall box (minimum depth of 50mm recommended for easier wiring).
2. Connect the electrical wires to the terminals on the back of the timer as per the wiring diagram.
3. Carefully push the timer into the wall box, ensuring wires are not pinched.
4. مهيا ڪيل اسڪرو استعمال ڪندي ٽائمر کي وال باڪس ۾ محفوظ ڪريو.
5. Attach the front cover plate.

شڪل 4: The digital timer flush-mounted into a wall, blending with the room's decor.

5.3. Surface Mounting

1. Attach the surface mount frame to the wall using the provided screws and wall plugs.
2. Connect the electrical wires to the terminals on the back of the timer.
3. Insert the timer into the surface mount frame, ensuring a secure fit.
4. Attach the front cover plate.

شڪل 5: پاسي view of the timer, illustrating its depth for installation considerations.

6. سيٽ اپ

6.1. Initial Power-On and Reset

After installation and restoring power, the display will light up. If the display is erratic or shows incorrect values, press the آر (ري سيٽ) button with a pointed object (e.g., a pen tip) to clear all settings and restore factory defaults.

6.2. موجوده وقت ۽ ڏينهن مقرر ڪرڻ

1. Open the protective cover to access the control buttons.
2. کي دٻايو ۽ رکو Clock/Set button for approximately 3 seconds until the time display flashes.
3. استعمال ڪريو +/- ڪلاڪ کي ترتيب ڏيڻ لاءِ بٽڻ. دٻايو Clock/Set again to confirm and move to minutes.
4. استعمال ڪريو +/- buttons to adjust the minutes. Press Clock/Set again to confirm and move to day.
5. استعمال ڪريو +/- buttons to select the current day of the week (MO, TU, WE, TH, FR, SA, SU).
6. دٻايو Clock/Set one last time to save the settings and exit the time setting mode.

6.3. Automatic Summer/Winter Time Adjustment

The timer is equipped with an automatic summer/winter time adjustment feature. This function typically activates automatically based on pre-programmed dates. No manual intervention is usually required for this feature.

7. آپريٽنگ

7.1. Programming Weekly Schedules

The timer allows for up to 15 different program configurations, with 20 switching times per day, totaling 140 switching points per week.

1. کي دٻايو واڌو button to enter program setting mode. The display will show '1 ON' (for program 1, switch-on time).
2. استعمال ڪريو +/- buttons to set the desired switch-on hour. Press واڌو to confirm and move to minutes.
3. استعمال ڪريو +/- buttons to set the desired switch-on minutes. Press واڌو to confirm and move to day selection.
4. استعمال ڪريو +/- buttons to select the day(s) for this program. You can choose individual days, blocks of days (e.g., MO-FR), or all days. Press واڌو تصديق ڪرڻ.
5. The display will now show '1 OFF' (for program 1, switch-off time). Repeat steps 2-4 to set the switch-off time and day(s) for this program.
6. After setting the 'OFF' time, press واڌو again to move to the next program ('2 ON') or to exit program setting mode if no more programs are needed.
7. To exit program mode at any time, press the Clock/Set بٽڻ

7.2. Countdown فنڪشن

The countdown function allows you to set a specific duration after which the connected device will switch ON or OFF.

1. کي دٻايو CD (Countdown) button. The display will show 'CD' and a default countdown time.
2. استعمال ڪريو +/- buttons to adjust the desired countdown duration (hours and minutes).
3. دٻايو CD again to start the countdown. The device will switch its state (ON to OFF, or OFF to ON) once the countdown finishes.
4. ڳڻپ کي منسوخ ڪرڻ لاءِ، دٻايو CD button again during the countdown.

7.3. Random Mode

The random mode switches the connected device ON and OFF at irregular intervals, simulating presence for security purposes.

1. کي دٻايو RND (Random) button. The display will show 'RND'.
2. The timer will now activate and deactivate the connected device at random times within a predefined period (e.g., 30 minutes to 2 hours).
3. To deactivate random mode, press the آر اين ڊي button again. The 'RND' indicator will disappear.

8. سار سنڀال

• ڊوائيس کي نرم، سڪل ڪپڙي سان صاف ڪريو. رگڙيندڙ صاف ڪندڙ يا محلول استعمال نه ڪريو.
• The internal battery (if present for memory backup) is typically long-lasting and not user-replaceable. If the timer loses settings during power outages, the battery may need professional replacement.

9. مسئلا حل ڪرڻ

10. وضاحتون

• ماڊل: SY-4504968
• ٺاهيندڙ: سيگونڪس
• جلدtage: 230 وولٽ
• وڌ. لوڊ: 1800 ڊبليو
• پيداوار جي ماپ (L x W x H): 12 x 9 x 8 سينٽي
• وزن: 230 گرام
• ڊسپلي جو قسم: ڊجيٽل
• پروگرامن جو تعداد: 15
• Switching Points: Up to 140 per week (20 per day)
• بيٽرين جي ضرورت آهي: Yes (for internal clock/memory backup, typically not user-replaceable)

11. وارنٽي ۽ سپورٽ

Sygonix products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official Sygonix website. For technical support, troubleshooting assistance, or spare parts, please contact your retailer or the Sygonix customer service department.