Danfoss Aero RAVL Thermostatic Radiator Valve

تعارف

This manual provides essential information for the installation, operation, and maintenance of your Danfoss Aero RAVL Thermostatic Radiator Valve, Model 015G4550. This device is designed to regulate room temperature efficiently, contributing to energy savings and enhanced comfort. Please read these instructions carefully before installation and use to ensure proper function and safety.

حفاظت جي ڄاڻ

• Always ensure the heating system is depressurized and cooled before attempting any installation or maintenance.
• جيڪڏهن توهان کي ڪنهن به قدم بابت پڪ ناهي ته انسٽاليشن هڪ قابل پيشه ور طرفان ڪئي وڃي.
• Do not attempt to modify the valve or its components. Use only genuine Danfoss parts for replacements.
• Keep packaging materials out of reach of children to prevent suffocation hazards.
• Ensure the valve is not exposed to extreme temperatures outside its operating range (7-28°C).

پيداوار ختمview

The Danfoss Aero RAVL Thermostatic Radiator Valve is a modern, gas-filled thermostatic head designed for precise temperature control. It features a fast response time of approximately 10 minutes and offers tactile feedback for every 0.5°C temperature change. The design allows for easy, tool-free mounting and is compatible with Danfoss RAVL type valve housings.

اهم خاصيتون:

• Gas-filled thermostatic bellow for rapid response.
• Integrated sensor for accurate temperature detection.
• Temperature range: 7°C to 28°C.
• Tactile feedback for precise temperature adjustments.
• Tool-free mounting with audible click confirmation.
• Optimized temperature scale with a 3°C gap between values.

اجزاء:

• Thermostatic Head (Aero RAVL)
• Mounting Ring/Clamp
• مربوط سينسر

شڪل 1: سامهون view of the Danfoss Aero RAVL Thermostatic Radiator Valve. This image displays the main body of the valve head with its temperature setting dial and the red indicator for the current setting.

شڪل 2: پاسي view of the Danfoss Aero RAVL Thermostatic Radiator Valve, highlighting its compatibility with RAVL 26mm connections. The image shows the connection mechanism at the base of the thermostatic head.

تنصيب

Proper installation is crucial for the optimal performance of your thermostatic radiator valve. Follow these steps carefully.

مطابقت جي چڪاس:

The Danfoss Aero RAVL thermostatic head is specifically designed for Danfoss RAVL valve bodies with a 26 mm mounting diameter. Ensure your existing valve body is compatible before proceeding with installation.

Figure 3: Compatibility guide for replacing old Danfoss radiator thermostats. This chart illustrates that the Aero™ RA/VL head is suitable for RAVL valve bodies with a 26 mm valve diameter.

Figure 4: Technical diagram of a Danfoss RAVL valve body, indicating the 26 mm diameter for proper head attachment. This diagram helps identify the correct valve type.

Figure 5: Installation diagram showing the Danfoss Aero™ RA/VL thermostatic head fitting onto an old Danfoss RA/VL valve with a 26 mm mounting diameter. The image highlights the clamp ring connection for identification.

لڳائڻ جون هدايتون:

1. Prepare the Valve Body: Ensure the existing RAVL valve body is clean and free from debris. If replacing an old thermostatic head, remove it carefully.
2. Set the Thermostatic Head: Turn the setting dial on the new Aero RAVL head to its maximum setting (usually '5' or '28°C') to fully retract the pin.
3. سر کي پوزيشن ڏيو: Place the Aero RAVL thermostatic head onto the RAVL valve body. Ensure it is aligned correctly.
4. Secure the Mounting Ring: Push the mounting ring firmly onto the valve body until you hear an audible 'click'. This confirms the head is securely attached. No tools are required for this step.
5. انسٽاليشن جي تصديق ڪريو: Gently try to rotate the head. It should be firmly attached and not wobble.

آپريٽنگ هدايتون

The Danfoss Aero RAVL valve allows for manual temperature control to maintain your desired room temperature.

درجه حرارت جي ترتيب:

• The thermostatic head features a numbered dial (typically 1 to 5, or a temperature scale from 7°C to 28°C).
• Rotate the dial to your desired temperature setting. Each click provides tactile feedback, indicating a 0.5°C change in the set point.
• Setting '❄' (Frost Protection): This setting maintains a minimum temperature (around 7°C) to prevent pipes from freezing.
• Setting '1' (Approx. 14°C): A lower comfort temperature.
• Setting '3' (Approx. 20°C): A common comfort temperature for living areas.
• Setting '5' (Approx. 28°C): Maximum heating.
• The valve will automatically adjust the flow of hot water to the radiator to maintain the selected room temperature.

Figure 6: The Danfoss Aero RAVL thermostatic valve installed on a radiator within a room setting. This illustrates the product's appearance when in use.

سار سنڀال

The Danfoss Aero RAVL thermostatic valve requires minimal maintenance to ensure long-term performance.

• صفائي: Wipe the exterior of the thermostatic head with a soft, damp ڪپڙو. گھڙڻ وارا صاف ڪندڙ يا محلول استعمال نه ڪريو، ڇاڪاڻ ته اهي مٿاڇري کي نقصان پهچائي سگهن ٿا.
• مٽي هٽائڻ: Periodically remove any dust accumulation from the valve and radiator to ensure proper air circulation around the integrated sensor.
• فنڪشن چيڪ: Annually, rotate the dial through its full range of settings to ensure smooth operation and prevent internal components from sticking.
• رڪاوٽ کان بچو: Ensure that curtains, furniture, or other objects do not obstruct the thermostatic head, as this can interfere with accurate temperature sensing.

مشڪلاتون

If you experience issues with your thermostatic radiator valve, consult the table below for common problems and solutions.

وضاحتون

وارنٽي ۽ سپورٽ

Danfoss products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Danfoss website. For technical support, spare parts, or service inquiries, please contact your local Danfoss representative or authorized dealer.

توهان وڌيڪ معلومات ۽ سپورٽ وسيلا ڳولي سگهو ٿا ايميزون تي ڊين فاس اسٽور.