Mounting Dream MD2285-XL 40-Inch Long Arm Full Motion TV Wall Mount Instruction Manual

1. تعارف

This manual provides comprehensive instructions for the safe and efficient installation and operation of your Mounting Dream MD2285-XL 40-Inch Long Arm Full Motion TV Wall Mount. This mount is designed to securely hold most 42-90 inch televisions with VESA patterns ranging from 200x100mm to 800x400mm and a maximum weight capacity of 150 lbs. It is compatible with 16-inch, 18-inch, and 24-inch wood stud spacing.

Please read all instructions carefully before beginning installation. If you have any questions, refer to the troubleshooting section or contact customer support.

2. اهم حفاظتي ڄاڻ

• وزن جي گنجائش: وڌ ۾ وڌ وزن جي گنجائش 150 پائونڊ (68 ڪلوگرام) کان وڌيڪ نه ڪريو. هن حد کان وڌيڪ ڪرڻ سان سخت زخمي يا ملڪيت کي نقصان ٿي سگهي ٿو.
• ٽي وي سائيز: This mount is designed for 42-90 inch TVs. Ensure your TV falls within this range.
• VESA مطابقت: Verify your TV's VESA mounting pattern (distance between mounting holes on the back of the TV) is between 200x100mm and 800x400mm.
• ڀت جو قسم: This mount is intended for installation on wood studs (16", 18", 24" spacing), solid concrete, or brick walls. اڪيلو drywall ۾ انسٽال نه ڪريو.
• پيشه ورانه تنصيب: جيڪڏهن توهان کي انسٽاليشن جي عمل يا توهان جي ڀت جي مناسب هجڻ بابت پڪ ناهي، ته ڪنهن قابل پيشه ور سان صلاح ڪريو.
• اجزاء جي چڪاس: Before installation, ensure all parts are present and undamaged. Do not use damaged parts.
• ڪيبل جو انتظام: Secure all cables to prevent accidental disconnections or damage when adjusting the TV.

3. پيڪيج مواد

مھرباني ڪري تصديق ڪريو ته سڀئي جزا توھان جي پيڪيج ۾ شامل آھن:

Image: The Mounting Dream MD2285-XL TV wall mount, including the wall plate, TV brackets, articulating arms, and a bubble level. This image displays all the main components of the product.

• وال پليٽ اسيمبلي
• ٽي وي بريڪٽس (2x)
• آرٽيڪوليٽنگ آرم اسيمبلي
• ماؤنٽنگ هارڊويئر ڪٽ (مختلف اسڪرو، واشر، اسپيسر)
• بلبل جي سطح
• ڪيبل ٽائيز (ڪيبل مينيجمينٽ لاءِ)
• چڙهڻ وارو نمونو

4. گهربل اوزار (شامل نه آهن)

• اسٽڊ فائنڊر (ڪاٺ جي اسٽڊ جي انسٽاليشن لاءِ)
• سوراخ ڪرڻ
• Drill Bits (appropriate for pilot holes and lag bolts)
• ساکٽ ونچ
• فلپس هيڊ اسڪوشرو
• پنسل
• ماپڻ وارو ٽيپ
• هٿوڙو (ڪنڪريٽ اينڪرز لاءِ)

5. سيٽ اپ ۽ تنصيب

Follow these steps carefully to ensure a secure installation. It is recommended to have at least two people for TV mounting.

5.1. قبل از انسٽاليشن چيڪ

• ٽي وي مطابقت جي تصديق ڪريو:
  Ensure your TV is between 42-90 inches and weighs no more than 150 lbs. Check the VESA mounting pattern on the back of your TV. It should be between 200x100mm and 800x400mm.
  

  Image: Graphic illustrating TV size compatibility (42-90 inches) and maximum weight capacity (150 lbs).
  

  Image: Diagram showing how to measure horizontal and vertical VESA mounting holes on the back of a TV.

• Check Cable Outlets: Ensure the mount will not block any cable outlets on your TV.
  

  Image: Illustration of checking TV cable outlets to ensure they are not obstructed by the mount.

• ديوار جي قسم جي سڃاڻپ: Determine if your wall is made of wood studs, solid concrete, or brick. Do not install on drywall alone.
  

  Image: Visual guide showing compatible wall types: Concrete Wall, Wood Wall (16", 18", 24" studs), and Brick Wall. A warning against drywall-only installation is present.

5.2. تنصيب جا مرحلا

1. Attach Brackets to TV Back: Secure the TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit.
   

   Image: A three-panel image showing the installation steps: 1) Attach brackets to TV back, 2) Install the wall plate, 3) Hang the TV onto the wall plate.

2. چڙهڻ واري سوراخن کي نشان لڳايو: Use the provided mounting template and a pencil to mark the desired location for the wall plate on your wall. Ensure it is level using the bubble level.
   

   Image: A person marking mounting holes on a wall using a template and pencil, indicating stud spacing options.
3. پائلٽ سوراخ ڪريو: Drill pilot holes at the marked locations. For wood studs, use a drill bit slightly smaller than the lag bolts. For concrete/brick, use a masonry drill bit and insert anchors (if provided or purchased separately).
4. وال پليٽ سان ڳنڍيو: Secure the wall plate assembly to the wall using the lag bolts (and anchors for concrete/brick). Use a socket wrench to tighten securely.
   

   Image: A person using a wrench to secure the wall plate to the wall, showing the attachment points.

5. ٽي وي رکو: Carefully lift the TV (with brackets attached) and hook it onto the wall plate. Ensure it is properly seated.
6. Secure TV to Wall Plate: Use the provided clips or screws to lock the TV brackets to the wall plate, preventing accidental dislodgement.
   

   تصوير: ويجهو تصوير view of the TV mount mechanism, highlighting features like simple cable storage, ±3° leveling screws, adjust & lock tilting angle with handle, and clips to lock the TV in place.

6. آپريٽنگ هدايتون

The MD2285-XL mount offers versatile adjustments for optimal viewing.

6.1. واڌ ۽ واپسي

Gently pull the TV away from the wall to extend the arm up to 40 inches. Push the TV back towards the wall to retract it to a minimum distance of 3 inches. This feature is ideal for corner placement or adjusting viewفاصلو.

Image: A TV mounted on the wall, with the arm extended 40 inches from the wall and retracted to 3 inches, demonstrating the long extension design.

Image: A TV mounted in a corner, demonstrating the flexibility of the long arm for optimal corner placement.

6.2. گھمڻ واري ترتيب

The TV can swivel up to 90 degrees left or right, depending on TV size, allowing you to adjust the viewing angle from various positions in the room.

Image: A TV swiveling up to 90 degrees left and right, illustrating the wide viewing angle flexibility.

6.3. ٽائل ترتيب ڏيڻ

Adjust the TV tilt from +5° (upward) to -12° (downward) to reduce glare and achieve a comfortable viewing angle. Use the tilting adjustment handle to set and lock the desired angle.

Image: A TV tilted backward by 5 degrees and forward by 12 degrees, demonstrating the tilt range for glare reduction.

6.4. Post-Installation Leveling

If the TV is slightly unlevel after installation, you can adjust it by ±3° using the leveling screws on the TV plate.

Image: A TV being adjusted by ±3 degrees for post-installation leveling, ensuring a perfectly horizontal display.

7. سرڪاري پراڊڪٽ وڊيوز

8. سار سنڀال

• باقاعده چڪاس: وقتي طور تي سڀني پيچرن ۽ ڪنيڪشنن کي چيڪ ڪريو ته جيئن پڪ ٿئي ته اهي تنگ ۽ محفوظ آهن.
• صفائي: Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• لوڻ: جيڪڏهن ڳنڍندڙ هٿ سخت ٿي وڃن، ته ٿوري مقدار ۾ سلڪون تي ٻڌل لوبريڪنٽ پيوٽ پوائنٽس تي لڳائي سگهجي ٿو.

9. مسئلا حل ڪرڻ

• ٽي وي ليول نه آهي: Use the post-installation leveling screws to adjust the TV by ±3°.
• جبل ڍلو محسوس ٿئي ٿو: Re-check all wall plate and TV bracket screws to ensure they are securely tightened.
• Difficulty moving the arm: Apply a small amount of silicone lubricant to the pivot points of the articulating arm. Ensure no cables are obstructing movement.
• TV not fitting: Double-check your TV's VESA pattern, size, and weight against the specifications in this manual.

10. وضاحتون

11. وارنٽي ۽ ڪسٽمر سپورٽ

Mounting Dream products are backed by a 10-year warranty, ensuring quality and durability. For any questions regarding product installation, operation, or general inquiries, our world-class customer service team is available 7 days a week to assist you.

Please visit the official Mounting Dream webمدد لاءِ سائيٽ تي وڃو يا اسان جي سپورٽ ٽيم سان رابطو ڪريو.