ايم 5 اسٽيڪ ڪي 010

M5Stack Core2 IoT ڊولپمينٽ ڪٽ يوزر مينوئل

ماڊل: K010

1. تعارف

The M5Stack Core2 is a versatile IoT development kit designed for rapid prototyping and deployment of various applications. It features an ESP32-D0WDQ6-V3 microcontroller, a 2-inch TFT LCD touch screen, and integrated Wi-Fi and Bluetooth connectivity. This manual provides essential information for setting up, operating, and maintaining your Core2 device.

M5Stack Core2 IoT Development Kit hero image

Figure 1.1: M5Stack Core2 IoT Development Kit, showcasing ان جي ڪمپيڪٽ ڊيزائن ۽ ڊسپلي.

2. دٻي ۾ ڇا آهي

پڪ ڪريو ته هيٺ ڏنل سڀئي شيون توهان جي پيڪيج ۾ شامل آهن:

M5Stack Core2 and included accessories: USB-C cable and hex wrench

Figure 2.1: Contents of the M5Stack Core2 package, including the Core2 unit, USB-C cable, and hex wrench.

Diagram showing Core2, USB Type-C cable, and hex wrench as package contents

Figure 2.2: Visual representation of the shipping list for the M5Stack Core2.

3. پراڊڪٽ ختمview

The M5Stack Core2 is built around the ESP32-D0WDQ6-V3 chip, offering robust performance for various applications. Key features include:

تفصيلي view of M5Stack Core2 with labels for components like touch screen, ESP32, USB-C, SD card, LED, PWR, RST

Figure 3.1: Annotated diagram of the M5Stack Core2, highlighting its main components and interfaces.

سامهون view of M5Stack Core2 with callouts for power indicator light, built-in speaker, 16M Flash, 8M PSRAM, and capacitive touch screen

Figure 3.2: Key features of the M5Stack Core2, including memory and display type.

4. وضاحتون

The following table details the technical specifications of the M5Stack Core2:

تفصيلپيرا ميٽر
SoCESP32-D0WDQ6-V3, 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
چمڪ16 ايم بي
پي ايس آر ايم8 ايم بي
انٽ واليمtage5V @ 500mA
ميزبان انٽرنيٽٽائپ-سي x 1، گروو (I2C+I/O+UART) x 1
ايل اي ڊيگرين پاور اشارو روشن ڪيو
بٽڻPower button, RST button, screen virtual buttons x 3
وائبريشن الرٽوائبريشن موٽر
شيءِ جو وزن2.82 آونس (تقريبن 80 گرام)
پيڪيج جي ماپ3.19 x 2.28 x 0.87 انچ
بيٽريون1 ليتيم آئن بيٽري (شامل)
M5Stack Core2 on a digital scale showing 54.9 grams

Figure 4.1: M5Stack Core2 weight measurement.

M5Stack Core2 with dimensions: 54mm x 54mm x 16.5mm

Figure 4.2: M5Stack Core2 dimensions.

5. سيٽ اپ

To begin using your M5Stack Core2, follow these initial setup steps:

  1. چارج ڪرڻ: Connect the M5Stack Core2 to a 5V USB power source using the provided USB Type-C cable. The device will begin charging.
  2. پاور آن: Press and hold the power button (usually located on the side) for approximately 6 seconds to turn on the device.
  3. سافٽ ويئر ماحول: The Core2 supports various development environments, including UIFlow, Arduino, and MicroPython. Choose your preferred environment and set up the necessary drivers and IDE on your computer.
  4. پهريون پروگرام: Refer to the official M5Stack documentation for guides on uploading your first program or firmware to the Core2.

6. آپريٽنگ هدايتون

The M5Stack Core2 is designed for flexible operation depending on your application. Here are general guidelines:

7. سار سنڀال

Proper maintenance ensures the longevity and optimal performance of your M5Stack Core2:

8. مسئلا حل ڪرڻ

This section addresses common issues you might encounter with your M5Stack Core2.

Q1: What is the maximum supported capacity of the SD card, and why is there no response when the SD card is inserted?
Theoretically, devices based on ESP32 support up to 16GB. We recommend using a SD card model SDSQUNC-016G-ZN6MA. Ensure the SD card is properly inserted and formatted.
Q2: Using the battery in either of the battery ports on the USB unit or the Core2 forces the unit to stay powered on continuously. Any attempt to shut down using the side button causes the device to restart after.
We have found that the reason is that the filter capacitor capacity of the USB 1.2 module is too large. If you still need to use batteries to power the Core2 + USB 1.2 solution, to avoid frequent restarts, the following two solutions can be adopted:
  • Remove the filter capacitor.
  • Replace it with a smaller capacity filter capacitor (10uF is recommended).
Q3: How to extend the Core2 with an extension module?
You must remove the original bottom and battery of the Core2, then you can stack another module extension.
FAQ section image with questions and answers regarding SD card, battery issue, and extension modules

Figure 8.1: Common questions and solutions for the M5Stack Core2.

9. درخواست جو دائرو

The M5Stack Core2 is suitable for a wide range of applications, including but not limited to:

Collage of M5Stack Core2 applications: Smart home devices, STEM education, IoT controller, DIY projects

شڪل 9.1: مثالamples of M5Stack Core2 applications.

Visual representation of M5Stack Core2's scope of application

Figure 9.2: Further illustration of the M5Stack Core2's versatile applications.

10. مدد ۽ وسيلا

For more detailed tutorials, documentation, and community support, please visit the official M5Stack webسائيٽ:

www.m5stack.com

Instructions on how to access tutorials on the M5Stack webسائيٽ

Figure 10.1: Guide to accessing online tutorials and documentation.

ايم 5 اسٽيڪ website logo and URL

Figure 10.2: Official M5Stack webحمايت لاء سائيٽ.

لاڳاپيل دستاويز - ڪي 010

اڳيview M5Stack CORE2: ESP32 ڊولپمينٽ بورڊ ختمview ۽ جلدي شروع ڪرڻ جي ھدايت
M5Stack CORE2 لاءِ جامع گائيڊ، هڪ ESP32 تي ٻڌل ڊولپمينٽ بورڊ جنهن ۾ 2 انچ جي TFT اسڪرين آهي، ان جي هارڊويئر، فنڪشن، پاور مئنيجمينٽ، ۽ UIFlow ڪوئڪ اسٽارٽ جي تفصيل سان.
اڳيview M5STACK STAMPS3 ڊيٽا شيٽ ۽ ٽيڪنيڪل وضاحتون
M5STACK ST جي ڳولا ڪريوAMPS3 ڊولپمينٽ بورڊ، وائي فائي ۽ بلوٽوٿ 5 (LE) سان گڏ ESP32-S3 چپ جي خاصيت. هي ڊيٽا شيٽ ان جي هارڊويئر جي جوڙجڪ، پن جي وضاحت، فنڪشنل صلاحيتن، ۽ IoT منصوبن لاءِ برقي خاصيتن جي تفصيل ڏئي ٿي.
اڳيview M5Stack AtomS3-Lite ESP32-S3 ڊولپمينٽ بورڊ
M5Stack AtomS3-Lite کي ڳولهيو، هڪ ڪمپيڪٽ ESP32-S3 ڊولپمينٽ بورڊ جيڪو وائي فائي، انٽيگريٽڊ اينٽينا، ۽ IoT ۽ ​​مائڪرو ڪنٽرولر پروجيڪٽس لاءِ ورسٽائل انٽرفيس جي خاصيت رکي ٿو. Arduino IDE ۽ UiFlow2 سان ان جي وضاحتن، خاصيتن ۽ ڊولپمينٽ آپشنز بابت سکو.
اڳيview M5StickC Plus2 آپريشن گائيڊنس
M5StickC Plus2 IoT ڊولپمينٽ بورڊ لاءِ جامع آپريشن گائيڊنس. هي گائيڊ عام خرابين جي حل جي منظرنامي کي ڍڪي ٿو، جنهن ۾ بوٽ ناڪامي ۽ بيٽري جا مسئلا شامل آهن، ۽ M5Burner ٽول استعمال ڪندي سرڪاري فرم ويئر کي چمڪائڻ لاءِ تفصيلي، قدم بہ قدم هدايتون مهيا ڪري ٿو، جنهن ۾ ضروري USB ڊرائيور انسٽاليشن ۽ پورٽ چونڊ طريقا شامل آهن.
اڳيview ايم 5 اسٽيڪ اسٽريٽamp-S3Bat يوزر مينوئل ۽ ڪوئڪ اسٽارٽ گائيڊ
M5STACK St لاءِ جامع يوزر مينوئل ۽ جلدي شروعات گائيڊamp-S3Bat, an ESP32-S3-based embedded core module. It details the module's features, specifications, setup procedures for Arduino IDE, Wi-Fi scanning, BLE scanning, and includes FCC compliance information. This guide helps developers quickly build IoT applications.
اڳيview M5STAMP C3 ESP32 IoT ڊولپمينٽ بورڊ يوزر مينوئل
M5ST جي ڳولا ڪريوAMP C3، M5Stack جو سڀ کان ننڍو ESP32 سسٽم بورڊ. هي دستورالعمل ان جي خاصيتن، وضاحتن جي تفصيل ڏئي ٿو، ۽ Arduino IDE، بلوٽوٿ، ۽ وائي فائي ڊولپمينٽ لاءِ تڪڙي شروعات جي رهنمائي فراهم ڪري ٿو، ان کي IoT ايپليڪيشنن لاءِ مثالي بڻائي ٿو.