AcuRite Pro Humidity Meter & Thermometer with Touch Activated Backlight (Model 01139M) Instruction Manual

1. تعارف

The AcuRite Pro Humidity Meter & Thermometer with Touch Activated Backlight (Model 01139M) is designed to provide accurate measurements of indoor temperature and humidity. This device helps you monitor environmental conditions to ensure comfort and protect sensitive items.

اهم خاصيتون:

• Enhanced Accuracy: Detects changes in temperature and humidity every 10 seconds.
• Backlight فنڪشن: آسانيءَ سان view temperature & humidity levels at any time, day or night, with a touch-activated backlight.
• گھڻن چڙهڻ جا اختيار: Features a tabletop stand and magnet-mountable design for versatile placement.
• Responsive Readings: Indicates current air conditions to ensure proper humidity control.
• Record High and Lows: Displays 24-hour and all-time record high and low readings.
• Area-Specific Monitoring: Calibrate the sensor to each room or environment for accurate data.

2. سيٽ اپ

2.1. بيٽري لڳائڻ

1. يونٽ جي پوئين پاسي بيٽري جي خاني کي ڳوليو.
2. بيٽري جي ڪمري واري ڍڪ کي هٽايو.
3. Insert 2 AA batteries (not included) into the compartment, ensuring correct polarity (+ and -).
4. بيٽري جي ڪمري واري ڍڪ کي تبديل ڪريو.

2.2. شروعاتي پاور اپ

Once batteries are installed, the unit will power on automatically and begin displaying current temperature and humidity readings. Allow a few minutes for the sensor to stabilize and provide accurate readings.

3. آپريٽنگ هدايتون

3.1. مٿي ڏيکاريوview

The large, easy-to-read display shows:

• موجوده نمي (٪)
• Current Temperature (°F or °C)
• 24-hour High/Low Humidity and Temperature records
• All-time High/Low Humidity and Temperature records
• Humidity Level Indicator (LOW, OK, HIGH)
• Trend Arrows for Humidity and Temperature

3.2. Touch-Activated Backlight

To activate the backlight, gently touch the top edge of the unit where indicated by the "touch light" icon. The backlight will illuminate for approximately 10 seconds, allowing for easy viewگهٽ روشني واري حالتن ۾.

3.3. Switching Temperature Units (°F/°C)

To switch between Fahrenheit (°F) and Celsius (°C), locate the "°F/°C" button on the back of the unit (refer to Figure 2). Press this button to toggle between the two temperature units.

3.4. Clearing High/Low Records

To clear the 24-hour high and low records, press and hold the "CLEAR" button on the back of the unit for a few seconds. All-time records are typically reset only upon battery removal or factory reset.

4. چڙهڻ جا اختيار

The AcuRite Pro Humidity Meter & Thermometer offers flexible placement options:

• ٽيبل ٽاپ: Use the integrated kickstand on the back of the unit to place it on any flat surface.
• Magnet-Mountable: The unit features magnets on its back, allowing it to be securely attached to metallic surfaces like refrigerators or metal doors.

5. سار سنڀال

5.1. بيٽري مٽائڻ

When the battery indicator appears on the display, it is time to replace the batteries. Follow the battery installation steps (Section 2.1) to replace the 2 AA batteries. Replacing batteries will reset 24-hour high/low records.

5.2. صفائي

يونٽ کي نرم سان مسح ڪريو، ڊيamp ڪپڙو. گھڙڻ وارا صاف ڪندڙ يا محلول استعمال نه ڪريو، ڇاڪاڻ ته اهي ڊسپلي يا سي کي نقصان پهچائي سگهن ٿاasing.

6. مسئلا حل ڪرڻ

6.1. غلط پڙهڻيون

• Ensure the unit is placed in a location away from direct sunlight, heat sources, or drafts, which can affect accuracy.
• Allow the unit to stabilize for at least 20 minutes after initial setup or relocation.
• Replace batteries if the low battery indicator is displayed.

6.2. ڊسپلي ڪم نه ڪري رهيو آهي

• Check battery orientation and ensure they are inserted correctly.
• تازو بيٽرين سان تبديل ڪريو.
• جيڪڏهن مسئلو جاري رهي، ڪسٽمر سپورٽ سان رابطو ڪريو.

7. وضاحتون

8. دٻي ۾ ڇا آهي

• AcuRite Pro Humidity Meter & Thermometer
• ھدايت وارو دستور

9. وارنٽي ۽ سپورٽ

وارنٽي جي معلومات، ٽيڪنيڪل سپورٽ، يا پنهنجي پراڊڪٽ کي رجسٽر ڪرڻ لاءِ، مهرباني ڪري سرڪاري AcuRite جو دورو ڪريو website or contact their customer service directly. Specific warranty details may vary and are typically provided with the product packaging or on the manufacturer's webسائيٽ.