FLOWPAC DC 12V 1500 GPH Utility Submersible Sump Pump with Switch Instruction Manual

1. تعارف

This manual provides essential information for the safe and efficient operation of your FLOWPAC DC 12V 1500 GPH Utility Submersible Sump Pump. Please read these instructions carefully before installation and use, and retain them for future reference. This pump is designed for various water transfer applications, operating with a 12-volt DC power source.

2. حفاظت جي ڄاڻ

• برقي حفاظت: Always ensure the 12V DC power source is disconnected before performing any installation, maintenance, or troubleshooting. Use appropriate battery connections and avoid short circuits.
• پاڻي جي گرمي پد: Do not use this pump for liquids exceeding 120°F (49°C) or below 32°F (0°C).
• خشڪ رننگ: NEVER operate the pump without water. Running the pump dry will cause severe damage to the motor due to lack of cooling and lubrication, and will void the warranty.
• لڳائڻ: Ensure the pump is placed on a stable, level surface. Avoid placing it directly in mud, sand, or silt, as these materials can clog the intake and damage the pump.
• نيڪال جو حوض: Use a discharge hose of adequate diameter (3/4" or larger) to minimize friction loss and ensure efficient operation.
• ٻار ۽ پالتو جانور: آپريشن دوران ٻارن ۽ پالتو جانورن کي پمپ کان پري رکو.

3. پيڪيج مواد

پيڪيج کولڻ وقت پڪ ڪريو ته سڀئي شيون موجود آهن ۽ انهن کي ڪو نقصان نه پهتو آهي:

• 1 x FLOWPAC DC 12V Submersible Sump Pump (Model FX701)
• 1 x 20-foot Battery Cord with On/Off Switch
• 2 x Battery Alligator Clips (Red for positive, Black for negative)
• 1 x 3/4" Garden Hose Adapter

4. وضاحتون

Image: The FLOWPAC FX701 pump shown alongside a table detailing its technical specifications.

Image: A detailed diagram of the pump, highlighting components such as the discharge, handle, power clip, intake screen, and switch, along with key dimensions.

5. سيٽ اپ

5.1. Pump Placement

Install the pump on a hard, level surface within the water. To prevent clogging and damage, avoid placing the pump directly in mud, sand, silt, or on rocky surfaces. If necessary, use bricks or patio blocks to elevate the pump off the bottom.

5.2. Hose ڪنيڪشن

Connect a discharge hose to the pump's outlet. You can use the provided 3/4" garden hose adapter or another suitable hose fitting (sold separately). For optimal performance and to minimize friction loss, ensure the hose diameter is 3/4" or larger.

5.3. بيٽري ڪنيڪشن

Connect the battery alligator clips to a 12-volt DC battery (battery not included). Ensure correct polarity:

• ڳنڍيو ڳاڙهو alligator ڪلپ ڏانهن هاڪاري (+) terminal on the battery.
• ڳنڍيو ڪارو alligator ڪلپ ڏانهن ناڪاري (-) terminal on the battery.

Image: A visual guide illustrating the steps for pump installation in water and connecting the battery clips to a 12V battery.

6. آپريشن

1. Once the pump is correctly placed and connected to the battery and discharge hose, turn on the pump power switch located on the cord.
2. The pump will begin operating, effectively removing water down to approximately 1/8" to 1/4" from the surface.
3. اهم: Do not allow the pump to run dry. The pump relies on water for cooling and internal lubrication. Continuous dry operation will lead to motor overheating and permanent damage.
4. This pump features an anti-airlock hole. A small stream of water will be visible from this hole during operation. This is normal and indicates proper function. Periodically inspect and clean this hole to prevent airlock issues.
5. When pumping is complete, turn off the power switch.

Image: The FLOWPAC submersible pump actively pumping water from a container, showing the discharge stream.

6.1. عام ايپليڪيشنون

This versatile pump is suitable for a wide range of applications, including:

• Basement dewatering
• Draining pools and hot tubs
• Removing water from flat roofs and window wells
• General utility pumping in outdoor settings
• Use in camping/RV scenarios
• Pond and farm applications

Image: A graphic illustrating diverse uses for the pump, such as in homes, outdoors, basements, pools, flat roofs, and for camping/RV.

7. سار سنڀال

باقاعده سار سنڀال توهان جي پمپ جي ڊگهي عمر ۽ بهترين ڪارڪردگي کي يقيني بڻائي ٿي.

• Clean Intake Screen: Periodically inspect and clean the intake screen to remove any debris that may restrict water flow.
• Anti-Airlock Hole: Ensure the anti-airlock hole is clear of obstructions. A clogged hole can lead to airlock and prevent the pump from priming.
• عام چڪاس: Before each use, check the pump body, power cord, and connections for any signs of damage, wear, or corrosion. Do not use a damaged pump.
• اسٽوريج: When not in use, clean the pump thoroughly with fresh water, dry it, and store it in a cool, dry place away from direct sunlight and freezing temperatures.

8. مسئلا حل ڪرڻ

9. وارنٽي ۽ سپورٽ

The FLOWPAC DC 12V 1500 GPH Utility Submersible Sump Pump comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use conditions.

مهرباني ڪري نوٽ ڪريو: Defects or damages resulting from improper use, misuse, neglect, unauthorized modifications, or operation without water (dry running) are not covered under this warranty.

For technical assistance, warranty claims, or any questions regarding your product, please contact FLOWPAC customer support. Refer to your purchase documentation for specific contact details or visit the official FLOWPAC webسائيٽ.