1. تعارف
The Topping PRE90 is a high-performance preamplifier designed for audio enthusiasts. It features ultra-high NFCA modules, offering exceptional sound quality with balanced XLR and RCA outputs. This manual provides detailed instructions for setup, operation, and maintenance of your PRE90 preampوierيڪ زنده
2. پيڪيج مواد
پيڪنگ کولڻ تي، مھرباني ڪري تصديق ڪريو ته ھيٺ ڏنل سڀ شيون موجود آھن ۽ سٺي حالت ۾ آھن:
- ٽاپنگ PRE90 پريampلائفائر يونٽ
- ريموٽ ڪنٽرول
- اي سي پاور ڪيبل
- استعمال ڪندڙ جو دستياب (ھي دستاويز)
- وارنٽي ڪارڊ
Image: The Topping PRE90 preamplifier unit, remote control, AC power cable, user manual, and warranty card are shown. The unit dimensions are approximately 22.2cm (width) x 16.0cm (depth) x 4.5cm (height).
3. پراڊڪٽ ختمview
3.1 فرنٽ پينل
تصوير: سامهون view of the Topping PRE90 preamplifier. It features a display showing input and output status, a multi-function knob on the right, and an input/select button on the left.
The front panel includes a display screen, a multi-function knob for volume control and menu navigation, and an input selection button.
3.2 Rear Panel - Inputs
تصوير: پوئين پاسي view of the Topping PRE90 preamplifier showing input connections. It includes an "EXT" port for expansion, and "INPUT" section with balanced XLR and single-ended RCA input jacks.
The PRE90 supports both balanced and single-ended signal processing. It features an EXT port for connecting an EXT90 input expansion module, and standard XLR and RCA input jacks.
3.3 Rear Panel - Outputs
تصوير: پوئين پاسي view of the Topping PRE90 preamplifier showing output connections. It includes balanced XLR and single-ended RCA output jacks, along with the AC power inlet and power switch.
The PRE90 offers selectable XLR and RCA outputs. The amplified signal can be routed to one or two different amplifiers simultaneously (e.g., "XLR only", "RCA only", or "XLR+RCA").
4. سيٽ اپ
- پاور ڪنيڪشن: Connect the supplied AC power cable to the PRE90's power inlet and then to a suitable power outlet. Ensure the power switch on the rear panel is in the OFF position before connecting.
- ان پٽ ڪنيڪشن:
- For balanced sources (e.g., Topping D90se, D90), use XLR cables to connect to the XLR input jacks.
- For single-ended sources, use RCA cables to connect to the RCA input jacks.
- If using the Topping EXT90 input expansion module, connect it to the "EXT" port.
- Connectاھر ڪنيڪشن:
- Connect the PRE90's XLR outputs to your power amplifier's XLR inputs for balanced signal transmission.
- Connect the PRE90's RCA outputs to your power amplifier's RCA inputs for single-ended signal transmission.
- The PRE90 can output simultaneously via XLR and RCA, allowing connection to two separate amplifiers or a subwoofer.
- شروعاتي پاور آن: After all connections are secure, switch the power button on the rear panel to the ON position. The unit will power on and display its status.
5. آپريٽنگ هدايتون
5.1 بنيادي آپريشن
- پاور آن / آف: Use the power switch on the rear panel.
- ان پٽ چونڊ: Press the "O/SEL" button on the front panel or the corresponding button on the remote control to cycle through available inputs.
- حجم ڪنٽرول: Rotate the multi-function knob on the front panel or use the volume buttons on the remote control to adjust the output volume.
5.2 Safe Volume Feature
Image: The Topping PRE90 preamplifier display showing "Safe Mode On: -20dB" and "OK to restore: +0dB". This indicates the safe volume feature is active.
The Safe Volume feature protects your equipment and hearing by automatically reducing the output volume if the saved volume for a target input or output exceeds a preset safe level. This function can be enabled or disabled in the unit's settings.
5.3 آئوٽ پٽ ڪنفيگريشن
The PRE90 allows configuration of its output mode:
- صرف XLR: Audio signal is sent only through the balanced XLR outputs.
- صرف آر سي اي: Audio signal is sent only through the single-ended RCA outputs.
- ايڪس ايل آر + آر سي اي: Audio signal is sent simultaneously through both XLR and RCA outputs. This is useful for connecting to two separate amplifiers or an amplifier and a subwoofer.
Refer to the user manual for detailed instructions on how to access and change these settings.
5.4 Advanced Features (NFCA Modules)
Image: An internal circuit board of the Topping PRE90, highlighting the NFCA (Nested Feedback Composite Amplifier) modules. These modules contribute to the unit's high dynamic range and low noise floor.
The PRE90 incorporates advanced NFCA (Nested Feedback Composite Amplifier) modules, similar to those found in flagship Topping products. This technology, combined with Ultra High Gain Feedback (UHGF), ensures excellent DC and AC performance, ultra-low noise, and a high dynamic range for a clean audio signal.
6. سار سنڀال
- صفائي: يونٽ کي صاف ڪرڻ لاءِ نرم، سڪل ڪپڙو استعمال ڪريو. رگڙيندڙ صاف ڪندڙ يا محلولن کان پاسو ڪريو.
- وينٽيليشن: يونٽ جي چوڌاري مناسب وينٽيليشن کي يقيني بڻايو وڃي ته جيئن وڌيڪ گرم ٿيڻ کان بچي سگهجي. وينٽيليشن جي سوراخن کي بند نه ڪريو.
- بجلي بند: Always power off the unit and disconnect it from the power outlet before performing any cleaning or maintenance.
7. مسئلا حل ڪرڻ
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| طاقت نه آهي | Power cable not connected; Power switch off; Power outlet malfunction. | پاور ڪيبل ڪنيڪشن چيڪ ڪريو؛ پڪ ڪريو ته پاور سوئچ آن آهي؛ ٻئي ڊوائيس سان پاور آئوٽليٽ جي جانچ ڪريو. |
| ڪوبه آواز ٻاھر نه | Incorrect input selected; Output cables not connected; Volume too low; Ampبند ڪرڻ وارو. | Select correct input; Check output cable connections; Increase volume; Ensure connected ampلائفائر تي آهي. |
| ريموٽ ڪنٽرول غير جوابدار | Line of sight blocked; Batteries low/dead; Remote too far or misaligned. | Ensure clear line of sight to the unit's IR receiver; Replace remote batteries; Aim directly at the unit from a closer distance. |
| بگڙيل آواز | Input signal too strong; Faulty cables; Connected equipment malfunction. | Reduce input signal level; Check and replace cables; Test with different source/ampوierيڪ زنده |
8. وضاحتون
Image: A detailed table outlining the technical parameters of the Topping PRE90 preamplifier, including THD+N, SNR, Dynamic Range, Frequency Response, Output Level, Noise Level, Channel Crosstalk, Channel Balance, IMD, Input Sensitivity, Volume Range, Output Impedance, and Output DC Configuration for various input/output modes (SE/SE, BAL IN/SE OUT, SE IN/BAL OUT, BAL IN/BAL OUT).
Key specifications for the Topping PRE90 Preamplifier are provided in the table above. For general information:
- ماڊل: PRE90
- ٺاهيندڙ: ٽاپنگ
- پيڪيج جي ماپ: 15.24 x 11.38 x 4.02 انچ
- شيء جو وزن: 0.634 اونس
- پهريون دستياب: ڊسمبر 8، 2020
9. وارنٽي ۽ سپورٽ
The Topping PRE90 Preamplifier comes with a warranty period. Please refer to the included warranty card for specific terms and conditions. Generally, a one-year free repair period is provided, which may vary by brand and region.
For any questions, technical assistance, or support inquiries, please contact the AOSHIDA Audio after-sales team. They offer 24-hour online service and a 30-day return policy.
رابطي جي ڄاڻ: Refer to your purchase documentation or the AOSHIDA Audio webسڀ کان تازي سپورٽ رابطي جي تفصيلن لاءِ سائيٽ.
